Product Components
The vacuum cleaner consists of the following parts:
- 1. Power Button: Used to turn the device on and off.
- 2. Battery Indicator: Shows the battery status.
- 3. Handle Release Button: Used to detach the handle assembly.
- 4. Dust Release Lever: Helps clear debris from the dustbin.
- 5. Dust Cup: Collects dust and debris.
- 6. Dust Release Button: Releases the dust cup for emptying.
- 7. Telescopic Tube Connector: Connects the telescopic tube to the main unit.
- 8. Floor Brush Release Button: Detaches the floor brush head.
- 9. Power Switch: (Likely refers to the main power control, possibly same as 1).
- 10. Display Screen: Shows operational information and error codes.
- 11. Battery Indicator: (General indicator).
- 12. Battery Level: Displays the remaining battery charge.
Diagram Description: An illustration shows the main body of the vacuum cleaner with labels pointing to various components like the power button, dust cup, telescopic tube, and floor brush. Separate illustrations show accessories like the charging adapter and wall mount.
Specifications
| Attribute | Value |
|---|---|
| Material | ABS |
| Motor | Brushless DC Motor |
| Rated Power | 430 W |
| Output Voltage | 35 V |
| Frequency | 50/60 Hz |
| Noise Level | ≤ 75 dB |
| Suction Power | 18.1 / 10.34 kPa |
| Airflow | 0.82 m³/min |
| Charging Input | 100-240 V |
| Battery Capacity | 2500 mAh, Lithium-ion |
| Dustbin Capacity | 900 ml |
| Charging Port | UK Plug, 1.8m Cable |
| Charging Time | 4.5 hours |
| Working Time | 15 / 25 / 45 minutes |
| Product Size | 26.5 x 25.5 x 120 cm |
| Product Weight | 2.40 kg |
Important Notes
Before using this appliance, please read this user manual carefully and keep it for future reference.
- Charge the appliance before use.
- Ensure the charger voltage matches your local power source voltage before connecting.
- Do not use the appliance if the plug, power cord, or the appliance itself is damaged.
- If the power source for this electrical appliance is damaged, please replace it immediately to avoid danger.
- Keep electrical appliances out of the reach of children.
Usage Precautions
- Do not inhale water, liquids, flammable materials, or sharp objects.
- Do not point the suction port or any accessories at your eyes or ears. Do not put the vacuum cleaner in your mouth when connecting it.
- Do not use the product while it is charging.
Assembly and Setup
Battery Installation
Insert one end of the battery pack into the slot below the main unit handle in the direction shown. You will hear a click when the battery pack is ready for use. To remove the battery pack, hold the main unit handle with one hand and the battery pack with the other, and press the battery release button simultaneously. Then, you can pull out the battery pack.
Diagram Description: Two illustrations show how to insert the battery pack into the main unit until it clicks, and how to press a release button to remove it.
Telescopic Tube Connection
Insert the end of the telescopic tube into the main unit. You will hear a click when the tube is securely attached and locked. To remove it, hold the main unit with one hand and the telescopic tube with the other.
Diagram Description: Two illustrations show how to insert the telescopic tube into the main unit until it clicks, and how to pull them apart for removal.
Floor Brush Attachment
Connect the floor brush head to the main unit. You will hear a click when it is attached. To remove the floor brush head, pull it after hearing a click.
Diagram Description: Two illustrations show how to connect the floor brush head to the main unit until it clicks, and how to detach it.
Assembly and Disassembly
Assembly: Push the head to attach the electric floor brush until you hear a click.
Disassembly: Pull the head to remove the electric floor brush until you hear a click.
Diagram Description: Two illustrations show the floor brush head being pushed onto the main unit for attachment and pulled off for removal.
Using the Vacuum Cleaner
Using the 2-in-1 Nozzle
The 2-in-1 nozzle can be used for cleaning various areas, such as furniture corners or tight spaces. Press the floor brush button to stop the electric floor brush if necessary.
Diagram Description: Illustrations show the 2-in-1 nozzle being used in different configurations, possibly attached to the tube or main unit for specific cleaning tasks.
Adjusting the Telescopic Tube
The telescopic tube can be adjusted to different lengths:
- Longest: For extended reach, suitable for large areas.
- Medium: Ideal for normal use.
- Shortest: Ideal for focused cleaning, such as small spaces.
Diagram Description: An illustration shows the telescopic tube at three different lengths: shortest, medium, and longest.
Button and Display Meanings
Understanding the buttons and symbols on the vacuum cleaner and its display screen:
- 1. Power Button: Turns the device on/off.
- 2. Battery Indicator: Shows battery status.
- 3. Gear Shift Button: Adjusts suction power levels.
- 4. Dust Release Handle: Used to open the dustbin for emptying.
- 5. Display Screen: Shows operational status and error codes.
- 6. Low Gear: Lowest suction power setting.
- 7. Medium Gear: Medium suction power setting.
- 8. High Gear: Highest suction power setting.
- 9. Obstruction Warning Light (Host): Illuminates if there is an obstruction in the main unit.
- 10. Obstruction Warning Light (Floor Brush): Illuminates if there is an obstruction in the floor brush.
- 11. Battery Indicator: (General indicator).
- 12. Battery Level: Displays the remaining battery charge.
Diagram Description: An illustration points out each button and indicator on the vacuum cleaner body and handle.
Error Codes and Solutions
| Abnormal Condition | Error Code | Solution |
|---|---|---|
| Using an incompatible charger | E1 | Please use the charger provided with this product. |
| Stuck buttons (power or speed control) | E2 | Ensure the power button and speed control button are not stuck. |
| Abnormal battery | E3 | Reinstall the battery. |
| Floor brush or roller obstruction | E40 / E50 | Clean tangled hair and debris from the floor brush roller. |
| Host obstruction | EV | Clean the high-efficiency (HEPA) filter, the mesh filter, and the dustbin in a timely manner. |
| Over-discharge temperature protection | EA | Leave the battery idle for a period; it will function normally. |
Note: If other error codes appear, please contact after-sales service.
Preparation for Use
- Before use, ensure the product is fully charged.
- Select the appropriate accessories for the cleaning task.
- Press the power button; the vacuum cleaner's display screen will light up from bottom to top, and it will start operating in low gear.
In low gear, the battery life is longer, but the suction power is lower. Pressing the gear shift button will switch the vacuum cleaner to medium gear, increasing suction power. Pressing the gear shift button again will switch to high gear, providing maximum suction power. You can select different gears based on the level of dirt. To turn off the vacuum, press the gear shift button in any gear.
Diagram Description: Illustrations show the vacuum cleaner in different operational states, possibly demonstrating gear selection or accessory attachment.
Charging Precautions
- Ensure the power source is safe and the local voltage is compatible with the voltage specified for the product.
- The charging port is located on the side of the battery pack, as shown in the figure. Insert the charger plug into the device's port.
- While the device is charging, the power indicator will light up green, the battery level indicator will rise slowly, and the battery indicator will flash green. When the battery level indicator remains solid green, it indicates that the battery is fully charged.
Note: The device does not operate while charging.
Diagram Description: Illustrations show the charging port on the battery pack and the charger being plugged in.
Charging Process
- First, connect the charger to the vacuum cleaner's charging port.
- Then, insert the other end of the charger into the vacuum cleaner's battery. When the vacuum cleaner is charging, the display screen will slowly scroll from bottom to top to show the current battery level. Simultaneously, the battery indicator will flash to indicate charging is in progress.
- After 10 minutes of full charge, the display screen will scroll slowly from top to bottom and then disappear.
You can also remove the battery pack and charge it separately.
Diagram Description: Two illustrations show the charging process, one with the charger connected to the vacuum and another showing the battery being charged separately.
Cleaning the Dust Cup
When the dust cup reaches its maximum capacity, it should be cleaned promptly to ensure optimal cleaning performance.
- Using the dust cup shown in the image below, press the dust cup release button to detach the dust cup from the vacuum cleaner.
- After emptying the waste from the dust cup into the trash bin, if some dust or hair remains in the cyclone, you can use the dust release lever located on top of the vacuum cleaner. Push the lever down completely, and the remaining waste will be removed, as shown in the following image. (Do not use this function when the device is operating).
Diagram Description: Illustrations show how to press a button to detach the dust cup and how to use a lever to clear debris from inside the dust cup.
Cleaning or Replacing the HEPA Filter
The HEPA filter will become clogged after a period of use, reducing the vacuum cleaner's suction power and cleaning capability. Therefore, it is essential to clean the HEPA filter in a timely manner.
- Rotate the dust cup counter-clockwise to remove it.
- Then, rotate the cyclone assembly counter-clockwise and remove it.
- Remove the HEPA filter from the cyclone assembly.
- Clean the cyclone assembly and the HEPA filter in a timely manner, rinse them, and dry them thoroughly before reassembling and using them.
Diagram Description: Illustrations show the steps for removing the dust cup, cyclone, and HEPA filter, followed by cleaning and reassembly.
Cleaning the Electric Floor Brush
The electric floor brush may become clogged with large debris or entangled with hair or long threads. Therefore, the roller brush should be cleaned promptly.
- Press the roller release button shown in the image to remove the roller brush from the floor brush head.
- Remove large debris. Use a blade or scissors to cut and clean hair and long threads. Then, reinstall the roller brush onto the electric floor brush.
Be careful not to injure yourself or others when using scissors and blades.
Diagram Description: Illustrations show how to press a button to release the roller brush from the floor brush head, and how to clean it.
Cleaning Safety Precautions
Before cleaning any part of the vacuum cleaner, ensure the appliance is turned off and unplugged from the power source.
- Do not clean any part of the vacuum cleaner in a dishwasher. If necessary, clean parts with a dry cloth.
- Clean accessories with a dry cloth.
Storage Instructions
To facilitate later use, please store the equipment and accessories properly.
- You can store your equipment and accessories horizontally on the floor or a table.
- Wall-mounted type: There is a hanging hole on the back of the main unit, which can be used with the hanging rack in the accessories. The hanging rack must be fixed to the wall or cabinet using screws. It is recommended to install the hanging rack at a height that allows the floor brush to touch the ground.
- It is also recommended to install it near a power outlet for charging.
- Place the product on the rack as shown in the diagram, and gently pull the product forward to ensure it is securely fixed to the rack.
- You can insert the charger cable into the storage slot on the right side of the hanging bracket for easy charging. The dual-use nozzle and other brush heads can be attached to the protruding hanging post.
Diagram Description: Illustrations show different storage methods, including horizontal storage and wall-mounted storage using a bracket.
Environmental Protection
When the product reaches the end of its life, do not dispose of electrical appliances and batteries with ordinary household waste. Please hand them over to an official recycling point. This contributes to better environmental protection.
Warning
Note: All content in this project relates to safety. Please ensure users comply with it. To ensure correct use of this product, preventive measures have been taken in this project. Please pay attention to the risks, their severity, and potential accidents.
- Using any components other than those authorized by the manufacturer is prohibited. If the device malfunctions as a result, the warranty will be automatically terminated.
- After opening the package, please check the product for damage and ensure all parts are complete.
- If the power cord is damaged, to avoid danger, it must be replaced by the manufacturer, the maintenance department, or a similar entity.
- Children and individuals who are not capable of acting properly should use this product under the supervision of their guardians.
- If a malfunction occurs, disconnect the power source immediately.
- Please do not place the vacuum cleaner near heat sources or other flammable materials.
Further Usage Guidelines and Warnings
- Keep away from heat sources to prevent deformation of plastic components and impact on usage.
- When using the vacuum cleaner, please pay attention to every installed filter element. Do not use the vacuum cleaner without a filter element.
- Ensure the plug and power cord are checked. They must be in good condition to avoid the risk of electric shock.
- Ensure the power source is safe and the local voltage matches the product's specified voltage. We recommend disconnecting the power source before handling the product. It is also recommended to take the same precautions for any potential risks, especially for children who are at risk.
- This product is for household use only. Do not use it outdoors.
- Please do not use the vacuum cleaner to vacuum cigarette butts to avoid danger.
- Do not inhale detergents, kerosene, gasoline, paint, or wastewater, or any other liquids, to prevent them from entering the motor and causing it to malfunction.
- When using the vacuum cleaner, do not vacuum lint or large paper balls, as they may easily clog the suction port, suction tube, or hose. Otherwise, it may cause the motor to malfunction or the housing to deform. If inhalation causes clogging, stop immediately and unplug for cleaning.
- When cleaning the vacuum cleaner, please use a damp cloth or a neutral detergent. Do not use gasoline, thinner, etc., as it may cause the casing to crack or fade. Please do not use the vacuum cleaner to vacuum iron particles such as cement, gypsum powder, and starch, as it may cause malfunctions such as clogging of the vacuum cleaner filter and burning out the motor. If iron particles are vacuumed, please clean the filter in a timely manner.
- When the product is manufactured, the battery is only charged and tested. Therefore, it should be used after fully charging the goods upon receipt.
- Please ensure the first three charges are completed fully to complete the battery activation protection.
Disposal of This Product
This product should not be disposed of as unsorted household waste. It is important to separate this waste for proper treatment and recycling, in accordance with local waste management regulations.
Warranty
Products purchased directly from the Green Lion website or our store come with a warranty for 24 months.
When purchasing Green Lion products from any of our authorized distributors, you will receive a warranty for 12 months. If you wish to extend this warranty, visit our website at https://www.greenlion.net/warranty and fill out the form with your information. Don't forget to upload a picture of the product. After we review and accept your request, we will send you an email to confirm the extension of your product's warranty.
For more information, please visit:
Contact Us
If you have any inquiries regarding this privacy policy, please contact us via:
- Website: https://www.greenlion.net/
- Sales: sales@greenlion.net
- Support: Support@greenlion.net
- Instagram: @greenlion_global
