Assembly Steps
Step 4: Attach TV Frame to Lifting Column
This step involves connecting the TV frame to the lifting column. Referencing the diagrammatic representation (labeled 7 and 8), the TV frame (7) is secured to the lifting column (8).Parts required: 2 pieces of M8x25 bolts.
Step 5: Mount TV Bracket and Hang TV
This step focuses on attaching the TV to the lifting mechanism. First, install the vertical TV bracket onto the back of the television.Parts required: 4 pieces of M6x10 bolts. This bracket is designed for TV sizes ranging from 32 to 70 inches. Once the bracket is affixed to the TV, the television is then hung onto the upright column via the installed bracket.
Diagrammatic Overview and Component Reference
The assembly diagram illustrates the overall process and identifies key components:
- Component 1: Represents the main lifting column mechanism.
- Components 2, 3, 4, 5, 12: These are parts of the TV bracket assembly that attach to the television.
- Component 6: Likely the remote control or a power switch for the lift.
- Component 7: The TV frame that connects to the lifting column.
- Component 8: The base or lower part of the lifting column.
- Component 9: Depicts the individual TV bracket parts, including the vertical mounting arms.
- Component 10: Represents the television itself, shown mounted on the lift.
- Component 11: Indicates an electrical connection point for the lift system.
The diagrams visually guide the user through:
- Diagrams 7 & 8: Showing the attachment of the TV frame (7) to the lifting column (8) using M8x25 bolts.
- Diagrams showing 9: Illustrating the TV bracket components.
- Diagrams showing 10: Depicting the TV (10) mounted onto the lifting column.
