ZEALOT-S67 Wireless Speaker Quick Start Guide

Introduction

Welcome to the ZEALOT-S67 Wireless Speaker. This guide provides essential information for setting up and using your new speaker.

Packing Content

• ZEALOT-S67 Wireless Speaker (x1)

Getting Started

Powering On/Off

To turn the speaker on or off, press the power button.

Mode Switching

Press the mode switch button to cycle through available modes.

Wireless Connection

Connect your device to the ZEALOT-S67 wirelessly via Bluetooth.

Pairing Process:

• Turn on the speaker.
• On your device (e.g., smartphone), enable Bluetooth and search for available devices.
• Select "ZEALOT-S67" from the list to connect.

Indicator Lights:

• Flashing: The speaker is in pairing mode or searching for a connection.
• Solid Light: The speaker is successfully connected to a device.

Party Add (TWS Pairing)

Connect two ZEALOT-S67 speakers for an enhanced stereo experience.

Steps:

1. Ensure both speakers are turned on and within 1 meter (approx. 3 feet) of each other.
2. On your phone, turn on Bluetooth and disconnect from any previously paired "ZEALOT-S67" if necessary.
3. On one of the speakers, press the designated button. A prompt tone will sound, indicating successful pairing initiation. A second prompt tone confirms successful connection between the two speakers.
4. Turn on Bluetooth on your phone again and connect to "ZEALOT-S67".
5. Play music to test if both speakers are playing simultaneously.

Playback and Calls

• Play/Pause: Press the play/pause button.
• Next Track: Press the next track button.
• Previous Track: Press the previous track button.
• Call Handling: Press the call button to answer or end a call.

Equalizer Modes

Select your preferred sound profile:

• Vocal: Enhances vocal clarity.
• Bass: Boosts low frequencies for a richer bass sound.
• Normal: Provides a balanced audio output.

Charging

Connect the included USB-C cable to the speaker's USB-C port and a compatible power adapter to charge the device.

Power Adapter Requirement: For optimal charging speed, use a power adapter that provides between 7.5 Watts (minimum) and 15 Watts (maximum).

Technical Specifications

Warnings and Precautions

Please read the following safety information carefully before using the product:

• For correct and trouble-free operation, read this user manual thoroughly.
• Fully charge the speaker before the first use.
• Use and store the product at room temperature.
• Do not expose the product to fire, high temperatures, or direct sunlight.
• Maintain a moderate speaker volume to prevent temporary or permanent hearing impairment.
• Do not use organic solvents or other chemicals for cleaning.
• Keep small particles away from the product.
• Do not disassemble or modify the product's structure or any part of it.
• Incorrect battery replacement can lead to an explosion; only use the same battery type.
• The battery must not be exposed to sunlight, fire, or similar overheating conditions.
• Do not throw or drop the product to avoid damage.

Compliance Information

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna; increase the separation between the equipment and receiver; connect the equipment into an outlet on a circuit different from that to which the receiver is connected; or consult the dealer or an experienced radio/TV technician for help.

Radiation Exposure Statement: The device has been evaluated to meet general RF exposure requirements and can be used in portable exposure conditions without restriction.

Industry Canada Compliance

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.

RoHS Compliance

The table below indicates the presence of hazardous substances in the product's components, in accordance with Chinese regulations (SJ/T 11363-2006 and SJ/T 11364-2006). The "o" symbol indicates that the content of the hazardous substance in all homogeneous materials of the part is below the limit specified in standard SJ/T 11363-2006. The "X" symbol indicates that the hazardous substance content in at least one homogeneous material of the part exceeds the limit specified in standard SJ/T 11364-2006. Parts marked with "X" comply with EU Directive 2002/95/EC (RoHS).

The period during which the toxic or harmful substances or elements contained in this electronic information product will not leak out, under the conditions of use described in the user manual, is 10 years.

Multi-language Manual Access

A QR code is provided to access the user manual in multiple languages. Scan the QR code with your device to download the full manual.