VEVOR TV Stand with Mount
Model No.: C240415S-01
TOUGH TOOLS, HALF PRICE
Technical Support and E-Warranty Certificate: www.vevor.com/support
Introduction
VEVOR is committed to providing tools with competitive prices. Phrases like "Save Half" or "Half Price" represent an estimate of potential savings compared to major brands and do not necessarily cover all product categories. Customers are advised to verify savings carefully when placing an order.
Product Overview
This document is the user manual for the VEVOR TV Stand with Mount, Model No. C240415S-01. The product is a TV stand designed to hold a television and its associated components, featuring a mount for the display.
Diagram Description: An illustration shows the assembled TV stand with a central pole structure supporting a TV mount, and shelves below for media devices.
Contact Information
Need Help? Contact Us!
For product questions or technical support, please contact VEVOR:
Technical Support and E-Warranty Certificate: www.vevor.com/support
This is the original instruction manual. Please read all instructions carefully before operating. VEVOR reserves the right to interpret the user manual. Product appearance is subject to the received item. VEVOR will not provide further notice for technology or software updates.
Important Safety Information
WARNING:
Please read this manual carefully before using the product. Failure to do so may result in serious injury. ⚠️
Please read and observe carefully all the assembly instructions before beginning assembly. ??? Unit should be assembled by two or more people.
?? Please do not let your child climb on the product. If you have kids or animals who like to climb, we highly recommend using the wall anchors and brackets/straps that come with the package.
ASSEMBLY PRECAUTIONS
- Assemble only according to these instructions. Improper assembly can create hazards.
- Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
- Keep the assembly area clean and well-lit.
- Keep bystanders out of the area during assembly.
- Do not assemble when tired or when under the influence of alcohol, drugs or medication.
- The product capabilities apply to properly and completely assembled products only.
- Assemble on a flat, level, hard and smooth surface capable of safely supporting the TV STAND WITH MOUNT.
- For additional information regarding the parts, please refer to the Assembly Diagram. Unwrap and separate all parts in a clean work area.
SAVE THESE INSTRUCTIONS
USE PRECAUTIONS
TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING:
- This product is not a toy. Do not allow children to play with or near this item.
- Do not exceed weight capacities before moving.
- Use only on a flat, hard and smooth surface capable of safely supporting a fully loaded TV STAND WITH MOUNT.
- Use as intended only.
- Inspect before every use; do not use if parts are loose or damaged.
Technical Specifications
| Attribute | Value |
|---|---|
| Model | C240415S-01 |
| Rating(s) | 12A 125Vac 60Hz 1500W |
| Product Dimensions (LxWxH)(mm) | 1200*355*510 |
| Net Weight(kg) | About 20.1 |
*Products such as specifications, appearance, and design are subject to modification without prior notice.
Package Contents
Installation of Cams and Pins
Screw the pin into the hole. To set the cams correctly, ensure that the arrow on the cam is pointing to the hole of the pin and lock it. Lock the cam by turning the cam head with a screwdriver until it is tightened. Please do not use an electric screwdriver to assemble the unit.
Diagram Description: A sequence of three images showing the insertion of a pin into a hole, followed by the insertion of a cam and its rotation to lock. The final image shows the cam securely locked with no gap. ✔️
Read each step carefully before starting. It is very important that each step of instruction is performed in the correct order. If these steps are not followed in sequence, assembly difficulties will occur.
Parts and Hardware List
Main Components:
- Part 1: Mesh Shelf (1 pc)
- Part 2: Mesh Shelf (1 pc)
- Part 3: Support Bracket (1 pc)
- Part 4: Side Frame (2 pcs)
- Part 5: Horizontal Support Bar (4 pcs)
- Part 6: Horizontal Support Bar (4 pcs)
- Part 7: Vertical Support Pole (Left) (1 pc)
- Part 8: Vertical Support Pole (Right) (1 pc)
- Part 9: Top Panel (1 pc)
- Part 10: Middle Panel (1 pc)
- Part 11: Middle Panel with cutout (1 pc)
- Part 12: Bottom Panel (1 pc)
- Part 13: Front Trim Piece (4 pcs)
- Part 14: Cable Management Bracket (1 pc)
- Part 15: TV Mount Arms (2 pcs)
Hardware:
- Screw B (M7x50mm): 12 pcs
- Screw F (M6x16mm): 24 pcs
- Screw H (M6x30mm): 18 pcs
- Screw L (M6x40mm): 2 pcs
- Screw C (M6x16mm): 22 pcs
- Bracket L: 2 pcs
- Screw M (M6x16mm): 4 pcs
- Part P (Cam Lock): 1 pc
- Screw C (M3.5*12): 2 pcs
- Part R (Cable Tie): 1 set
- Part S (Washer): 6 pcs
- Part T (Screw): 2 pcs
- Part U (Bracket): 1 pc
- Part V (Washer): 2 pcs
- Screw M (Ø6x30mm): 6 pcs
- Part X (Screw): 2 pcs
- Part Y (Screw): 6 pcs
- Part Z (Allen Wrench): 1 set
- Screwdriver (tool)
- Wrench (tool)
- Allen Wrench (tool)
Assembly Steps
Step 1: Assemble Side Frames
Attach Part 3 (Support Bracket) to Part 7 (Vertical Support Pole - Left) and Part 8 (Vertical Support Pole - Right) using Part Y screws (x6). Attach Part 4 (Side Frame) to the bottom of Part 7 and Part 8 using Part Y screws. Ensure the structure is stable.
Step 2: Connect Base Shelves and Vertical Poles
Attach Part 1 (Mesh Shelf) and Part 2 (Mesh Shelf) to the assembled side frames. Connect Part 5 (Horizontal Support Bars) and Part 6 (Horizontal Support Bars) between the vertical poles. Use Part T (x2), Part X (x2), and Part O (x20) for connections. Ensure the parts align correctly.
Step 3: Attach Front Trim and Panels
Attach Part 13 (Front Trim Pieces) to the front of the unit using Part B screws (x6) and Part W (x2). Connect Part 1 (Mesh Shelf) and Part 2 (Mesh Shelf) to the frame. Use Part B screws (x6) for securing the shelves.
Step 4: Install Top and Middle Panels
Place Part 9 (Top Panel), Part 10 (Middle Panel), Part 11 (Middle Panel with cutout), and Part 12 (Bottom Panel) onto the structure. Secure them using Part W screws (x4) and Part B screws.
Step 5: Secure Panels and Attach Support Bars
Attach Part 13 (Front Trim Pieces) to the front of the assembled panels using Part B screws (x6) and Part F screws (x10). Attach Part 6 (Horizontal Support Bars) to the sides of the unit using Part F screws.
Step 6: Install Cable Management and Brackets
Follow instructions for using light strips (if applicable). The buckle serves as a fixing effect. Attach Part S (Washers) and use Part Z (Allen Wrench) and Part P (Cam Lock) with Part Q screws (x2) to secure components. Attach Part 13 (Front Trim Pieces) to panels 9, 10, 11, and 12 using Part S washers and Part Q screws.
Step 7: Assemble Vertical Mount Structure
Connect Part 5 (Horizontal Support Bars) to Part 7 (Vertical Support Pole - Left) and Part 8 (Vertical Support Pole - Right) using Part H screws (x2). Ensure the poles are aligned and secured.
Step 8: Attach Mount Structure to Stand
Attach the assembled vertical mount structure (from Step 7) to the TV stand base. Use Part H screws (x12) to secure the vertical poles to the stand frame, shelves (Part 1, 2, 11, 12), and support bars (Part 5, 6).
Step 9: Install Top and Middle Panels onto Mount Structure
Place Part 9 (Top Panel) and Part 10 (Middle Panel) onto the stand. Secure them to the vertical mount structure using Part F screws (x14).
Step 10: Route Cables and Attach Mount Arms
Route the power cable through the designated channel. Attach the main vertical pole assembly (Part 1) to the stand. Use Part I (x2) screws.
Step 11: Attach TV Mounting Brackets
Assemble the TV mounting bracket components. Attach Part 12 (TV mounting plate) to the vertical pole. Use Part O (x2) screws and Part M (x4) washers. Attach bracket pieces L (x2) with Part M (x2) screws and Part V (x2) washers. Use Part O (x2) screws and Part M (x4) washers.
Step 12: Mount TV Bracket to Stand
Attach the assembled TV bracket (Part 12) to the vertical pole on the stand. Use Part H screws (x4) to secure it.
Step 13: Secure and Organize Cables
Tie the wires with black strips (Part R, x1 set). Attach Part 15 (TV Mount Arms) to the main bracket.
Step 14: Final Check and Rotation
The bracket can rotate 40 degrees to both the left and right sides. Ensure all connections are secure.
Completion
The TV Stand with Mount is now assembled.
Diagram Description: An illustration of the fully assembled TV Stand with Mount.
FCC Information
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment!
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This product may cause harmful interference.
- This product must accept any interference received, including interference that may cause undesired operation.
WARNING: Changes or modifications to this product not expressly approved by the party responsible for compliance could void the user's authority to operate the product.
Note: This product has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This product generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be determined by turning the product off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the distance between the product and receiver.
- Connect the product to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for assistance.
Manufacturer and Importer Information
Manufacturer: Shanghaimuxinmuyeyouxiangongsi
Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.
Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia
Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730
Contact Us â Official VEVOR Support
