Vonhaus 3000423 TV Unit

Product Specifications

Important Safety Information

• ⚠️ Do not use power tools for assembly.
• ⬆️ Do not climb on the unit.
• ? Do not jump on the unit.
• Periodically re-tighten all fixings every 6 months.
• Relocation: Never drag the item. This may cause damage to fixtures and make the item unstable. Disassemble where appropriate before moving.

Components

• Component 1: Base Panel
• Component 2: Top Panel
• Component 3: Left Side Panel
• Component 4: Central Divider
• Component 5: Right Side Panel
• Component 6: Shelf
• Component 7: Back Support Rail
• Component 8: Drawer Front Panel
• Component 9: Door
• Component 10: Legs (4x)
• Component 11: Adjustable Foot (part of legs)

Hardware

• A (8x): Cam Bolt
• B (8x): Cam Lock
• C (14x): Wooden Dowel
• D (6x): Long Screw
• E (24x): Medium Screw
• F (8x): Leg Fixing Bracket
• G (12x): Short Screw
• H (2x): Hinge Set
• I (6x): Drawer Runner Screw
• J (6x): Drawer Runner

Assembly Instructions

1. Step 1

   Insert eight cam bolts (A) into the designated holes on the base panel (1).

2. Step 2

   Attach the back support rail (7) to the base panel (1) using two cam bolts (A), two cam locks (B), and two wooden dowels (C).

3. Step 3

   Attach the left side panel (3), central divider (4), and right side panel (5) to the base panel (1) using six cam locks (B) and six wooden dowels (C).

4. Step 4

   Attach the top panel (2) to the side panels (3, 5) and central divider (4) using six long screws (D) and six wooden dowels (C).

5. Step 5

   Attach the four legs (10) to the underside of the base panel (1) using twenty-four medium screws (E). Component 11 is the adjustable foot; unscrew it to adjust the height to prevent the unit dipping in the centre.

6. Step 6

   Slide the shelf (6) into the designated slots. Attach the door (9) to the unit.

7. Step 7

   Attach the hinges (H) to the door (9) using four short screws (G). Attach the corresponding hinge parts to the main unit using two short screws (G).

8. Step 8

   Attach the door (9) with hinges to the main unit using eight short screws (G). The diagram shows a sequence for adjusting the hinges.

9. Step 9

   Attach the drawer runners (J) to the inside of the unit and to the drawer front (8) using six drawer runner screws (I). The diagram shows two runners attached to the unit and two to the drawer front.

10. Step 10

    Assembly is complete. ✔️

General Care and Maintenance

• Do not clean the product with abrasive cloths or chemicals. Solvents or detergents can damage the surface.
• Periodically check and re-tighten fittings where applicable. Re-tighten all fittings after the first week following assembly.
• To clean, sponge down with warm water, a soft cloth, and mild detergent.
• Ensure you have all the pieces listed. If any components are missing, contact customer services.

Disposal, Warranty & Customer Service

• Disposal: Please recycle where facilities exist. Check with your local authority for recycling advice.
• Warranty: To register your product and find out if you qualify for a free extended warranty, please visit www.vonhaus.com/warranty. Retain proof of purchase.
• Customer Service: If you are having difficulty using this product and require support, please contact support@domu.co.uk.
• Copyright © DOMU Brands.