Green Lion Force Pro Cordless Vacuum Cleaner

Product Component Name

The main components of the Green Lion Force Pro Cordless Vacuum Cleaner are:

• 1. Shift button
• 2. Display screen
• 3. Dust-scraping push rod handle
• 4. Air outlet
• 5. Dust cup
• 6. Dust cup release button
• 7. Conductive telescopic tube
• 8. Floor brush release button
• 9. Switch button
• 10. Wall mount bracket
• 11. Charging cable
• 12. Wall mount screw
• 13. Main unit
• 14. Telescopic tube
• 15. Electric floor brush

Specifications

Important Notice

Before using this device, please read this user manual carefully and save it for future reference.

• Charge the device before use.
• Check whether the voltage on the charger corresponds to the local power supply voltage before connection.
• Do not use the device if the plug, power cord, or the appliance itself is damaged.
• If the power supply of this electrical appliance is damaged, replace it immediately to avoid danger.
• Keep electrical appliances out of the reach of children.
• Never absorb water or any other liquid.
• Do not inhale flammable substances.
• Do not inhale blades or other sharp objects.
• Do not place the suction port or any other accessories on your eyes or ears.
• When connected to the vacuum cleaner, do not put it in your mouth.
• Do not use the product when the device is charging.

Preparation for Use

Assemble the battery pack and the entire machine: Insert one end of the battery pack into the position below the main unit handle. After hearing a click, the battery pack is assembled and can be turned on for use. To remove the battery pack, hold the main unit handle with one hand and the battery pack with the other, and press the battery pack lock button simultaneously, then pull out the battery pack.

Assemble the Conductive Tube: Insert the end of the conductive tube into the main unit. After hearing a click, the conductive tube is installed and locked. To remove it, hold the main unit with one hand and the conductive tube with the other.

The Electric Floor Brush: Connect the interface of the electric floor brush to the main unit. To remove the electric floor brush, pull the interface out after hearing a click.

Assemble and Disassemble: To assemble, push the interface to install the electric floor brush until it clicks. To disassemble, pull the interface to remove the electric floor brush until it clicks.

Use 2 in 1 Nozzle: The two-in-one nozzle can be used for cleaning various areas, such as corners of furniture or tight spaces. Press the button of the electric floor brush to turn it off before using the 2-in-1 nozzle.

Telescopic Tube Adjustment: The telescopic tube can be adjusted to three lengths: The longest for extended reach, moderate for standard usage, and shortest for focused cleaning.

Display Screen and Buttons

The vacuum cleaner features several buttons and a display screen:

• 1. Switch Button: Turns the vacuum cleaner on/off.
• 2. Battery Indicator Light: Shows the battery status.
• 3. Shift Button: Cycles through different suction gears (Low, Medium, High).
• 4. Dust-Scraping Push Rod Handle: Used for cleaning the dust cup.
• 5. Display Screen: Shows battery level and operational status.

Digital Symbols on the Display Screen:

• 6. Low Gear: Indicated by one fan symbol.
• 7. Medium Gear: Indicated by two fan symbols.
• 8. High Gear: Indicated by three fan symbols.
• 9. Host Blockage Warning Light: Illuminates if the main unit is blocked.
• 10. Floor Brush Blockage Warning Light: Illuminates if the floor brush is blocked.
• 11. Battery Indicator: Shows charging status.
• 12. Battery Level: Displays the remaining battery percentage.

Troubleshooting

Note: If other fault display codes appear, please contact after-sales service.

Preparation For Use

1. Before use, ensure that the product is fully charged.
2. Choose appropriate accessories for installation based on the cleaning object.
3. Press the start switch button. The vacuum cleaner display screen will show the working gear. It starts in low gear (one fan symbol), offering the longest battery life but lower suction. Press the shift button to switch to medium gear (two fan symbols) for increased suction. Press the shift button again to switch to high gear (three fan symbols) for maximum suction. Choose different gears according to the dirt level. To stop working, press the switch button in any gear.

Charging Precautions

1. Ensure the power supply is safe and the local voltage is consistent with the voltage recognized by the product.
2. The charger hole is located on the side of the battery pack. Insert the charging plug into the device's charging port.
3. When the device is charging, the power indicator light flashes green, the battery level indicator light rises slowly, and the battery pack indicator light flashes green. When the battery level indicator light remains constantly green, the battery is fully charged.
4. During use, when the battery level indicator light shows below 5, the battery light flashes green, indicating the battery is low. When the battery runs out and the machine fails to work properly or does not stay on when turned on, it needs to be recharged.
5. Note: The device does not work while charging.

Charging Process

1. First, plug the charger into the charging port of the vacuum cleaner.
2. Then, insert the other end of the charger into the vacuum cleaner's battery pack. When charging, the display screen will show the current battery level. The battery pack indicator light will flash to indicate charging. After the battery pack is fully charged for 10 minutes, the display screen will return to its idle state.
3. Alternatively, you can remove the battery pack and charge it separately.

Clean The Dust Cup

The dust cup should be cleaned in time to ensure optimal cleaning performance, especially when it reaches its maximum capacity.

1. Press the dust cup release button to remove the dust cup from the vacuum cleaner.
2. After emptying the dust cup, if there is still debris or hair on the cyclone, push the dust-scraping push rod handle at the top of the vacuum cleaner all the way down to scrape off the remaining garbage. (Do not use this function while the vacuum cleaner is running.)

Clean or Replace the HEPA Filter

The HEPA filter can become clogged over time, reducing suction power and cleaning efficiency. Regular cleaning is important.

1. Rotate the dust cup counterclockwise to remove it.
2. Rotate the cyclone counterclockwise and remove it.
3. Remove the HEPA filter from the cyclone.
4. Clean the cyclone and HEPA filter. Rinse and dry them thoroughly before reinstalling and using.

Clean the Electric Floor Brush

The electric floor brush may become blocked by large objects or entangled with hair or long strings. The roller brush requires regular cleaning.

1. Press the roller brush release button to remove the roller brush from the floor brush.
2. Remove any large objects. Use scissors or a blade to cut and clean entangled hair and strings. Reinstall the roller brush onto the electric floor brush. Exercise caution when using sharp objects.

Cleaning Safety Precautions

• Before cleaning any parts, turn off and unplug the vacuum cleaner.
• Do not clean any part of the vacuum cleaner in a dishwasher. Clean parts with a dry cloth if necessary.
• Clean accessories with a dry cloth.

Storage Instructions

Store the equipment and accessories properly for convenient future use.

1. Store the equipment and accessories horizontally on the floor or a table.
2. Wall-mounted storage: The main unit has a hanging slot at the rear that can be used with the included hanging rack. Fix the hanging rack to a wall or cabinet using screws. It is recommended to install the hanging rack at a height where the floor brush can touch the ground and near a power socket for charging. Place the product on the rack, ensuring it is securely hung. The charger wire can be inserted into the storage slot on the right side of the hanger. The two-in-one nozzle and other brush heads can be attached to the protruding columns on the hanger.

Environmental Protection

When the product reaches the end of its lifespan, do not dispose of it with regular household waste. Hand it over to an official recycling collection point for proper treatment and recycling to protect the environment.

Warning

All contents in this section are related to safety. Please ensure users adhere to these guidelines. Preventive measures have been taken to address risks, their magnitude, and possible accidents.

• Do not use unauthorized components; doing so may void the warranty.
• After opening the package, check for product damage and completeness of parts.
• If the power cord is damaged, it must be replaced by the manufacturer, their service department, or a similarly qualified entity to avoid danger.
• Children and individuals lacking civil capacity should use this product under guardian supervision.
• If a malfunction occurs, unplug the power supply immediately.
• Do not place the vacuum cleaner near heat sources or heat-generating objects to prevent deformation and affect usage.
• Ensure all filter elements are installed correctly before use. Do not operate the vacuum cleaner without a filter element.
• Check the plug and power cord for good condition to avoid the risk of electric shock.
• Ensure the power supply is safe and the local voltage matches the product's voltage.
• It is recommended to cut off the power supply before handling the product, especially concerning children's safety.
• This product is for household use only. Do not use it outdoors.
• Do not use the vacuum cleaner to suck up burning cigarette butts.
• Do not inhale detergent, kerosene, gasoline, paint, sewage, or other liquids, as this can cause motor failure.
• Avoid sucking up lint or large paper balls, which can clog the suction port, pipe, or hose, potentially causing motor failure or housing deformation. If blockage occurs, stop immediately and clean the unit after unplugging.
• When cleaning the vacuum cleaner, use a damp cloth or neutral detergent. Avoid gasoline or banana oil, which can cause the shell to crack or fade.
• Do not use the vacuum cleaner to suck up fine particles like cement, gypsum powder, or starch, as this can clog the filter and burn out the motor. If fine particles are inhaled, clean the filter promptly.
• The battery requires full charging for the first three uses to complete battery activation protection.

Disposal

This product must not be disposed of as unsorted household waste. Separate waste for proper treatment and recycling in compliance with local regulations.

Warranty

Products purchased directly from the Green Lion website or shop come with a 24-month warranty. Products purchased from approved sellers have a 12-month warranty. To extend the warranty, visit https://www.greenlion.net/warranty, fill out the form, and upload a picture of the product. An email confirmation will be sent upon acceptance.

Contact Us

For any questions regarding this Privacy Policy, please contact Green Lion:

• Website: https://www.greenlion.net/
• Sales: sales@greenlion.net
• Service Support: Support@greenlion.net
• Telegram: @greenlion_global
• Instagram: @greenlion_global