Green Lion GL-SR60 Robot Vacuum Cleaner

Safety and Warnings

Safety Precautions (رمز الأمان)

When using the product, please exercise caution at all times and follow these instructions carefully:

Please read the instructions carefully before using the product and ensure it is stored properly.

Warning (تنبيه)

1. Avoid potential issues during cleaning. Clean the power cord and remove small objects from the floor to prevent obstacles. Keep carpet edges away from the product and ensure it does not contact tablecloths, hanging curtains, or similar floor-level items.
2. If the product will be used in a suspended environment like stairs, test it first to ensure its edge-sensing capability prevents falls. Use a protective barrier on the edge of the suspended area to prevent the product from falling.
3. Ensure the protective tool does not cause personal injury, such as tripping.
4. Use the product according to instructions. Only use recommended or manufacturer-supplied accessories.
5. Ensure the power source voltage matches the voltage specified on the charging base.
6. Ensure the dustbin and filter materials are installed correctly before using the product.
7. If the power cord is damaged, it must be replaced by the manufacturer or its service department, or a similar department, to avoid danger.
8. Turn off the product before cleaning and maintenance.
9. Unplug the product from the electrical outlet before cleaning and maintenance.
10. Before disposing of the product, ensure it is turned off and the battery is removed.
11. If the product is not used for a long period, please disconnect the power supply.

Disposal and Battery Removal

Before disposing of the product, ensure batteries are removed and disposed of according to local laws and regulations. Please follow local laws and regulations for disposing of old batteries. Do not allow children under 8 years old or individuals with mental impairments to use the product. If use is necessary, ensure it is under parental supervision. Do not allow children to ride on or use the product as a toy. The product is for indoor use only. Do not use it outdoors, in commercial, or industrial areas. Do not use the product in a room where infants sleep. Do not use damaged power cords or plugs. Do not use the product if it malfunctions due to falling, damage, or water exposure. For injury prevention, the product must be repaired by the manufacturer or its after-sales service if necessary. Always use the product according to instructions; the company is not responsible for any loss or injury resulting from misuse.

Caution (تحذير)

• Only use original charging bases specifically provided by the manufacturer. Users are prohibited from replacing the battery without authorization. If the battery is damaged, contact the manufacturer, authorized dealer, or a similar technician for replacement.
• Do not use products in environments with breakable items.
• Do not use products in environments with extreme temperatures (above 40°C or below 0°C).
• Do not place hair, clothing, fingers, or other body parts near the product's vents or operating parts.
• Do not use products on wet or water-saturated floors.
• Prevent the product from absorbing materials like stones or waste paper that may obstruct it.
• Do not absorb flammable materials such as gasoline, printers, or copiers.
• Do not use products in clean areas containing flammable materials.
• Prevent the product from absorbing combustible materials like cigarettes, matches, ash, etc., which may cause fire.
• Do not place any objects at the suction port. Do not use the product if the suction port is blocked. Clean dust, lint, and hair at the suction port to ensure smooth airflow.
• Handle the power cord carefully to avoid damage. Do not use the power cord to pull or drag the product or charging base. Do not use the power cord as a handle, secure it to the door, and pull it from the sharp corner. Keep products away from the power cord, which should be kept away from heat sources.
• Do not use a damaged charging base. If the charging base is damaged, it must be repaired or replaced by the manufacturer, authorized dealer, or technicians to avoid danger.

Battery Removal (إزالة البطارية)

The following information applies only to robot disposal, not routine instructions. The battery can only be removed if its capacity is fully depleted. Under no circumstances should the battery contact metal objects. Battery removal steps are as follows:

1. Let the robot run until power is cut off without touching the charging base.
2. Turn off the robot's power switch.
3. Unscrew the battery cover.
4. Remove the battery cover.
5. Pull the battery connector and remove it.

If you wish to dispose of the battery in the device, please do not dispose of it with household waste. Instead, hand it over to the nearest abandoned battery recycling center or after-sales service center for centralized processing. The following description is not for the average user but a final disposal statement. The chemicals in the integrated battery pollute the environment. Before disposing of the waste robot, ensure the battery is removed beforehand and taken to a specialized battery recycling point for centralized disposal.

Attention: Battery leakage can harm the human body. In case of leakage, avoid contact with eyes or skin. If accidental contact occurs, wash hands with water and rinse eyes immediately. If discomfort persists, seek medical attention.

Caution: Do not use products in environments with open scratches or breakable items. Do not use products in extreme temperatures (above 40°C or below 0°C). Do not use products near water pipes or valves that are leaking. Do not use products near water pipes or valves that are leaking.

Equipment Replacement (استبدال المعدات)

Generally, the software is updated every two months, but the update cycle is not fixed. After 3 years of iteration, critical security vulnerability solutions will be updated for products that have passed the iteration cycle.

Components (المكونات)

Packaging and Accessories:

• Robot
• Integrated Unit (Dock)
• Charging Base
• Dustbin
• Side Brush (x2)
• Mop Cloth
• Dustbin Bag

Part Names:

• Wi-Fi Indicator (Wi-Fi disconnected ❓, Fllink: Connected to Wi-Fi ?, Chang Liang: Wi-Fi connected to the internet ✔️)
• Start/Clean/Pause Button (Press button to start cleaning, long press to pause)
• Auto-Recharge / Pause (Initiate recharge / Pause auto-recharge)
• Cleaning
• Brush Opening
• Reset Button
• Dustbin

Robot Top View:

• Universal Wheel
• Charging Contact
• Side Brush
• Battery Cover
• Drive Wheel
• Rotating Brush
• Mop Holder
• Cliff Sensor
• Charging Contact

Note: The reset button is located under the panel. Pressing it will shut down the host device and reset the system. Use this feature with caution.

Dock Components:

• Dustbin
• Water Tank
• Indicator Light
• Dust Collection Port
• Charging Connector
• Inclined Base
• Main Board
• Front Bumper
• Collision Sensor
• Dust Collection Port
• Charging Connector
• Air Outlet (Dryer)
• Dustbin Lift Lever
• Main Filter
• HEPA Filter
• Dustbin

Installation (التركيب)

Precautions (احتياطات)

Before operating the vacuum cleaner, clear wires and scattered items from the floor, and remove items that are easily knocked over, fragile, valuable, or dangerous. Avoid entanglement, sticking, pulling, or falling from the main unit, as this may cause personal injury or property damage.

When used in a suspended environment, it must be protected by railings to prevent it from falling or being pushed into other objects, otherwise, it may cause personal injury or property damage. Do not use the robot to clean liquids. ❌

Preparations (التحضيرات)

1. Remove the protective material from the sides of the robot.
2. Attach the side brush and mop holder. A "click" sound indicates successful installation.
3. Attach the charging base.

Charging the Host (شحن المضيف)

Place the charging base against a wall on a hard, level surface. Ensure there are no objects within 0.5 meters to the sides and 0.8 meters in front of the base.

Note: If there are mirrors, reflective edges, or other reflective objects near the charging base, cover the lower part by 14 cm. Do not place the charging base in direct sunlight. It is recommended to place it in an area with a strong Wi-Fi signal for a better user experience.

Dock Water Tank (خزان محطة القاعدة)

Open the tank cover, add water, and then place the water and sewage tanks into the charging base.

Automatic Water Tank Connection Method

The robot automatically connects to the water tank.

App Download and Setup (تنزيل التطبيق, الشبكة, التشغيل/الشحن)

App Download

Method 1: Scan the QR code on the device/manual and download/install the app for free. Method 2: Open your phone's app store, search for "SmartLife", and install it.

Connect to Network (الشبكة)

Log in to the App: Follow the on-screen instructions to register or log in.

Enable Bluetooth: Ensure Bluetooth is enabled on your device.

Wi-Fi Connection: Simultaneously press and hold the "( )" and " T" buttons on the robot for 3 seconds. After hearing "Access Point Mode", release the buttons. The Wi-Fi indicator will blink slowly, and the robot will enter network connection mode.

Connecting the Host to Wi-Fi

1. Tap "Add Device" or "+" in the upper right corner.
2. The robot will be detected. Tap "Add".
3. Select your 2.4GHz Wi-Fi network and enter the password.
4. Tap "Next" to proceed.
5. Tap "DONE" to complete the connection.

Power On/Charge (التشغيل/الشحن)

To Start: Press and hold the "( )" button for 3 seconds. The indicator light will illuminate, and the robot will start working successfully.

To Stop: Press and hold the "( )" button for 3 seconds. The indicator light will turn off, and the robot will stop working.

The robot cannot shut down while charging.

Press the "?" button briefly. The robot will automatically return to the charging base to start charging. After the robot enters the charging base, wait about 5 seconds to hear the "charging started" sound.

When the charging base is connected to power, the robot will automatically return to charge and empty the dustbin when needed. It is recommended that the main motor starts from the charging base and does not move to it during cleaning.

Smart Cleaning Modes

Intelligent Cleaning (التنظيف الذكي - Default Mode)

The robot scans the environment, creates a map, and intelligently divides areas. It will complete cleaning each area one by one.

On-Demand Cleaning (التنظيف حسب الحاجة)

Use the mobile app to select the desired cleaning function. Tap a point on the map, and the robot vacuum will move to the specified location and clean a 1.6m x 1.6m square area centered on that point. Before using this function, complete the initial map drawing in the mobile app.

Specific Area Cleaning (تنظيف المنطقة المحددة)

Use the mobile app to select the specific area cleaning function, then select the area to be cleaned on the map. The robot vacuum will clean it. Before using this function, complete the map building for the first cleaning in the mobile app. The main unit may enter areas not on the map; please remove obstacles from the floor around the mapped area. This area cannot be used as a safe isolation zone.

No-Go Zone Setting (إعداد المنطقة المحظورة)

Use the mobile app to select the no-go zone editing function, then select and define the no-go zone on the map for cleaning. The machine will not enter the set area for cleaning.

Daily Maintenance (الصيانة اليومية)

Roller Brush (فرشاة الأسطوانة)

1. Flip the machine over, press and hold the roller brush card clip, then remove the roller brush cover.
2. Slide the roller brush down.
3. Use the brush tool to remove debris from the cavity, main brush, and roller brush, then remove any tangled hair from the roller brush.

Recommended cleaning frequency: Once a week.

Side Brush (فرشاة جانبية)

Flip the device over and pull the side brush vertically. Remove tangled hair and reinstall the side brush onto the robot.

Recommended cleaning frequency: Once a week.

Mop Cloth (قطعة قماش السحب)

Flip the device over and pull the mop cloth vertically upwards. Remove tangled hair and reinstall the mop cloth onto the robot.

Recommended cleaning frequency: Once a week.

Dustbin (صندوق الغبار)

1. Press the dustbin clip and remove the dustbin.
2. Lift the dustbin and open the main filter to dispose of waste.
3. Open the main filter screen and remove the HEPA filter.
4. Clean the filter screen and wash it thoroughly with clean water without adding any detergent.
5. Clean the dustbin and filter screen in natural drying mode. Avoid direct sunlight. It needs to be completely dry before use.

Recommended cleaning frequency: Once a week.

Recommended cleaning frequency for main filter: Once every three months.

Infrared Sensor Cleaning (نظف مستشعر الأشعة تحت الحمراء)

Clean the infrared sensors. Recommended cleaning frequency: Once every three months.

Charging Contact Cleaning (تنظيف نقطة اتصال الشحن)

Clean the charging contacts on the robot. Recommended cleaning frequency: Once every three months.

Charging Base Cleaning (تنظيف قاعدة الشحن)

Clean the charging base. Recommended cleaning frequency: Once every three months.

Universal Wheel Cleaning (تنظيف عجلة القيادة العالمية)

Clean the universal wheel. Recommended cleaning frequency: Once every three months.

Battery Maintenance (صيانة البطارية)

1. The host device has a built-in rechargeable lithium-ion battery. To maintain battery performance, please ensure the host device is charged during daily use.
2. If the device is not used for a long period, turn it off and charge it every three months to prevent battery damage from over-discharge.

Firmware Upgrade (ترقية البرنامج الثابت)

Use the firmware upgrade function via the mobile app. When a new firmware version is detected, follow the instructions to upgrade. During firmware upgrade, ensure the battery level is at least 50%. It is recommended to keep the device on the charging base and charging.

Specifications (المواصفات)

FAQ (الأسئلة الشائعة)

FCC Statement (بيان لجنة الاتصالات الفيدرالية (FCC))

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement

This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device should be installed and operated with a minimum distance of 20 cm between the radiator and your body.

Disposal (التخلص)

This product should not be disposed of as unsorted household waste. It is important to separate this waste for treatment and recycling in accordance with local regulations for waste management.

Warranty (الضمان)

Products purchased directly from the Green Lion website or our store come with a 24-month warranty.

When purchasing Green Lion products from any of our authorized distributors, you will receive a 12-month warranty. If you wish to extend this warranty, visit our website at https://www.greenlion.net/warranty and fill out the form with your information. Don't forget to upload a picture of the product. After we review and accept your request, we will send you an email to confirm the extension of your product's warranty.

For more information, please visit: https://www.greenlion.net/warranty

Contact Us (اتصل بنا)

If you have any inquiries regarding this privacy policy, please contact us via:

• Website: https://www.greenlion.net/
• Sales: sales@greenlion.net
• Customer Support: Support@greenlion.net
• Telegram: @greenlion_global
• Instagram: @greenlion_global