TRIPPEVALS Cellular Blind Assembly Instructions
Brand: IKEA
Important Information Regarding Wall Mounting
Screws for fixing the blind to the wall are not included, as wall materials vary greatly. For advice on suitable screw systems, please contact your local specialized dealer.
Components
- 2 x Mounting brackets (part number 10081418)
- 1 x Hook for pull cord
Assembly Steps
Take the two mounting brackets (10081418). Align each bracket with the headrail of the TRIPPEVALS blind. Push each bracket onto the headrail until it clicks securely into place. Ensure both brackets are firmly attached.
Determine the desired mounting location on your wall or ceiling. Position the two mounting brackets at the appropriate spacing. Using suitable screws (not included), securely fasten each bracket to the wall or ceiling surface. Ensure the brackets are level and firmly attached.
Lift the TRIPPEVALS blind, with the brackets already attached to its headrail. Align the blind's brackets with the brackets installed on the wall or ceiling. Slide the blind's headrail into the wall-mounted brackets until it clicks into place. The blind should now be securely mounted.
Take the provided hook. Attach this hook to the bottom of the cellular blind. This hook is typically used to manage the pull cord for operating the blind.
