Costway NP10265 Folding Table

General Safety and Setup Instructions

Please read all instructions carefully and retain them for future reference.

• Separate and count all parts and hardware before assembly.
• Read through each step carefully and follow the proper order.
• It is recommended to assemble the product near its intended use area to avoid unnecessary movement once assembled.
• Always place the product on a flat, steady, and stable surface.
• Keep all small parts and packaging materials away from babies and children to prevent choking hazards. ⚠️

Unfolding the Table

Follow these steps to unfold the table:

1. Step 1: Unfold the Table

   Lay the table top on a flat surface. Unfold the table top, then pull the four table legs to an upright position. Ensure the table legs lock into place with an audible "click" sound.

   [Diagram Description: The table top is laid flat, and the four legs are pulled upwards until they click into place.]

2. Step 2: Adjust Table Legs

   To adjust a table leg, press the spring button on one side and insert it into the tube. Pull the table leg out slightly so the spring button does not pop out. Then, press the spring button on the other side to pull out the table leg fully.

   [Diagram Description: Shows the adjustment of a table leg. It depicts pressing a spring button on one side, inserting it into the tube, pulling the leg slightly, and then pressing the button on the other side to secure it.]

3. Step 3: Final Position

   You can now use the table after turning it over to stand on its legs.

   [Diagram Description: Illustration of the fully unfolded table standing on its four legs.]

Folding the Table

Follow these steps to fold the table:

1. Step 1: Shorten Legs

   Press the table legs to their shortest position. First, press the spring button on one side and insert it into the tube so the button no longer pops out. Then, press the spring button on the other side to push the table leg down.

   [Diagram Description: The table legs are being pushed down to their shortest position by pressing spring buttons on both sides.]

2. Step 2: Unlock and Fold

   Press the support poles on both sides to unlock the table legs. Fold the table.

   [Diagram Description: Diagram showing the table being folded. Support poles on both sides are pressed to unlock the legs, and the table is then folded.]

3. Step 3: Secure and Store

   Pull the side lock trigger and fold the table simultaneously. Ensure the handle is placed on the outside of the table for easier carrying.

   [Diagram Description: Diagram illustrating the final folding step. A side lock trigger is pulled, and the table is folded, with the handle positioned on the outside.]