MANUAL

Tools Required for Disassembly

• Wires
• Install bracket
• Installation tools

Disassembly Steps

1. Use a pry bar to open the original vehicle frame on the outer side of the time display screen, then remove the time display screen.

   [Image Description: A hand using a pry bar to carefully detach the car's dashboard frame surrounding the central display screen.]

2. Loosen the two screws above the fixed air conditioning vent using a screwdriver, then remove the air conditioning vents on both sides.

   [Image Description: A hand using a screwdriver to unscrew mounting points above the air conditioning vents, followed by hands removing the vent assemblies.]

3. Unscrew the two screws on both sides of the fixed radio, then remove the radio and disconnect the wiring.

   [Image Description: Hands unscrewing screws securing the car radio unit, then carefully pulling the unit out and disconnecting its electrical wiring harnesses.]

Preparation (Propose)

Before starting the replacement job, prepare tools such as a plastic pry tool and a screwdriver. Ensure the car's power is cut off during the installation process.

Installation Steps

(If the wiring harness does not match, please contact customer service to request the correct wiring harness)

1. Pry open the buckle and remove the two air conditioning vents separately from the original vehicle frame. Align the buckle and install the two air conditioning vents onto the new radio frame, then plug the new radio into the original vehicle wiring.

   [Image Description: Hands prying open retaining clips, removing existing air conditioning vents, then attaching these vents to the new radio's frame and connecting the new radio to the vehicle's wiring.]

2. Install the new radio and secure the buckle on both sides of the time display screen. Reinstall the original vehicle frame, ensuring that the upper two buckles on the radio frame are positioned beneath the original vehicle frame. The installation of the new radio is complete.

   [Image Description: Hands fitting the new radio into the dashboard, securing it with clips on the display screen frame, and carefully reassembling the original dashboard trim pieces.]

Comparison

Effect of Installation

[Image Description: A side-by-side comparison showing the original car interior dashboard with its standard radio unit on the left, and the upgraded interior with the new, larger touchscreen infotainment system installed on the right, highlighting the visual enhancement.]

Gentle Reminders

Due to the complexity of the product structure, you may encounter some problems during installation. If you still have any questions after reading this manual, you can contact us. We will respond to you within 24 hours and do our best to solve the problem until you are satisfied.

After-sales email: cheyang728@gmail.com

WARN FCC WARNING

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.