ZEALOT-S89 Wireless Speaker
Quick Start Guide
Material: 80g writing paper, Finished product size: 75*75mm, Folding: Accordion fold 8 pages 7 folds, then double fold.
Packing Content
The package includes the ZEALOT-S89 Wireless Speaker, a USB-C charging cable, and a user manual.
Power On
Press the power button ? to turn on the speaker. The battery indicator light shows the remaining charge:
- 80%-100%: Green light is on ?
- 40%-70%: Yellow light is on ?
- ≤30%: Red light is on ?
Charge
Connect the speaker to a power source using the provided USB-C cable ? to charge the battery. ?
Wireless Connection
To connect your device: ?
- Turn on one speaker. Connect it to your device (e.g., smartphone). The indicator light will flash during pairing and become steady when connected.
- To pair a second speaker for stereo sound (PartyAdd): Turn on the second speaker and click its dual pairing button. A prompt tone will indicate successful connection between both speakers.
Long press the wireless button to disconnect the current connection.
Mode Switch
Switch between different input modes (WIRELESS, TF, USB, AUX) by pressing the 'M' button (x1). ?️
Play Controls
Control playback using the speaker buttons: Volume Up/Down, Play/Pause, Next/Previous Track. ▶️
PartyAdd (Dual Pairing)
To enable dual pairing for stereo sound:
- Turn on the first speaker and connect it to your device. Click the dual pairing button.
- Turn on the second speaker and click its dual pairing button. A prompt tone will confirm that both speakers have successfully connected.
Equalizer (EQ) Settings
Select EQ modes by pressing the EQ button (x1): ?
- Bass mode (indicated by a Green light)
- Vocal mode (indicated by an Orange light)
- Normal mode (no specific light color)
Important Warnings
❌ To ensure correct use and trouble-free operation, please read this user manual carefully first.
- For the first use, it is recommended to fully charge the product.
- Please use and store the product at room temperature.
- Do not expose the product to fire, high temperature, direct sunlight, etc.
- Please keep the speaker volume moderate to avoid temporary or permanent hearing impairment.
- Do not use organic solvents or other chemicals to clean the product.
- Do not let small particles enter the product.
- Do not disassemble the product or make any modifications to the product structure or any part thereof.
- If the battery is not replaced correctly, there will be an explosion accident; only the same battery type can be replaced.
- The battery (battery pack) must not be exposed to such sunlight, fire, or similar overheating conditions.
- Do not throw and drop the product to avoid damage.
Technical Specifications
| Feature | Value |
|---|---|
| Wireless version | 5.3 |
| Charging voltage | DC 5V |
| Working voltage | 11.1V |
| Transmission distance | 10m |
| Frequency range | 20Hz-20KHz |
| Speaker | 189*130mm + 93mm*2pcs + 42mm*2pcs |
| SNR | 90dB |
| Distortion | <1% |
| Weight | 8.4kg |
| Size | 538*241*266mm |
Hazardous Substances Information
This product contains substances that comply with Chinese RoHS standards (SJ/T 11363-2006 and SJ/T 11363-2008) and EU RoHS directives (2002/95/EC).
| Component | Pb | Hg | Cd | Cr6+ | PBB | PBDE |
|---|---|---|---|---|---|---|
| Printed Circuit Board | ○ | ○ | ○ | ○ | ○ | ○ |
| Plastic Parts | ○ | ○ | ○ | ○ | ○ | ○ |
| Enclosure | ○ | ○ | ○ | ○ | ○ | ○ |
| Standard Voltage Components | ○ | ○ | ○ | ○ | ○ | ○ |
○: Indicates that the concentration of the hazardous substance in all homogeneous materials of the component is below the limit requirement of GB/T 26572-2011.
X: Indicates that the concentration of the hazardous substance in at least one homogeneous material of the component is above the limit requirement of GB/T 26572-2011.
Note: The table refers to the Chinese standard GB 26572-2011 and EU directive 2011/65/EU.
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
[CE Mark] [RoHS Compliant] [FCC Mark] [CQC Mark]
Model: ZA-S89-20250223
