Toboli Assembly Instructions
63365, 63366 – Pavilion 3 × 6 m
Parts List
| No. | Figure | Qty. | Figure | Qty. |
|---|---|---|---|---|
| 1 | [Straight tube] | 20 | [Corner connector] | 4 |
| 2 | [Short tube] | 4 | [T-connector] | 2 |
| 4 | [Angled tube] | 7 | [Roof connector] | 2 |
| 5 | [Leg tube] | 6 | [Roof support] | 1 |
| 6 | [Leg base] | 6 | [Roof peak connector] | 6 |
| 8 | [Guy rope anchor] | 2 | [Rolled fabric/cover] | 12 |
Assembly Steps
-
Step 1
Assemble the base frame and upright poles. The diagram shows the initial connection of horizontal and vertical tubes, forming the basic structure of the pavilion.
-
Step 2
Connect the roof support poles to the uprights and to each other, creating the hexagonal roof structure. This step involves attaching angled and straight tubes to form the roof's framework.
-
Step 3
Drape the fabric cover over the assembled frame. The image shows the fabric being placed onto the roof structure, with sides beginning to hang down.
-
Step 4
Secure the pavilion by anchoring the legs to the ground using guy ropes. The diagram illustrates the pavilion with guy ropes extending from the top corners and sides to ground stakes.
-
Step 5
Attach the side walls or curtains. The illustration shows the pavilion with side panels attached, featuring window-like openings.
Important Note
Reproduction and any commercial use (of parts) of this operating manual requires written permission from WilTec Wildanger Technik GmbH.
For more information, visit http://www.toboli.com.
teich-tipp.de
