STRÅLA LED Lamp
Product Information and Assembly Instructions
Product Overview
The STRÅLA is a decorative LED lamp from IKEA. Its light source is integrated and not replaceable. When the light source reaches the end of its lifespan, the entire luminaire must be replaced.
Important Safety and Usage Information
- ⚠️ Battery Removal: Always remove batteries before storing the lamp.
- ⚠️ Battery Type: Use only batteries specifically intended for this product.
- ⚠️ Battery Mixing: Do not mix old and new batteries, or batteries of different brands or types.
- ?️❌ Disposal: Batteries should not be disposed of in household waste. Please dispose of them responsibly according to local regulations.
Assembly and Operation
Step 1: Open the Lamp Base
To access the battery compartment, twist the lower part of the lamp base counter-clockwise [arrow indicates twisting motion].
Step 2: Install Batteries
Using a screwdriver ?, unscrew the battery compartment cover. Insert two AAA batteries, observing the correct polarity (+/-) indicated inside the compartment. Re-secure the battery compartment cover by screwing it back on.
Step 3: Close the Lamp Base
Twist the lower part of the lamp base clockwise [arrow indicates twisting motion] to close it securely.
Step 4: Timer Function
The STRÅLA lamp is equipped with an automatic timer. Turn the timer knob located on the side of the lamp base to set the timer. The light will automatically switch off after 6 hours of operation and will turn back on at the same time the following day.