VonHaus 3000251 Table Top TV Stand and Bracket
Thank you for purchasing your VonHaus product.
Important Safety Information & Usage Guidelines
Please read all instructions carefully before use and retain for future reference.
Intended Use: This product is not intended for outdoor use, as a climbing structure, or as a toy. Children should be supervised to ensure they do not play with the product.
General Safety: The assembly pack may contain small parts which can pose a choking hazard to children and pets ⚠️. Place the product on solid and even ground. Only use in an upright, stable position. Do not overload the product as this may result in damage or personal injury.
Weight Limit: Maximum Load: 40kg / 88lbs.
Assembly Time: Estimated Assembly Time: 10 minutes.
Assembly Precautions:
- Do not use power tools for assembly ??️.
- Do not climb on the product ??.
- Do not jump on the product ??.
- Periodically check and re-tighten fittings. Re-tighten all fittings after the first week following assembly. Re-tighten fixings every 6 months ⚙️?.
Cleaning & Maintenance: Do not clean the product with abrasive cloths or chemicals. Solvents or detergents can damage the surface. To clean, sponge down with warm water, a soft cloth, and mild detergent.
Missing Components: If you are missing any components, contact customer services at support@domu.co.uk. Do not proceed with assembly if any components are missing.
Components
Ensure you have all the parts listed below before assembly.
No. | Part Description | Part Sketch Map | Qty |
---|---|---|---|
1 | Panel | [Flat rectangular panel with holes] | x1 |
2 | Support Bar | [Long cylindrical bar] | x1 |
3 | Base Bracket | [U-shaped bracket with multiple holes] | x1 |
4 | Vertical Support Rails | [Two long rails with slots] | x2 |
A | Bolt | [Bolt head with thread] | x6 |
B | Nut | [Hexagonal nut] | x4 |
C | Washer | [Flat circular washer] | x1 |
D | Clip | [Small clip-like fastener] | x2 |
E | Screw | [Screw with flat head] | x1 |
F | Screw | [Screw with flat head] | x1 |
G | Screw | M6x40 | x4 |
H | Screw | M6x30 | x3 |
I | Screw | [Screw with flat head] | x2 |
J | Screw | M5x30 | x2 |
K | Allen Key | 4mm | x1 |
L | Allen Key | 5mm | x1 |
M | Wrench | [Small wrench] | x1 |
Screws for TV (PACK)
No. | Part Description | Part Sketch Map | Qty |
---|---|---|---|
1 | M4x15 | [Small screw] | 4 |
2 | M4x30 | [Medium screw] | 4 |
3 | M6x15 | [Medium screw] | 4 |
4 | M6x30 | [Medium screw] | 4 |
5 | M8x15 | [Large screw] | 4 |
6 | M8x45 | [Long screw] | 4 |
7 | 5mm | [Washer] | 4 |
8 | 10mm | [Washer] | 4 |
9 | Washer φ 4/8 | [Flat circular washer] | 4/4 |
Assembly Instructions
Step 1
Attach part C (x1) to part 1 using screws A (x6) and Allen key K (4mm). Then, attach part F (x1) to part 1 using screws H (M6x30 x3). Finally, attach part 4 (x2) to part 1 using screws I (x2).
Step 2
Attach part 2 (x1) to part 3 (x1) using screws G (M6x40 x4) and nuts B (x4). Use wrench M (x1) to tighten. Then, attach the assembled part 2/3 to part 4 (x2) using screws E (x1) and Allen key K (4mm).
Step 4a: Choose Screws for TV
Select the appropriate screws and washers from the 'Screws for TV (PACK)' list based on your television's VESA mounting holes. The diagram shows examples of screw types and their corresponding VESA hole patterns.
- For VESA 75x75, 100x100, 200x100, 200x200, 300x200, 400x200, 400x300, 400x400: Use screws 1-6 with appropriate washers 7-9.
- Ensure screws are not too long or too short.
Step 5: Mount TV
Attach the assembled bracket to the back of your TV using the selected screws and washers from Step 4a. Ensure the bracket is securely fastened. Then, lift the TV and bracket assembly and hook it onto the vertical support rails (part 4) attached to the base. Secure the TV to the rails using clips D (x2) and screws J (M5x30 x2). Use Allen key L (5mm) to tighten. Ensure the safety lock mechanism is engaged.
Thank You
Thank you for purchasing your product/appliance. Should you require further assistance with your purchase, you can contact us at support@domu.co.uk.
VonHaus is a registered trademark of DOMU Brands Ltd. Made in China for DOMU Brands. M24 2RW.