LINEO 200 ES
Energy saving mixed flow extractor fans
CODE: 17167
Brand: VORTICE
Certifications
- CE
- UKCA
- CB TEST CERTIFICATE
Description
- Enclosures made of fire-resistant plastic resin, E2 class, according to ISO EN 11925-2:2010, in areas close to motor and electrical components.
- Nominal diameter: 200 mm.
- EC (brushless) motor, thermally protected, with shaft mounted on ball bearing supports, coupled with a centrifugal impeller.
- High water resistance: IPX5 (if installed in a duct).
- Equipped with a thermal fuse overheating safety device.
- Speed adjustable through potentiometer (0-10V signal) or two-speed switch (to be set at the installation in a preset range).
Technical and Performance Data
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Max absorbed current at 2V (A) | 0.09 | Max pressure at 4V (Pa) | 90.2 |
| Frequency (Hz) | 50-60 | Max pressure at 6V (Pa) | 141.2 |
| Insulation class | II | Max pressure at 10V (mmH2O) | 34.9 |
| IP | 45 | Max pressure at 4V (mmH2O) | 9.2 |
| Max absorbed current at 10V (A) | 0.80 | Max pressure at 6V (mmH2O) | 14.4 |
| Max absorbed current at 4V (A) | 0.19 | Max pressure at 8V (mmH2O) | 24 |
| Max absorbed current at 6V (A) | 0.28 | Max pressure at 8V (Pa) | 235.4 |
| Max absorbed current at 8V (A) | 0.53 | Max airflow at 2V (l/s) | 86.1 |
| Max absorbed power at 10V (W) | 90 | Max airflow at 2V (m³/h) | 310 |
| Max absorbed power at 4V (W) | 15.8 | Sound power Lw [dB(A)] INTAKE - at 2V | 59.1 |
| Max absorbed power at 6V (W) | 25.7 | Sound power Lw [dB(A)] DUCT OUTLET - at 2V | 58.2 |
| Max absorbed power at 8V (W) | 52.8 | Max pressure at 2V (mmH2O) | 3 |
| Max ambient temperature for continuous operation (°C) | 50 | Max pressure at 2V (Pa) | 29.4 |
| Nominal diameter (mm) | 200 | Sound pressure Lp [dB(A)] 3m INTAKE - at 2V | 41.6 |
| Ø Discharge hole (mm) | 200 | Sound pressure Lp [dB(A)] 3m DUCT OUTLET - at 2V | 40.6 |
| Max absorbed power at 2V (W) | 6.3 | Sound pressure Lp [dB(A)] 3m RADIATED - at 2V | 16.9 |
| Voltage (V) | 220-240 | RPM 2V | 760 |
| Weight (Kg) | 4.6 | RPM at 10V | 2680 |
| Breakout sound power at 10V Lw [dB(A)] | 65 | RPM at 4V | 1380 |
| Breakout sound power at 2V LWA [dB(A)] | 37.5 | RPM at 6V | 1700 |
| Breakout sound power at 4V Lw [dB(A)] | 55.6 | RPM at 8V | 2220 |
| Breakout sound power at 6V Lw [dB(A)] | 60.4 | Sound power at extract side at 10V speed LWA [dB(A)] | 89.4 |
| Breakout sound power at 8V Lw [dB(A)] | 62.8 | Sound power at extract side at 4V speed LWA [dB(A)] | 78.5 |
| Breakout sound pressure at 3m at 10V Lp [dB(A)] | 44.5 | Sound power at extract side at 6V speed LWA [dB(A)] | 83.9 |
| Breakout sound pressure at 3m at 4V Lp [dB(A)] | 35.1 | Sound power at extract side at 8V speed LWA [dB(A)] | 86.9 |
| Breakout sound pressure at 3m at 6V Lp [dB(A)] | 39.9 | Sound power at supply side at 10V speed LWA [dB(A)] | 88.4 |
| Breakout sound pressure at 3m at 8V Lp [dB(A)] | 42.3 | Sound power at supply side at 4V speed LWA [dB(A)] | 77.5 |
| Max airflow at 10V (l/s) | 305.6 | Sound power at supply side at 6V speed LWA [dB(A)] | 82.9 |
| Max airflow at 10V (m³/h) | 1100 | Sound power at supply side at 8V speed LWA [dB(A)] | 85.4 |
| Max airflow at 4V (l/s) | 155.6 | Sound pressure at extract side at 3m at 10V Lp [dB(A)] | 71.9 |
| Max airflow at 4V (m³/h) | 560 | Sound pressure at extract side at 3m at 4V Lp [dB(A)] | 60.9 |
| Max airflow at 6V (l/s) | 194.4 | Sound pressure at extract side at 3m at 6V Lp [dB(A)] | 66.4 |
| Max airflow at 6V (m³/h) | 700 | Sound pressure at extract side at 3m at 8V Lp [dB(A)] | 69.4 |
| Max airflow at 8V (l/s) | 255.6 | Sound pressure at supply side at 3m at 10V Lp [dB(A)] | 70.8 |
| Max airflow at 8V (m³/h) | 920 | Sound pressure at supply side at 3m at 4V Lp [dB(A)] | 60 |
| Max pressure at 10V (Pa) | 342.3 | Sound pressure at supply side at 3m at 6V Lp [dB(A)] | 65.3 |
| Sound pressure at supply side at 3m at 8V Lp [dB(A)] | 67.9 |
Performance Curve
The performance curve graph illustrates the relationship between airflow (measured in m³/h and l/s) on the x-axis and pressure (measured in Pa and mmH2O) and power (measured in W) on the y-axis. Multiple colored lines represent different operating speeds, indicated as 2V, 4V, 6V, 8V, and 10V.
Dimensions
A diagram illustrates the fan unit with various measurement points labeled A through N, indicating different dimensions of the fan housing and connections.
| Dimension | Value (mm) |
|---|---|
| A | 270 |
| B | 372.5 |
| C | 396 |
| D | Ø 194.5 |
| E | 195 |
| F | 330 |
| G | 190 |
| H | 120 |
| L | 155 |
| M | 5.5 |
| N | 280 |
Accessories
- C TEMP (Code 12992)
- C SMOKE (Code 12993)
- C TIMER (Code 12994)
- C HCS (Code 12994)
- C PIR (Code 12998)
- C TIMER (Code 12999)
- POT-IT (Code 12826)
- POT (Code 12828)
For Information
ITALY
Pre Sales: prevendita@vortice-italy.com
After Sales: postvendita@vortice-italy.com
UNITED KINGDOM & REP. OF IRELAND
Sales Dept: sales@vortice.ltd.uk
Technical Dept: technical@vortice.ltd.uk
OTHER COUNTRIES
Sales Dept: export@vortice-italy.com
After Sales: after-sales@vortice-italy.com
