MEAN WELL LOP-200 Series 200W 4"x2" Low Profile Open Frame Power Supply

Features

MEAN WELL Patent Number: ZL 202223277512.1
4"x2" compact size with low profile (25.4mm)
80~264Vac input with PFC, No load power consumption<0.5W
Global certificates in multi-fields (ITE 62368-1, Medical 60601-1, Household 60335-1, Industrial 61558-1/-2-16)
150% peak load @ 3s
140W convection, 200W with FAN (10.98CFM forced-cooled)
Suitable for Class I or Class II installations
Over voltage category III (OVC III)
-40 ~ +80°C wide range operation temperature
High efficiency up to 94%
Protections: Short circuit / Overload / Over voltage / Over temperature
Extremely low leakage current
Operating altitude up to 5000 meters
Built-in 12V/0.5A for external FAN
3 years warranty

Description

The LOP-200 is a 200W highly reliable green PCB type low profile power supply with a high power density (25W/in³) on the 4" by 2" footprint. It accepts 80~264VAC input and offers various output voltages between 12V and 54V. The working efficiency is up to 94% and the extremely low no load power consumption is down below 0.5W.

The LOP-200 is able to be used for both Class I (with FG) and Class II (no FG) system design. The LOP-200 is equipped with complete protection functions. It is complied with the international safety regulations such as IEC/BS EN/EN/UL62368-1, IEC/BS EN/EN60335-1, IEC/BS EN/EN61558-1/-2-16, IEC/BS EN/EN60601-1. The LOP-200 serves as a high price-to-performance power supply solution for various industrial applications. The extremely low leakage current is less than 500 µA. In addition, it conforms to the international medical regulations (2*MOPP) and EMC BS EN/EN55011, perfectly fitting all kinds of BF rated "patient contact" medical system equipment.

Applications

Industrial automation machinery
Industrial control system
Mechanical and electrical equipment
Electronic instruments, equipments or apparatus
Power sourcing equipment of PoE
Medical devices

Specification

MODEL	LOP-200-12	LOP-200-15	LOP-200-18	LOP-200-24	LOP-200-27	LOP-200-36	LOP-200-48	LOP-200-54
DC VOLTAGE	12V	15V	18V	24V	27V	36V	48V	54V
CURRENT	Peak(3sec.)	25A	20A	16.7A	12.5A	11.1A	8.3A	6.3A	5.6A
	10.98CFM	16.7A	13.4A	11.1A	8.4A	7.5A	5.6A	4.2A	3.8A
	Convection	11.7A	9.4A	7.8A	5.9A	5.3A	3.9A	3.0A	2.7A
RATED POWER	Peak(3sec.)	300W	300W	300.6W	300W	299.7W	298.8W	302.4W	302.4W
	10.98CFM	200.4W	201W	199.8W	201.6W	202.5W	201.6W	201.6W	205.2W
	Convection	140.4W	141W	140.4W	141.6W	143.1W	140.4W	144W	145.8W
RIPPLE & NOISE (max.) Note.2	120mVp-p	150mVp-p	180mVp-p	200mVp-p	200mVp-p	250mVp-p	250mVp-p	250mVp-p
VOLTAGE ADJ. RANGE (MAIN OUTPUT)	11.4~12.6V	14.3~15.8V	17.1~18.9V	22.8~25.2V	25.6~29V	34.2~37.8V	45.6~50.4V	52~58V
VOLTAGE TOLERANCE Note.3	±3.0%	±3.0%	±3.0%	±2.0%	±1.0%	±1.0%	±1.0%	±1.0%
LINE REGULATION	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%
LOAD REGULATION	±1.0%	±1.0%	±1.0%	±1.0%	±1.0%	±1.0%	±1.0%	±1.0%
SETUP, RISE TIME	1000ms, 30ms/230VAC 1500ms, 30ms/115VAC at full load
HOLD UP TIME (Typ.)	16ms@140W load, 8ms@200W load
VOLTAGE RANGE Note.4	80~264VAC 113~370VDC
FREQUENCY RANGE	47~63Hz
POWER FACTOR	PF>0.95/230VAC PF>0.98/115VAC at full load
EFFICIENCY (Typ.)	93%	93%	93.5%	94%	94%	94%	94%	94%
AC CURRENT (Typ.)	2.5A/115VAC 1A/230VAC
INRUSH CURRENT (Typ.)	COLD START 40A/115VAC 80A/230VAC
LEAKAGE CURRENT	Earth leakage current < 500μA(rms) @ 264VAC, touch current < 70μA(rms) @ 264VAC
OVERLOAD	105 ~ 150% rated output power, Protection type : Hiccup after 3 sec, recovers automatically(3 sec) after fault condition is removed
OVER VOLTAGE	13.2~15.6V	16.5~19.5V	19.8~23.4V	26.4~31.2V	29.7~35.1V	39.6~46.8V	52.8~62.4V	59.4~67.5V
OVER TEMPERATURE	Protection type: Shut down o/p voltage, re-power on to recover
FUNCTION EXTERNAL FAN SUPPLY	Protection type: Shut down o/p voltage, recovers automatically after temperature goes down or re-power on to recover 12V@0.5A for driving a fan / 12V@0.1A without fan; (10.98CFM)
WORKING TEMP.	tolerance -20% ~ +15% at main output 20% rated current (-40~+80°C (Refer to "Derating Curve"))
WORKING HUMIDITY	20~90% RH non-condensing
STORAGE TEMP., HUMIDITY	-40 ~ +85°C, 10 ~ 95% RH non-condensing
TEMP. COEFFICIENT	±0.03%/°C (0 ~ 50°C)
VIBRATION	10~500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes

Safety & EMC

SAFETY STANDARDS	Certifications
	CB	TUV	UL	CCC	RCM	EAC
	IEC62368-1, IEC60335-1, IEC61558-1/-2-16, IEC60601-1;	BS EN/EN62368-1, BS EN/EN60335-1, BS EN/EN61558-1/-2-16, BS EN/EN60601-1(3.2 Version);	UL62368-1, ANSI / AAMI ES60601-1(3.2 Version);	GB4943.1;	AS/NZS 61558-1/-2-16;	TPTC 004 approved.
ISOLATION RESISTANCE	Primary-Secondary: 2xMOPP, Primary-Earth:1xMOPP, Secondary-Earth:1xMOPP
OVER VOLTAGE CATEGORY	IEC/EN 61558-1/-2-16(OVC III, altitude up to 2000M) IEC/EN/UL 62368-1 (OVCⅡ, altitude up to 5000M) IEC/EN 60335-1 (OVCII, altitude up to 5000M) IEC/EN 60601-1 (OVC II, altitude up to 4000M)
PROTECTIVE EXTRA-LOW VOLTAGE	IEC/EN61558-2-16 (SELV) IEC/EN/UL 62368-1 (SELV / ES1)
WITHSTAND VOLTAGE	I/P-O/P:4KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC
ISOLATION RESISTANCE	I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25°C/70% RH
EMC EMISSION (Note 5)	Parameter	Standard	Test Level / Note
	Conducted & Radiated	BS EN/EN55032(CISPR32) BS EN/EN55011(CISPR11) BS EN/EN55014(CISPR32)	Class I: Class B, Class II: Class A
	Harmonic Current	BS EN/EN61000-3-2	Class A
	Voltage Flicker	BS EN/EN61000-3-3	Class A
	EMC IMMUNITY	Parameter	Standard	Test Level /Note
		ESD	BS EN/EN61000-4-2	Level 4, 15KV air; Level 4, 8KV contact
RF field susceptibility		BS EN/EN61000-4-3
EFT bursts		BS EN/EN61000-4-4	Level 3, 2KV
	Surge susceptibility	BS EN/EN61000-4-5
	Conducted susceptibility	BS EN/EN61000-4-6	Level 3, 10V
	Magnetic field immunity	BS EN/EN61000-4-8
	Voltage Dips and interruptions	BS EN/EN61000-4-11	>95% dip 0. 5 periods, 100% dip 1 periods, 30% dip 25 periods, >95% interruptions 250 periods
MTBF	2928.9K hrs min. Telcordia SR-332 (Bellcore); 393.9K hrs min. MIL-HDBK-217F (25°C)
DIMENSION	101.650.8 25.4mm (LWH)
PACKING	0.21Kg; 36pcs/10Kg/0.95CUFT

Note:

All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.
Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1μf & 47µf parallel capacitor.
Tolerance: includes set up tolerance, line regulation and load regulation.
Derating may be needed under low input voltages. Please check the derating curve for more details.
The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to "EMI testing of component power supplies." (as available on http://www.meanwell.com)

※Product Liability Disclaimer: For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx

Block Diagram

A block diagram illustrates the internal components and signal flow of the power supply, including EMI filters, rectifiers, switching circuits, detection circuits, and output stages.

Derating Curve

The derating curve shows the maximum output power (in Watts) versus ambient temperature (°C). It indicates that the power supply can deliver up to 200W with forced-cooled (10.98CFM fan) operation, and up to 140W with free air convection. Derating is necessary at higher ambient temperatures.

Cooling Methods:

Free air convection: 140W Max. Output Power
Force-cooled with external Fan: 200W Max. Output Power

Output Derating VS Input Voltage

This graph illustrates how the output power capacity of the LOP-200 series power supply is affected by the input voltage. It shows that the power supply can operate at full capacity (100% load) within an input voltage range of approximately 115VAC to 264VAC.

Mechanical Specification

The mechanical specifications provide the physical dimensions and mounting details of the LOP-200 power supply. The unit measures 101.6mm in length, 50.8mm in width, and 25.4mm in height. It includes details on AC input and DC output connectors, as well as a fan connector.

Note on System Grounding:

Class I System: Mounting holes marked with [ground symbol] have to be connected to safety earth.
Class II System: Unnecessary to connect with safety earth.

Installation Manual

For detailed installation instructions, please refer to the MEAN WELL website: http://www.meanwell.com/webnet/search/InstallationSearch.html

Models: LOP-200-12, LOP-200-15, LOP-200-18, LOP-200-24, LOP-200-27, LOP-200-36, LOP-200-48, LOP-200-54, LOP-200 Series 200W 4 2 Inch Low Profile Open Frame Power Supply, LOP-200 Series, 200W 4 2 Inch Low Profile Open Frame Power Supply, Low Profile Open Frame Power Supply, Frame Power Supply, Power Supply, Supply

File Info : application/pdf, 5 Pages, 753.28KB

lop-200-20231122

References

Related Documents

	MEAN WELL LOP-200 Series: 200W Low Profile Open Frame Power Supply Comprehensive technical specifications and features for the MEAN WELL LOP-200 series of 200W, 4"x2" low profile open frame power supplies. Details include electrical specifications, safety and EMC compliance, mechanical dimensions, and application suitability for industrial, medical, and consumer electronics.
	MEAN WELL LOP-400 Series 400W Low Profile Open Frame Power Supply Detailed technical specifications, features, and compliance information for the MEAN WELL LOP-400 series 400W low profile open frame power supply, suitable for industrial, automation, and medical applications.
	MEAN WELL LOP-600 Series: 600W 5x3 Inch Low Profile Open Frame Power Supply Explore the MEAN WELL LOP-600 series, a 600W, 5x3 inch low-profile open-frame power supply. Featuring high efficiency, wide operating temperature range, and global safety certifications, it is ideal for industrial automation, medical devices, and electronic equipment. Learn about its specifications, applications, and technical details.
	MEAN WELL LRS-200 Series 200W Single Output Switching Power Supply Specifications Comprehensive technical specifications for the MEAN WELL LRS-200 series 200W single output switching power supplies. Details include electrical characteristics, features, applications, environmental specifications, safety compliance, and mechanical dimensions for models ranging from 3.3V to 48V.
	MEAN WELL UHP-200 Series 200W Slim Type PFC Switching Power Supply Comprehensive technical specifications, features, applications, and installation guidelines for the MEAN WELL UHP-200 series 200W slim type, fanless switching power supply with active PFC, suitable for various industrial applications.
	MEAN WELL LRS-200 Series 200W Single Output Switching Power Supply Datasheet Comprehensive technical datasheet for the MEAN WELL LRS-200 series of 200W single-output enclosed switching power supplies. This document details features, applications, electrical specifications, environmental conditions, safety compliance, block diagrams, derating curves, static characteristics, and mechanical dimensions for models LRS-200-3.3 through LRS-200-48.
	MEAN WELL LRS-200 Series 200W Single Output Switching Power Supply Detailed specifications and features for the MEAN WELL LRS-200 series, a 200W single-output enclosed switching power supply. Covers applications in industrial automation, control systems, and electronic equipment, with features like wide input range, high efficiency, low no-load power consumption, and robust protection.
	MEAN WELL LRS-200 Series 200W Single Output Switching Power Supply Specifications Detailed specifications for the MEAN WELL LRS-200 series of 200W single-output enclosed switching power supplies. Features include wide AC input range, high efficiency, low no-load power consumption, and compliance with international safety standards. Ideal for industrial automation, control systems, and electronic equipment.