JLab Rewind Wireless Headphones

Your Warranty

All warranty claims are subject to JLab Audio's approval and sole discretion. Keep your proof of purchase for the product to ensure warranty benefits.

[2-Year Limited Warranty] [US-Based Customer Support]

Contact Us

Reach us via email at support@jlabaudio.com or visit our website intl.jlabaudio.com/contact for more information.

Register Today

Visit intl.jlabaudio.com/register for usage tips, product updates, FAQs, and more.

First-time Bluetooth Pairing

1. Step 1: Enable Bluetooth

   Turn on Bluetooth from your device's settings.

2. Step 2: Enter Pairing Mode

   Press and hold the [Power Button] for 10 seconds. Release the button. The indicator light will flash red and blue near the foam earpad, indicating it has entered pairing mode.

   [Diagram: Shows phone with Bluetooth settings and headphones in pairing mode]

3. Step 3: Connect to Device

   Select 'JLab Rewind' in your device's settings for connection. The indicator will slowly flash blue when pairing is complete via Bluetooth.

   [Diagram: Shows phone connected to JLab Rewind headphones]

Pairing Additional Devices

Turn off Bluetooth on devices you have previously paired, and turn it on for the new device. Repeat the first-time setup steps for new devices.

Notes:

• Bluetooth is a wireless radio wave connection technology, meaning the connection between the headphones and the device is sensitive to objects between them. The headphones are designed for use within a 33-foot (10-meter) range from the connected device, without significant obstructions like walls.
• Once connected successfully, the headphones will register this device and automatically pair with it when turned on in the future. The headset can only connect to one device at a time. To connect a different device, you must first unpair the current one from Bluetooth settings.
• If the Bluetooth connection is interrupted for any reason, you can reconnect manually.

Audio Notifications

• Power On: Chime
• Bluetooth Connection: Two chimes
• Low Battery: "Battery low" (less than 20%)
• Power Off: Chime

Charging

Note: The headphones cannot be used while charging. Charge the headphones for 3 hours for a full charge.

Connect the Rewind headphones to a computer or USB output device with a 5V voltage, using the included charging cable.

The red light indicates charging is in progress ([Charging Indicator]), while the blue light indicates charging is complete ([Charged Indicator]).

[Diagram: Shows USB cable connecting headphones to a power source, with indicator lights]

Button Functions

• Bluetooth Pairing: Follow first-time setup steps.
• Power On/Off: Press and hold the [Power Button] for 2 seconds.
• Play/Pause/Answer Call/End Call: Single tap the [Play/Pause] button.
• Next Audio Track: Press and hold the [Play/Pause] button for 2 seconds.
• Use Voice Assistant (Google Assistant/Siri): Double tap the [Play/Pause] button.

Audio Modes

Cycle through the three audio mode settings by tapping the [JLab Audio Logo] button.

• Signature Sound: Balanced sound.
• JLab C3™ Signature Sound: Regular sound without any other audio enhancements.
• Bass Boost: Amplified bass sound.

[Diagram: Shows icons representing different audio modes and their descriptions]

Important Notes & Care

• Avoid exposing the headphones to any moisture or liquids.
• Avoid exposing the headphones to extreme heat, cold, or humidity.
• Avoid dropping or crushing the headphones, or excessively straining or bending the wire at sharp angles.
• Earwax may accumulate on the headphones, leading to reduced sound quality. Carefully remove earwax using a cotton swab or other fine tools to improve sound quality.
• If you experience any discomfort, try lowering the volume or taking a break from using the headphones.
• If discomfort persists while using this product, discontinue use and consult a medical professional.
• We recommend treating your headphones with the same care as your eyewear; keep them in a safe place when not in use.