MANUAL For Toyota PRIUS 2012 / C7204

TOOLS REQUIRED FOR DISASSEMBLY

• 1. Wire
• 2. Mounting bracket
• 3. Installation tools

Illustration showing three steps for required tools: 1. A pry bar. 2. A mounting bracket. 3. Installation tools.

Disassembly

1. Use a pry bar to pry open the base of the gear shift lever, then pry open the center console decorative trim and remove it.

   Step 1: A sequence of images demonstrating prying open the gear shift lever base and removing the center console decorative trim.

2. Pry open the outer frame of the radio, disconnect the connecting wires, then pry open the ignition key panel, and then unscrew the four screws on both sides of the radio.

   Step 2: A sequence of images showing how to pry open the radio's outer frame, disconnect wires, open the ignition key panel, and unscrew the radio.

3. Take out the car radio, unplug the wires connected to the original vehicle, and remove the radio.

   Step 3: A sequence of images illustrating the removal of the car radio, unplugging wires from the original vehicle.

PROPOSE

Before starting the replacement job, you should prepare tools such as a plastic pry tool and a screwdriver, and make sure the car's power is cut off during the installation.

Installation

(If the wiring harness does not match, please contact customer service to request the correct wiring harness)

1. Secure the new radio onto the car frame using the mounting bracket, tighten the screws on both sides, then connect the wires from the radio to the original vehicle's wires. Reattach the radio to the center console, tighten the four screws on both sides, and reinstall the ignition key panel.

   Step 1: A sequence of images depicting securing the new radio with a mounting bracket, connecting wires, reattaching the radio to the console, tightening screws, and reinstalling the ignition key panel.

2. Reinstall the center console decorative trim around the radio, then put back the base of the gear shift lever. The installation of the new radio is complete.

   Step 2: A sequence of images showing the reinstallation of the center console decorative trim and the gear shift lever base.

COMPARATION

Effect of Installation

Comparison of the original car radio interface (left) versus the new touchscreen interface (right), highlighting the improved user experience.

GENTLE REMINDERS

Due to the complexity of the product structure, you may encounter some problems during installation. If you still have any questions about the installation after reading this manual, you can contact usand we will respond to you within 24 hours. Don't worry; we will do our best to solve the problem for you until you are satisfied.

After-sales email:cheyang728@gmail.com

WARN FCC WARNING

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference that may cause undesired operation