Android Car Media Player Instructions

Content

• Tips and Warnings
• Important Tips
• Test
• Installation
• Wiring
• Icon Introduction
• Main functions and usage
• Parameters

Tips and Warnings ?

In order to emphasize the important information of the user manual, special attention should be paid when seeing the label ⚠️, which indicates some important warnings and reminders.

Important Tips

Please read all instructions before installation. It is recommended that the machine be installed by a car audio professional.

• ⚠️ This machine is suitable for vehicle 12V power supply system (grounding wire is required). Please do not install this machine in a 24V vehicle, otherwise it will damage the machine.
• ? Do not repair the power fuse without professional guidance. Improper use of the fuse can cause damage to the machine or cause a fire.
• ? To avoid violating traffic rules, drivers cannot watch videos while driving and operating machines to avoid unnecessary accidents.
• ⛑️ For the sake of safety and to ensure the normal use of the product, please invite professionals to install, disassemble, or repair the machine to avoid machine damage and accidents.
• ? Please avoid placing this product in a humid environment and water to avoid fire due to electric shock or other unnecessary damage.

Note: To prevent burning out the machine, please do not energize until you have connected the power cord correctly!

Test

A quick simple test before the installation is to confirm that the device is working normally and as expected. In case there is a wrong step in the subsequent installation, which causes it to fail to work. If you perform a successful test but the unit did not work after installing it, please recheck the installation steps.

Test car stereo:

1. The red and yellow wires of the car stereo combine together first and then connected to the positive pole of the 12V battery.
2. The black wire is connected to the negative pole of the battery.
3. 2 seconds later, check the car stereo. If the screen is lighting up, it means the car stereo is proper functioning.

Installation

There are three ways to install the machine:

1. Screw fixed installation
2. Card position fixed installation
3. Special frame fixed installation

As shown in the figure above, please choose one of them according to the actual situation. Of course, you can also re-install the new radio according to the installation method of the original car radio.

Wiring

(Note: The picture is for reference only, please refer to the actual product!)

1. Harness

Wiring Diagram:

Front Panel Connections:

• KEY-1
• BACK
• ACC
• GND
• B+
• ILL
• KEY-2
• ANT.POWER

Rear Panel Connections:

• FR-
• FR+
• FL-
• FL+
• RR-
• RR+
• RL+
• RL-

2. Back interface diagram

The back of the unit features the following ports:

• 8pin BREAK1
• BACK_CVBSIFI/BT
• RCA Input/Output
• Power Cable
• 2USB Cable
• Camera Input
• Radio antenna
• GPS Antenna

3. Rear view camera wiring (Optional)

Components:

• 1. Monitor (Not Included in the Package)
• 2. Camera Power Source
• 3. Camera (Optional)

Connection:

• Video Cable (26ft): Connects to the monitor's video input.
• Reversing trigger line: Connect this wire to the reversing line in the power harness (e.g., Back (A6)).
• Camera Power Cable:
• Red: Connect to the positive pole of the Reverse light Cable.
• Black: Connect to GND (Back to GND).

Monitor Specifications:

• 1. NTSC FORMAT
• 2. PAL/NTSC Auto Switch Light

Note: Whether you are using a rear view camera or not, please connect the rear view wire. Otherwise, your WiFi and Bluetooth signals will suffer!

Icon Introduction

1. Machine-Host

2. On Screen - Main Interface

(Note: The main interface is different for different products, please refer to the specific product)

3. On screen - Drop-down list

4. On screen - APP Icon

(★ It only means that there is this APP in the product, if you need to use it, you need to purchase additional accessories!)

Main functions and usage

1. Hi-Fi function

Hi-Fi function, high-fidelity sound quality, perfect playback of the original sound field, can perfectly reproduce the sound of music or video, without distortion, bringing you the most authentic sound. Hi-Fi function brings you an immersive experience.

Click to enter Sound Effects, you can adjust and set the sound effects. Click HiFi, the font turns red, indicating that the HiFi function is being used; click HiFi again, the font turns gray, indicating that the HiFi function is turned off.

[Image description: Screenshot of the Hi-Fi function interface showing equalizer settings with options like Rock, Classical, Jazz, Pop, and Hi-Fi.]

2. Wireless & Wired Carplay/Android Auto—Zlink

Carplay Connection Considerations

1. Carplay function only supports Apple mobile phone connection.
2. The data cable used for Carplay connection must be the original iPhone data cable.

Android Auto Connection Considerations

1. The Android Auto function can only support the connection of Android phones, and the Huawei version of the phone does not support the connection.
2. Your Android phone needs to support Google services and install Andriod Auto software.

2.1 Carplay Wireless Connection

[Image description: A series of screenshots demonstrating the wireless Carplay connection process, including Bluetooth pairing, device connection, and confirmation messages.]

2.2 Android auto wireless connection

[Image description: A series of screenshots demonstrating the wireless Android Auto connection process, similar to the Carplay connection steps.]

2.3 Carplay wired connection method

Connect the mobile phone with the car player through the original data cable.

[Image description: A diagram showing a mobile phone connected to the car stereo via a USB cable, with the car stereo interface displaying 'Connection succeeded'.]

2.4 Android auto wired connection method

Connect the mobile phone with the car player through the original data cable. (Note: Please use 4pin USB cable to connect)

[Image description: A diagram showing a mobile phone connected to the car stereo via a USB cable, with the car stereo interface displaying 'Connection succeeded'.]

3. Offline Map—HERE WeGo

(Note: You can also use Google Maps online)

In order to use the offline feature of your device, follow the steps below to set it up:

1. Power on the device and connect the device to the internet via Wifi.
2. Find the APP named HERE WeGo in the main menu.
3. Follow the APP prompts to enter the main map page and find the options menu.
4. Click "Use the app offline" and download your favorite map data in the country list.

[Image description: Screenshots showing the HERE WeGo app interface, including map display, search functionality, and download map options.]

4. Supported Additional Devices

(Note: Additional devices are not included in the product and accessories, you need to purchase additionally!)

Parameters