VonHaus 2500878 Assembly Instructions

Safety Warnings and Guidelines

• Maximum Load: 110kg / 242lb
• Estimated Assembly Time: 180 minutes
• Do not climb on the product.
• Do not jump on the product.
• Do not use power tools for assembly.
• Periodically re-tighten fixings (every 6 months).
• When relocating the item, do not drag it. Disassemble if necessary to avoid damage and instability.

Intended Use and General Safety

This product is intended for indoor use only and is not a toy or a climbing structure. Children should be supervised to ensure they do not play with the product.

Before First Use: Follow all assembly steps as outlined. Assemble the product close to its intended position and in a suitable area where it will not create an obstruction. Keep away from sources of combustion.

The assembly pack may contain small parts that pose a choking hazard. Place on solid and even ground. Use only in an upright, stable position. Do not overload the product to prevent damage or injury.

Cleaning & Maintenance

Do not use abrasive cloths or chemicals. Solvents or detergents can damage the surface. Clean with warm water, a soft cloth, and mild detergent. Periodically check and re-tighten fittings. Re-tighten all fittings after the first week following assembly.

Ensure all components are present before assembly. If any parts are missing, contact customer services at support@domu.co.uk. Do not proceed with assembly if components are missing.

Assembly Steps

The following steps detail the assembly process. Ensure you have all parts listed before commencing.

1. Step 1: Attach part B to part D using 2x P screws and 2x Y washers.
2. Step 2: Attach part F to the structure using 5x P screws and 5x Y washers.
3. Step 3: Attach part U to the structure using part X and 7-hole part V.1.
4. Step 4: Complete the main sofa structure with part R.
5. Step 5: Attach part E to part A using 2x P screws and 2x Y washers.
6. Step 6: Attach part C to the structure using 4x P screws and 4x Y washers.
7. Step 7: Attach part H to the structure using part X and 6-hole part V.2.
8. Step 8: Complete the chaise lounge structure with part S.
9. Step 9: Attach part L to parts M using 4x X screws.
10. Step 10: Attach parts N to the structure using 8x X screws.
11. Step 11: Place part O onto the assembled structure.

Parts List Reference:

• A, B, C, D, E, F, G, H, L, M, N, O, P, Q, R, S, U, X, Y, Z
• V.1 (7 holes)
• V.2 (6 holes)
• Screws: P (various quantities), X (various quantities)
• Washers: Y (various quantities)
• Specific screws and washers are indicated in each step.

Note: Part V.1 has 7 holes and part V.2 has 6 holes. Please use V.1 first during step 3.

Customer Information

Disposal Information: Please recycle where facilities exist. Check with your local authority for recycling advice.

Customer Service: If you require assistance with your product, please contact support@domu.co.uk.

Warranty: Register your product at www.vonhaus.com/warranty to qualify for a free extended warranty. Retain proof of purchase. The warranty is valid only if the product is used as indicated and all instructions are followed. Misuse or improper use will invalidate the warranty. Returned goods must be in original packaging with a completed returns form. This does not affect your statutory rights.

Copyright: All material in this manual is copyrighted by DOMU Brands. Unauthorized use may violate copyright and other laws.

Thank you for purchasing your VonHaus product.