ZEALOT-S89 Wireless Speaker Quick Start Guide
Packing Content
- ZEALOT-S89 Wireless Speaker
- USB-C Cable
- Quick Start Guide
Technical Specifications
| Feature | Specification |
|---|---|
| Wireless Version | 5.3 |
| Charging Voltage | DC 5V |
| Working Voltage | 11.1V |
| Transmission Distance | 10m |
| Frequency Range | 20Hz-20KHz |
| Speaker | 189*130mm + Φ93mm*2pcs + Φ42mm*2pcs |
| SNR | ⤐90dB |
| Distortion | <1% |
| Weight | 8.4kg |
| Size | 538×241×266mm |
Getting Started
Power On/Off
Press the [power] button to power the device on or off.
Charging
Connect the USB-C cable ? to the speaker's charging port and a power source. The battery indicator light shows the charging status.
Battery Indicator Light
- 80%-100%: Green light is on
- 40%-70%: Yellow light is on
- ≤ 30%: Red light is on
Wireless Connection
Ensure your device's Bluetooth is enabled. The speaker supports wireless version 5.3.
To connect, turn on the speaker and select "ZEALOT-S89" from your device's Bluetooth list.
Party Add (Dual Pairing)
To connect two speakers for stereo sound:
- Turn on the first speaker and connect it to your device. Click the dual pairing button [pair].
- Turn on the second speaker, click its dual pairing button [pair]. A prompt tone will indicate successful connection between the two speakers.
Playback Control
Use the playback controls on the speaker to play/pause music, adjust volume, and skip tracks.
Light Modes
Control the speaker's lighting effects:
- Light ON/OFF: Toggle the light effects on or off.
- Light Switch: Cycle through different light modes.
Light Mode Descriptions:
- Bass: Green light is on
- Vocal: Orange light is on
- Normal: (No specific color mentioned for Normal)
Warnings and Precautions
To ensure correct use and trouble-free operation, please read this user manual carefully first.
For the first use, it is recommended to fully charge it.
Please use and store the product at room temperature.
Do not expose the product to fire, high temperature, direct sunlight, etc.
Please keep the speaker volume moderate to avoid temporary or permanent hearing impairment.
Do not use organic solvents or other chemicals to clean the product.
Do not let small particles enter the product.
Do not disassemble the product or make any modifications to the product structure or any part thereof.
If the battery is not replaced correctly, there will be an explosion accident; only the same battery type can be replaced.
The battery (battery pack) must not be exposed to sunlight, fire, or similar overheating conditions.
Do not throw and drop the product to avoid damage.
Compliance Information
FCC Warning
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Power Adapter Recommendation
If consumers use a power adapter to charge, they should purchase a matching set with CCC certification and meet the required standards.
Hazardous Substances Information
Table shows the content of toxic or hazardous substances in components:
| Component | Pb (Lead) | Hg (Mercury) | Cd (Cadmium) | Cr (Hexavalent Chromium) | PBB | PBDE |
|---|---|---|---|---|---|---|
| Printed Circuit Boards | o | o | o | o | o | o |
| Plastic and Polymer Parts | o | o | o | o | o | o |
| Standard Battery | X | o | o | o | o | o |
| User Manual | o | o | o | o | o | o |
Notes:
- "o" indicates that the content of the hazardous substance in all homogeneous materials of the component is below the limit requirement specified in SJ/T 11363-2006.
- "X" indicates that the content of the hazardous substance in at least one homogeneous material of the component exceeds the limit requirement specified in SJ/T 11363-2008.
- The components marked with "X" comply with RS Regulation - European Union Parliament Directive 2002/95/EC on the restriction of hazardous substances in electrical and electronic equipment.
The period during which the toxic or hazardous substances or elements contained in this electronic information product will not leak, cause pollution to the environment, or cause serious damage to human body or property, when used under the conditions described in the manual, is 10 years.
