Toboli Air Walker/Crosstrainer

Model: 62712

Manufacturer: WilTec Wildanger Technik GmbH

Introduction

Thank you for purchasing this quality product. To minimise the risk of injury, please take some basic safety precautions when using this device. Read the operation instructions carefully and ensure you have understood their content. Keep these operation instructions safe.

The air walker is a versatile, low-impact, and easy-to-use piece of exercise equipment that works the lower half and middle of the body. The use of the moving handles also provides a full-body workout, engaging more muscles and burning more calories.

Safety Instructions

Please read these instructions carefully before starting assembly. It is important to keep these instructions for future reference.

Mount and operate the unit on a level surface.
Make sure the unit is stable before use.
Always ensure the unit has sufficient space (at least 0.6 m) on each side for an emergency dismount.
The safety of the unit can only be maintained if it is regularly inspected for wear.
Replace damaged components immediately and take the unit out of service until repaired.
Only use the adjustments described in the instructions. Always use the correct adjustment pin/fixing.
Always check that the pins/fixings are tight and secure before use and after adjustment.
Never allow adjustment devices to protrude from the device.
Always consult your doctor before undertaking any exercise programme.
Always wear appropriate clothing and footwear, e.g., tracksuit, shorts, and training shoes.
Take off all jewellery before exercising.
Keep your back straight during exercise, especially during prolonged exercise.
Warm up sufficiently before using the machine to reduce strain on the muscles.
Never overload the machine. The maximum user weight is 110 kg.
Never use the machine in any way other than that described in these instructions.
If you feel weakened, stop exercising immediately.
Incorrect form/technique or excessive training can cause damage to your health.
Children should not be on or near the machine, especially when it is not in use and unattended.
This appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use by a person responsible for their safety.
This product is not suitable for therapeutic purposes.
This product is intended for home use only.
Caution! Follow the instructions carefully when assembling, using, and maintaining the appliance.

Assembly

It is important to assemble the product in a clean and tidy room.
It is recommended to have someone help with assembly, as some components are heavy.
Take all parts out of the box and place them on the floor.

Step 1: Prepare A-frame

Fold out the legs of the A-frame and screw in the support bolts (part 9).

Diagram: Visual guide showing how to fold out the A-frame legs and screw in the support bolts (part 9).

Step 2: Secure Feet

Secure the feet with the screws, washers, and nuts (part 5), ensuring the wheels of the rear feet face outwards.

Diagram: Visual guide showing how to secure the feet using screws, washers, and nuts (part 5), ensuring the rear wheels face outwards.

Step 3: Insert Pins

While the legs are vertical, push the pin in completely and lower the treads. If the pin does not push in, do not use force; move the leg slightly to release the pin and try again.

Diagram: Visual guide showing how to insert the pin into the vertical legs and lower the treads. Includes a magnified view of the pin insertion point.

Step 4: Attach Shock Absorbers

Raise the legs and insert the soft shock absorbers (part 8) on both sides.

Diagram: Visual guide showing how to raise the legs and insert the soft shock absorbers (part 8) on both sides.

Step 5: Attach Phone/Tablet Holder

Secure the mobile phone/tablet holder (part 13) with screws (part 14).

Diagram: Visual guide showing how to attach the mobile phone/tablet holder (part 13) using screws (part 14).

Step 6: Attach Fixed Handles

Attach the fixed handles (part 2). Use screws (part 6) and washers (part 7) for this.

Diagram: Visual guide showing how to attach the fixed handles (part 2) using screws (part 6) and washers (part 7).

Step 7: Connect Tracker Wires

Attach the wires to the progress tracker (part 12) before plugging in the heart rate monitor cable and sliding the tracker on.

Diagram: Visual guide showing how to connect the wires to the progress tracker (part 12) before attaching the heart rate monitor cable and sliding the tracker onto its mount.

Step 8: Attach Movable Handles

Attach the movable handles (part 3), ensuring the bends face outwards. Use screws (part 6) and washers (part 7).

Diagram: Visual guide showing how to attach the movable handles (part 3), ensuring their bends face outwards, using screws (part 6) and washers (part 7).

Step 9: Set Resistance and Begin

Set your resistance levels and begin exercising.

Diagram: Visual guide showing the completed Air Walker/Crosstrainer ready for use, with a magnified view of the resistance adjustment mechanism on the pedals.

Using the Air Walker/Crosstrainer

Set your resistance level from 0 to 4 on each of the 4 legs.
To ensure an even workout, make sure all 4 plugs are at the same level.
The higher the level, the greater the resistance and the harder the workout. Climb onto the machine and hold on to the firm handles.
We wish you a successful workout with lots of exercises.

Images: Demonstrating the process of setting the resistance level on the Air Walker/Crosstrainer. The instructions indicate setting the level from 0 to 4 on each of the four legs, ensuring all plugs are at the same level for an even workout.

Care and Maintenance

This unit should not be placed outdoors, in a garage, or outbuilding. Store the unit in a dry place with minimal temperature fluctuation.
Keep the product clean with a warm, damp cloth.
Do not clean electrical components when wet. Unplug the appliance from the mains before any care or maintenance.
The safety of the unit can only be maintained if it is regularly inspected for damage and wear. This includes all ropes, pulleys, nuts, screws, moving parts, bushes, chains, wheels, bearings, and connecting parts.
Check the product regularly (weekly is recommended).
Ensure all fasteners are tight before use.
Always replace damaged or worn components with original parts.

Parts List

No.	Name	Qty.
1	A-frame	1
2	Fixed handles	1
3	Movable handles	2
4a	Front stand	1
4b	Rear stand	1
5	Bolt (M10×60), washer and nut	4
6	Screw (M8×40)	6
7	Washer (M8×40)	6
8	Soft shock absorber	2
9	Support bolt	1
10	Allen key	1
11	Spanner	1
12	Progress tracker	1
13	Phone/tablet holder	1
14	Screws	2

Contact & Legal Information

For questions or suggestions for improvement, please contact WilTec Wildanger Technik GmbH:

Email: service@wiltec.info
Contact Form: wiltec.de/contacts/
Find the latest manual versions at: wiltec.de/docsearch

Postal Address:

WilTec Wildanger Technik GmbH
Königsbenden 12
52249 Eschweiler
Germany

For returns (exchange, repair): Please contact customer service before returning goods.

Returns Department:
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler

Email: service@wiltec.info

Tel: +49 2403 55592-0

Fax: +49 2403 55592-15

This document is protected by copyright. Reproduction or commercial use requires written permission from WilTec Wildanger Technik GmbH.

	Toboli Foldable SUP/Surfboard Trolley 45 kg - Operation Manual & Guide Official operation manual for the Toboli Foldable SUP/Surfboard Trolley (models 62889, 63040). Learn how to assemble, use, and safely operate this 45 kg capacity trolley for your water sports gear.
	Declaration of Performance for Toboli Folding Arm Awning This document is a Declaration of Performance for the Toboli Folding Arm Awning, detailing its compliance with EU directives and harmonized standards.
	Toboli 52423 Children's Chair/Learning Tower Assembly Instructions Step-by-step assembly guide for the Toboli 52423 Children's Chair/Learning Tower, designed to promote motor skills and independence. Includes detailed diagrams and part lists.
	Toboli Radiator Cover 64263 Assembly Instructions Step-by-step assembly instructions for the Toboli radiator cover, model 64263, measuring 172x19x82 cm. Includes safety precautions and a parts list.
	Toboli Foldable Handcart 60274 Operation Manual Official operation manual for the Toboli Foldable Handcart (Model 60274). Includes instructions for unfolding, technical specifications, and safety precautions. Learn how to use and maintain your Toboli handcart.
	Toboli Bicycle Trailer 61971 Operation Manual and Safety Guide Comprehensive operation manual and safety guide for the Toboli 61971 bicycle trailer, covering setup, loading, safety precautions, and legal requirements for use.
	Toboli Fruit Press User Manual and Specifications Comprehensive user manual for the Toboli Fruit Press, including assembly instructions, parts list, quantities, and technical specifications for models 30162, 30163, 30164, and 51739.
	Toboli Roof Rack for Kayaks - Operation Manual & Mounting Guide Comprehensive operation manual and mounting guide for the Toboli Roof Rack for Kayaks (Item 61814). Learn about safety precautions, scope of delivery, and step-by-step installation for both square and oval roof bars. Includes contact information for WilTec Wildanger Technik GmbH.