Signature Design by Ashley D594-35 Dining Table Assembly Instructions
Model Number: D594-35
Important Safety Notice
Always use proper tools. Follow assembly steps in order. Check packing materials for loose parts. Contact retailer for missing parts; do not use substitute parts. Periodically check connectors. Keep instructions for future reference. Handle glass or mirrors with extreme care. Unplug electrical cords before assembly and be careful not to twist them. Do not stand on lower shelves when assembling upper shelves; use a step ladder. Do not stand on tables. If assembly requires two or more people, do not attempt alone.
Disclaimer: Ashley Furniture Industries, LLC is not liable for damages or injuries due to failure to follow assembly instructions, improper assembly, or improper product use.
Note: Your unit may look different from the illustrations on this instruction sheet.
Advertencia de Seguridad Importante
Siempre use las herramientas apropiadas. Siga los pasos de ensamble en orden. No salte ningún paso. Revise los materiales de embalaje. Si faltan partes, comuníquese con el surtidor. NO USE PARTES SUSTITUTAS. Revise los conectores periódicamente. Guarde las instrucciones. Tenga cuidado al manejar vidrio o espejos. Asegúrese de que el cable eléctrico esté desenchufado antes de armar y no lo doble. No se pare en repisas inferiores para armar repisas superiores; use una escalera. No se pare en las mesas. Si se requieren dos o más personas, no intente armarlo solo.
Nota: Las Industrias de Muebles Ashley, LLC no se hace responsable por daños o lesiones que puedan ocurrir por no seguir las instrucciones de ensamblaje correctamente, el ensamble apropiado del producto, o el uso apropiado del mismo.
Nota: La unidad puede presentar una apariencia diferente de la que se muestra en las ilustraciones.
Remarque Importante Concernant la Sécurité
Utilisez toujours les outils adaptés. Suivez l'ordre des étapes de montage. N'en sautez aucune. Vérifiez les matériaux d'emballage. Si des pièces manquent, contactez votre revendeur. N'UTILISEZ PAS DE PIÈCES DE SUBSTITUTION. Vérifiez périodiquement les connecteurs. Gardez ces instructions. Manipulez le verre ou les miroirs avec une extrême prudence. Assurez-vous que le câble électrique est débranché avant le montage et ne le tordez pas. Ne vous tenez pas sur les étagères inférieures pour installer les étagères supérieures; utilisez un escabeau. Ne vous tenez pas sur les tables. Si le montage nécessite deux personnes ou plus, n'essayez pas de le monter seul.
Remarque: Ashley Furniture Industries, LLC ne peut être tenu responsable des dommages ou blessures dus au non-respect des instructions de montage et d'utilisation du produit.
Remarque: Votre meuble peut être différent de celui montré sur l'illustration.
重要安全提示
请使用合适的工具。按照组装步骤逐步完成,请勿跳过任一步骤。仔细检查包装材料。如若发现部件丢失,请联系当地零售商。请勿用其它零部件替代。定期检查所有连接处。妥善保存该安装说明。安装玻璃和镜子时请小心。安装前确保电源断开,安装过程中请勿扭曲电线。安装隔板或电视柜时,请勿站在低层隔板上安装上层隔板,使用梯子。请勿站立在桌子上。如果组装需要两人或多人,请不要尝试独自安装。
注意: 对于未能严格按照组装说明书组装、未能正确组装产品或未能正确使用产品而造成的损失或伤害,Ashley Furniture Industries, LLC概不负责。
注意: 您所购买的产品与该组装说明书中配图在外观上可能会有差异。
Parts List
| Identifier | Description | Quantity |
|---|---|---|
| A | Table Top | 1 |
| B | Leg | 4 |
| C | Bolt (5/16" x 60mm) | 8 |
| D | Allen Wrench | 1 |
Assembly Instructions
Step 1: Prepare the Table Top
Place the table top (A) upside down on a clean, protected surface. Ensure the hardware pack is accessible.
Step 2: Attach the Legs
Note: Unit should be assembled by two or more people. Do not tighten any bolts until all bolts have been started.
Align each leg (B) with the pre-drilled holes on the underside of the table top (A). Insert bolts (C) through the leg brackets and into the table top. Use the Allen wrench (D) to start threading the bolts. Repeat for all four legs. Once all bolts are started, tighten them securely.
Step 3: Adding the Leaf (Optional)
Follow the instructions to add the leaf to the table if desired.
Illustration Description: The diagram shows how to insert the leaf into the table mechanism. One part of the table slides out, the leaf is placed in the gap, and then the table parts are slid back together.
Step 4: Extending the Table
Illustration Description: The diagram shows the table being extended by sliding the two halves apart.
Step 5: Inserting the Leaf
Illustration Description: The diagram shows the leaf being slid into the extended table mechanism.
Step 6: Securing the Leaf
Illustration Description: The diagram shows the leaf being secured in place within the table mechanism.
Step 7: Aligning the Table Halves
Illustration Description: The diagram shows the two halves of the table being brought together, with close-ups illustrating how the leaf fits into the center.
Step 8: Final Extension
Illustration Description: The diagram shows the fully extended table.
Step 9: Securing the Table Top
Illustration Description: The diagram shows a close-up of the mechanism used to secure the leaf in place, with arrows indicating the direction of insertion and locking.
Replacement Parts & Support
For replacement parts, contact:
- Email: RTAParts@ashleyfurniture.com
- Website: www.ashleyfurniture.parts
Customer Service Phone: 1-844-966-0809
