Contact Information
For assistance, please contact our customer team:
- USA: cs.us@costway.com
- Australia: cs.au@costway.com
- United Kingdom: cs.uk@costway.com
- Italy: cs.it@costway.com
- Poland: sklep@costway.com
- Germany: cs.de@costway.com
- France: cs.fr@costway.com
- Spain: cs.es@costway.com
Before You Start
Please read all instructions carefully and retain them for future reference. Separate and count all parts and hardware. Read through each step carefully and follow the proper order. It is recommended to assemble all items near their intended use area to avoid unnecessary movement once assembled. Always place the product on a flat, steady, and stable surface. Keep all small parts and packaging materials away from babies and children, as they pose a serious choking hazard.
Parts List
Identify and count all parts before assembly:
- Part A: Frame pieces (x2)
- Part B: Tabletop support bar (x1)
- Part C: Tabletop panels (x2)
- Part D: Support structure (x1)
Assembly Instructions
Step 1
Align the card slot first, then push to the left to tighten. This involves connecting various frame and support pieces (Parts 1-9, including screws M6*20, M6*38, M6*35). Ensure parts are correctly aligned before tightening.
- Part 1: Long metal rod (x2)
- Part 2: Short metal rod (x2)
- Part 3: Metal support piece (x2)
- Part 4: Metal support piece (x2)
- Part 5: Metal frame piece (x2)
- Part 6: Metal frame piece (x2)
- Part 7: Screw M6*20 (x12)
- Part 8: Screw M6*38 (x4)
- Part 9: Screw M6*35 (x4)
Diagram A: Shows alignment and tightening of slots.
Diagram B: Shows alignment and tightening of slots.
Step 2
Align the slot and clamp it into the feet tube. Do not tighten fully until clamped into the feet tube. This step involves connecting support tubes to the frame. Ensure the point indicated in the diagram faces the direction of the panel frame during installation.
Step 3
Attach frame pieces (Parts 6 and 7) to the back of the panel. Do not tighten until clamped into the feet tube.
Step 4
After the wheel gets stuck, lock the screw to stop it from coming loose. This involves using screws (Parts 8 and 9).
Step 5
Complete the assembly by securing the final components, using Part 7 screws.
Step 6
Put on the umbrella hole cover (Part D).
Return / Damage Claim Instructions
Important: DO NOT discard the box or original packaging. If a return is required, the item must be returned in its original box; otherwise, the return will not be accepted.
To file a claim:
- Take a photo of the box markings (text) on the side of the box. This helps identify your product number for correct parts.
- Take a photo of the damaged part(s), if applicable. A photo of the damage is required for processing your replacement or refund quickly. Ensure you have the original box, even if damaged.
- Send an email with the requested images and a description of your claim directly from the marketplace where the item was purchased.
