Toboli Pavilion Assembly Instructions
Model Numbers: 63365, 63366
Dimensions: 3 x 6 meters
Parts List
No. | Figure | Qty. | Figure | Qty. |
---|---|---|---|---|
1 | [Tube Connector] |
20 | [Corner Connector] |
4 |
2 | [Short Tube] |
4 | [Angled Connector] |
2 |
4 | [Medium Tube] |
7 | [T-Connector] |
2 |
5 | [Long Tube] |
6 | [Roof Connector] |
1 |
6 | [Leg with Holes] |
6 | [Top Connector] |
6 |
8 | [Ground Stake] |
2 | [Wheel] |
12 |
Assembly Steps
Step 1
Assemble the base frame by connecting the tubes and connectors as shown in the diagram. Ensure all connections are secure.
Diagram Description: Shows the initial assembly of the pavilion frame, connecting vertical poles with horizontal and diagonal support tubes.
Step 2
Continue assembling the roof structure by adding more tubes and connectors. Refer to the diagram for the correct placement of each part.
Diagram Description: Depicts the assembly of the roof framework, showing the connection of roof beams and supports.
Step 3
Attach the roof cover to the assembled frame. Ensure the cover is spread evenly and secured to the frame.
Diagram Description: Illustrates the pavilion with the roof cover partially attached, showing how it drapes over the frame.
Step 4
Secure the pavilion to the ground using the provided stakes. Attach guy ropes to the frame and stake them into the ground for stability.
Diagram Description: Shows the fully assembled pavilion with guy ropes attached to the frame and secured to the ground with stakes.
Step 5
Attach any side panels or walls if applicable. The diagram shows side panels with windows being attached to the frame.
Diagram Description: Illustrates the pavilion with side panels, including those with window-like structures, attached to the frame.
Important Notice
Reprinting this manual, in whole or in part, as well as any commercial use, including the use of some of its parts, is only permitted with written authorization from WilTec Wildanger Technik GmbH.