VEVOR TELEVISION STAND

Introduction & Support

VEVOR is committed to providing tools with competitive prices. Phrases like "Save Half" or "Half Price" represent an estimate of potential savings compared to major top brands and do not cover all product categories. Please verify savings carefully when placing an order.

Need Help? Contact Us!

For product questions or technical support, please contact: CustomerService@vevor.com

This is the original instruction manual. Please read all instructions carefully before operating. VEVOR reserves the right to interpret this user manual. The product's appearance is subject to the item received. VEVOR will not provide separate notification for technology or software updates.

Safety Information

⚠️ Warning: To reduce the risk of injury, the user must read the instructions manual carefully.

⚠️ Warning: Do not exceed the rated listed weight. Serious injury or property damage may occur!

SAVE THIS MANUAL

Specifications

Parts List

Main Components:

• Part 1: Base Frame Component (x1)
• Part 2: Base Support Bars (x2)
• Part 3: Vertical Support Poles (x2)
• Part 4: Shelf Support Arms (x2)
• Part 5: TV Mounting Brackets (x2)
• Part 6: Shelves (x2)
• Part 7: Shelf Brackets (x4)
• Part 8: Shelf Support Connectors (x4)
• Part 9: Vertical Pole Connectors (x4)
• Part 10: TV Mounting Bar (x1)
• Part 11: Casters (Wheels) (x4)

Hardware:

• A: M8x55 Bolt (x4)
• B: M8 Bolt (x4)
• C: M8x25 Bolt (x2)
• D: M8*22*2 Bolt (x2)
• E: M6x30 Bolt (x2)
• F: M6x12 Screw (x12)
• G: M5x10 Screw (x8)
• H: M6x60 Bolt (x4)
• I: M6x16*1.5 Bolt (x4)
• J: M6 Nut (x4)
• K: M5x55 Bolt (x8)
• L: M5x30 Bolt (x2)
• M: Wrench (x1)
• N: M4x16 Screw (x4)

Washers:

• Plastic Washer
• Steel Washer

Hardware for TV Installation:

• TV1: M4*30 Screw (x4)
• TV2: M6*16 Screw (x4)
• TV3: M6*35 Screw (x4)
• TV4: M8x16 Screw (x4)
• TV5: M8x35 Screw (x4)
• TV6: M8x50 Screw (x4)
• TV7: Spacer with 3 holes (x8)
• TV8: Spacer SP1 (x4)
• TV9: Spacer SP2 (x4)
• TV10: Spacer SP3 (x4)

Assembly Steps

Step 1: Assemble Base Frame

Connect the two base support bars (2) to the base frame component (1). Ensure the perforated side of the base frame component is the short side. Use screws A (M8x55) and B (M8) with washers. Attach the four casters (11) to the base frame component using screws A (M8x55) and B (M8). Use the wrench (M) for tightening.

Step 2: Attach Vertical Poles

Attach the vertical support poles (3) to the assembled base. Use screws C (M8x25), D (M8*22*2), and E (M6x30) with washers. Connect the shelf support arms (4) to the vertical poles using screws F (M6x12) and the wrench (M).

Step 3: Install Shelves

Attach the shelf support connectors (8) and vertical pole connectors (9) to the vertical poles. Slide the shelves (6) onto the shelf support arms (4) and secure them using shelf brackets (7) and screws G (M5x10). Use screws K (M5x55) and F (M6x12) to attach the shelf support connectors (8) and vertical pole connectors (9).

Step 4: Attach TV Mounting Bar

Attach the TV mounting bar (10) to the top of the vertical poles. Use bolts H (M6x60) and I (M6x16*1.5) with washers and nuts J (M6). Use the wrench (M) for tightening.

Step 5: Prepare for TV Mounting

Measure the width (X) and height (Y) of the TV's fixing holes (VESA pattern). The stand supports VESA patterns up to 600x400mm.

Important: If the width (X) is greater than 600mm or the height (Y) is greater than 400mm, STOP installation and contact customer support.

You are provided with screws of diameters M4, M6, and M8, along with spacers (TV7, TV8, TV9, TV10). Select the appropriate screws and spacers based on your TV's back type:

• For TVs with irregular/obstructed back: Use Spacers (SP1, SP2, SP3) and the appropriate screws (TV1-TV10).
• For TVs with flat/unobstructed back: Use the appropriate screws (TV1-TV6) directly or with spacers (TV7).

Warning: Ensure the correct screw and spacer combination is used for secure mounting. Diagrams show examples of correct and incorrect screw insertion.

Step 6: Attach Bracket to TV

Select the correct screw, reducer, and spacer combinations for your TV's VESA pattern (M4, M6, M8). Attach the TV mounting bracket arms (5) to the back of your TV. The manual shows specific combinations for different VESA sizes (TV1-TV2 for M4, TV3-TV4 for M6, TV5-TV6 for M8) and spacer types (TV7, TV8-10).

Step 7: Mount TV onto Stand

Carefully lift the TV and hook the attached bracket arms onto the TV mounting bar (10) on the stand. Secure the TV using screws L (M5x30) and N (M4x16) to prevent the TV from slipping off. Ensure the TV is stable before releasing.

Manufacturer & Importer Information

Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609sh, Shanghai

Imported to USA by: VEVOR STORE INC, 9448 RINCHMOND PL #E, RANCHO CUCAMONGA, California, 91730, United States of America

Made In: China