Operation Manual

Introduction

Thank you for purchasing this quality product. To minimise the risk of injury, we urge that our clients take some basic safety precautions when using this device. Please read the operation instructions carefully and make sure you have understood its content.

Keep these operation instructions safe.

Security Precautions

• Before charging the rack, make sure that it is securely mounted and not damaged.
• Consider the roof load capacity and the permissible total weight of your vehicle. The permissible total weight must not be exceeded.
• The maximum load capacity of the rack is 70 kg. This capacity must not be exceeded.
• Follow the legal stipulations of the road traffic regulations during transport. For example, the total width of the vehicle with its load must not exceed 2.55 m, and its total height must not exceed 4 m.
• Make sure that the load is correctly secured with fastening straps and tension belts.
• Regularly control the load and the fastening.
• Adapt your driving style to the additional load.

Scope of Delivery

The delivery includes the following components:

• Main rack carriers: 4
• U-shaped brackets: 8
• Fasteners (bolts/nuts): 8
• Securing straps: 16
• Brackets: 8
• Fasteners (bolts/nuts): 8
• Securing straps: 16
• Fasteners (bolts/nuts): 8

(Note: The exact configuration of fasteners and straps may vary slightly depending on the specific model.)

Mounting Instructions

For Square Bars

1st step

Prepare the components: 4 main rack carriers, 8 U-shaped brackets, 8 fasteners, and 16 securing straps are used in this step.

2nd step

Attach the main rack carrier to the square roof bar using the U-shaped brackets and fasteners. Ensure a snug fit.

3rd step

Secure the carrier to the roof bar. This typically involves tightening the fasteners and potentially using a locking mechanism for added security.

For Oval Bars

1st step

Prepare the components: 4 main rack carriers, 4 oval brackets, and 4 fasteners are used in this step.

2nd step

Position the main rack carrier onto the oval roof bar and align the mounting holes.

3rd step

Secure the carrier to the roof bar by inserting and tightening the fasteners through the brackets and the carrier.

Contact and Support

For any inquiries, suggestions for improvement, or to report irregularities, please contact WilTec Wildanger Technik GmbH.

Send an e-mail to: service@wiltec.info

Alternatively, use our contact form: https://www.wiltec.de/contacts/

The most recent version of this manual in various languages can be found in our online shop via: https://www.wiltec.de/docsearch

Our postal address is:

WilTec Wildanger Technik GmbH
Königsbenden 12
52249 Eschweiler
Germany

To return orders for exchange, repair, or other purposes, please use the following address. Attention! To allow for a smooth execution of your complaint or return, it is important to contact our customer service team before returning the goods.

Returns Department:
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler

E-mail: service@wiltec.info

Tel: +49 2403 55592-0

Fax: +49 2403 55592-15