Costway HW65911BN Console Table
User's Manual and Assembly Instructions
Safety Information
This instruction booklet contains IMPORTANT SAFETY INFORMATION. Please read and keep for future reference.
Parts List
Main Components:
- Part 1: Top Panel
- Part 2: Left Side Frame
- Part 3: Right Side Frame
- Part 4: Upper Back Support
- Part 5: Upper Back Panel
- Part 6: Lower Shelf
- Part 7: Lower Back Support
- Part 8: Bottom Panel / Drawer Front
- Part 9: Drawer Side (Left)
- Part 10: Drawer Side (Right)
- Part 11: Drawer Back Panel
- Part 12: Drawer Bottom Panel
- Part 13: Drawer Support Rails
Hardware:
| Identifier | Description | Quantity |
|---|---|---|
| A | Cam Lock Screw (3x12mm) | 8 |
| B | Cam Lock | 1 |
| C | Cam Lock | 1 |
| D | Screw (6x35mm) | 20 |
| E | Screw (8x30mm) | 9 |
| F | Screw (15x10mm) | 20 |
| G | Screw (6x30mm) | 6 |
| H | Screw (4x30mm) | 8 |
| I | Drawer Handle Ring | 2 |
| J | Drawer Handle Screw (4x16mm) | 2 |
| K | Drawer Runner | 1 |
| L | Drawer Runner | 1 |
| M | Wall Anchor Screw | 1 |
Assembly Steps
Step 1: Assemble Main Frame
Attach the left side frame (2) and right side frame (3) to the top panel (1) using four cam lock screws (A) and two cam locks (B, C) per side frame. Attach the left side frame (2) and right side frame (3) to the bottom panel (8) using ten screws (D) (6x35mm) in total (five per side).
Step 2: Attach Shelving and Back Supports
Attach the lower shelf (6) to the inside of the side frames (2, 3) using two screws (E) (8x30mm) per side. Attach the lower back support (7) to the rear of the side frames (2, 3) using two screws (G) (6x30mm) per side. Attach the upper back support (4) to the top rear of the side frames (2, 3) using two screws (E) (8x30mm) per side. Attach the upper back panel (5) to the rear of the side frames (2, 3) and the upper back support (4) using screws (F) (15x10mm).
Step 3: Secure Top Panel
Secure the top panel (1) to the side frames (2, 3) using six screws (D) (6x35mm) and additional screws (F) (15x10mm).
Step 4: Attach Drawer Runners to Console
Attach the drawer runners (9, 10) to the inside of the bottom panel (8) and side frames (2, 3) using screws (D, F, G).
Step 5: Assemble Drawer
Assemble the drawer box by attaching drawer sides (9, 10) to the drawer back panel (11) using eight screws (H) (4x30mm) in total (four per side). Slide the drawer bottom panel (12) into the grooves. Attach drawer support rails (13) to the underside of the drawer sides (9, 10) using screws (F) (15x10mm). Attach the drawer front (8) to the drawer box. Attach drawer handles (I) to the drawer front (8) using screws (J) (4x16mm).
Step 6: Install Drawer
Attach drawer runners (L) to the drawer sides (9). Insert the assembled drawer into the console, aligning the runners.
Step 7: Wall Mounting (Optional)
For safety and stability, it is recommended to secure the console to a wall. Locate a suitable wall stud. Drill a pilot hole into the stud. Use the wall anchor screw (M) to attach the console to the wall.
Contact Information
US office: Fontana
UK office: Ipswich
AU office: Truganina
DE office: FDS GmbH, Neuer Höltigbaum 36, 22143 Hamburg, Deutschland
FR office: Saint Vigor d'Ymonville
PL office: Gdańsk
