Green Lion Multi-Force Vacuum, Air Blower, and Air Duster

Manual Preface

1. Please read all contents of this manual carefully before using this product.
2. Keep this manual properly. If you transfer the product to a third party for use, please attach this manual with the machine.
3. Any operation inconsistent with the instructions in the manual may cause serious personal injury, property loss, or damage to the product itself.
4. Green Lion will not bear any legal liability for the loss caused by the failure to operate in accordance with the product instructions.
5. Please read the instructions that are very important to your personal safety carefully to avoid accidents and possible damage to the product.
6. Please be very careful when working with the product to avoid danger.
7. Keep the product properly and keep it out of the reach of children and people who are unable to judge the environmental risk.
8. Do not store the product at a high place to avoid the risk of accidental fall.

Specifications

Quick View

1. HEPA Filter

2. Dust Collecting Bin

3. Power Switch

4. Air Vent

5. Handle

6. USB Charger

[Diagram: A line drawing of the Green Lion Multi-Force Vacuum, Air Blower, and Air Duster with numbered callouts pointing to the HEPA filter, dust collecting bin, power switch, air vent, handle, and USB charger.]

Components

The product includes:

• Charging Line
• Multifunctional Suction Nozzle Combination
• Air Exhaust and Blowing Nozzles

[Diagram: Line drawings of the various components included with the product: charging cable, multiple suction/blowing nozzles, and the main unit.]

Installation Instructions

Installation of main machine dust collecting cup group:

1. Install the HEPA filter cover into the dust collecting cup as shown in the figure.
2. Rotate the dust collecting cup assembly counterclockwise. A "click" sound indicates that the installation is successful.

[Diagram: Two illustrations showing the installation of the dust collecting cup. The first shows inserting the HEPA filter cover into the cup. The second shows rotating the assembled cup onto the main unit until it clicks.]

Dust Collection Mode:

Insert the two-in-one flat suction into the suction port of the host.

[Diagram: An illustration showing a flat nozzle being inserted into the suction port of the main unit.]

Blowing Mode:

According to the arrow direction as shown in the figure, install the air nozzle on the host.

[Diagram: An illustration showing various air nozzles being attached to the air exhaust port of the main unit.]

Extraction Mode:

According to the arrow direction as shown in the figure, install the air extraction nozzle on the host.

[Diagram: An illustration showing an extraction nozzle being attached to the suction port of the main unit.]

Usage Method

Preparation Before Use:

Charge with a 1a~2a mobile phone charger. Make sure that all parts of the wireless vacuum cleaner have been assembled in place. Check whether the power is sufficient to ensure the normal operation of the product.

Do not start the machine when charging. The red indicator light of the charging line indicates a normal charging state, and the green light is always on when fully charged.

Insert the charging cable into the USB interface and the other end into the charging interface.

Charging Instructions:

Insert the charging cable into the USB interface and the other end into the charging interface.

Do not start the machine when charging. The red indicator light of the charging line indicates a normal charging state, and the green light is always on when fully charged.

Start-up:

Press the switch button for 3 seconds. The main machine starts to the standard working mode, and the working indicator light is green and always on.

Close:

Press the switch button for 3 seconds to close.

[Diagram: An illustration highlighting the location of the switch button on the handle of the device.]

Be Careful:

When using a new battery or storing a battery for the first time for a long time, please fully charge the battery.

Please charge for more than 3 hours before the first use.

Please fully charge before long-term storage. If the battery enters the power shortage state, the machine will not be able to charge, affecting normal use.

Dust Cup Cleaning Instructions

Cleaning and Maintenance:

Clean the Dust Collecting Cup:

1. First, rotate the dust collecting cup in the direction shown in the figure and remove it from the host.

[Diagram: An illustration showing the dust collecting cup being rotated and removed from the main unit.]

1. Take out the HEPA filter screen in the dust bin and dump the garbage into the garbage can.
2. Separate the HEPA filter cover and dust collecting cup in sequence, and clean the HEPA filter cover with a brush. The dust collecting cup can be washed and dried before use.
3. To reinstall the dust bin, put the HEPA filter screen into the dust bin, and rotate and tighten it in the opposite direction according to step 1 above.

[Diagram: Three illustrations showing the cleaning process: removing the HEPA filter and emptying the dust bin, cleaning the HEPA filter cover with a brush, and reinstalling the HEPA filter into the dust bin.]

General Fault Analysis and Treatment

Environmental Protection Instructions

Hazardous Materials

This form is prepared in accordance with SJ / t11364.
◯: Indicates that the content of the hazardous substance in all homogeneous materials of the component is below the limit specified in GB / T 26572.
10: It means that the content of the hazardous substance in at least one homogeneous material of the component exceeds the limit specified in GB / T 26572.
The hazardous substances contained in some components of the product cannot be replaced under the current international technical level. The marked environmental protection service life of the product refers to the safe service life that the hazardous substances or elements contained in the product will not leak under normal service conditions. This table indicates that there are hazardous substances in Green Lion products, and the built-in products do not include all the above components.

This environmental protection service life is only applicable to the product working under the conditions specified in the user manual.

[Image: A Green Lion Multi-Force Vacuum, Air Blower, and Air Duster placed inside a car.]

Disposal

Do not dispose of discarded electrical appliances as unclassified urban waste. They should be handed over to an officially designated recycling center, which is beneficial for environmental protection.

Warranty

Products that you buy directly from the Green Lion website or shop come with a 24-month warranty.

When you buy Green Lion products from any of Green Lion's approved sellers, you only get a 12-month warranty. If you want to extend this warranty, go to the Green Lion website at https://www.greenlion.net/warranty and fill out the form with your information. Don't forget to upload a picture of the product too. After Green Lion has checked and accepted your request, they will send you an email to confirm that your product's warranty has been extended.

For more info, please check: https://www.greenlion.net/warranty

Contact Us

If you have any questions about this Privacy Policy, please contact Green Lion at:

Website: https://www.greenlion.net/

Sales: sales@greenlion.net

Service Support: Support@greenlion.net

Telegram: @greenlion_global

Instagram: @greenlion_global