STRÅLA LED Decorative Pendant Lamp
Safety Information and Warnings
Important safety information and usage instructions for the STRÅLA LED decorative pendant lamp are provided in multiple languages throughout this document. Please read and follow all instructions carefully.
Key warnings include:
- ⚠️ Battery Storage: Always remove batteries before storing the product.
- ⚠️ Strangulation Hazard: This product poses a strangulation risk. Hang it out of reach of young children.
- ⚠️ Cord Replacement: The external flexible cable or cord of this luminaire cannot be replaced. If the cord is damaged, the luminaire must be destroyed.
- ⚠️ Light Source: The light source of this luminaire is not replaceable. When the light source reaches its end of life, the whole luminaire shall be replaced.
- ⚠️ Battery Usage: Only use batteries that are intended for the product. Do not mix old and new batteries, or batteries of different brands or types.
(Full instructions and warnings are available in English, German, French, Dutch, Danish, Icelandic, Norwegian, Finnish, Swedish, Spanish, Italian, Hungarian, Polish, Estonian, Latvian, Lithuanian, Portuguese, Romanian, Slovak, Bulgarian, Croatian, Greek, Ukrainian, Serbian, Slovenian, Turkish, Indonesian, Malay, Thai, Arabic, Chinese, Traditional Chinese, Korean, and Japanese.)
Parts Included
The following components are included with your STRÅLA lamp:
- Pole Section 1 (long)
- Pole Section 2 (shorter, with integrated cord and connector)
- Hanging Hook
- Coiled Lantern String (with multiple spherical lamps)
(Diagram on page 11 shows these parts with quantities indicated as '1x'.)
Assembly Instructions
Follow these steps to assemble your STRÅLA lamp:
Step 1: Connect Pole Sections
Insert the end of the shorter pole section (with the cord) into the open end of the longer pole section. Ensure they are securely joined. (See diagram on page 12.)
Step 2: Attach Lantern String
Connect the lantern string assembly to the top of the assembled pole. The connector on the lantern string should fit into the top of the pole. (See diagram on page 13.)
Step 3: Secure Mechanism
Ensure the internal mechanism holding the lantern string is properly seated and secured. This may involve tightening small screws or clips. (See diagram on page 14.)
Step 4: Hang the Lamp
Use the provided hanging hook to suspend the lamp. Attach the hook to the top of the pole assembly and then hang it from a suitable fixture. Ensure the cord is managed safely. (See diagram on page 15.)
Steps 5, 6, 7: Battery Installation
To power the lamp, batteries are required. Follow these steps:
- Open the battery compartment cover, likely by unscrewing a small screw. (See diagram on page 16, step 5.)
- Insert the correct type of batteries (typically AA) into the compartment, observing the correct polarity (+ and -). Do not mix old and new batteries, or different types/brands. (See diagram on page 16, step 6.)
- Close the battery compartment cover and secure it with the screw. (See diagram on page 16, step 7.)
⚠️ Battery Disposal: Do not dispose of batteries in household waste. Follow local regulations for battery disposal. (Indicated by a crossed-out battery symbol.)
Timer Function
This lamp features an automatic timer function.
When set to the '6H' position, the light will automatically switch off after 6 hours of operation. It will then switch back on at the same time the following day.
The 'OFF' position disables the timer function.
(Diagram on page 17 illustrates the timer switch and its function.)
