NYMÅNE LED Ceiling Lamp

Important Safety and Installation Information

CAUTION:

Before starting, turn off power at the main circuit panel.

CAUTION!

The light source of this product is non-changeable light diodes (LED). Do not disassemble the product, as the light diodes can cause damage to the eyes. Do not immerse in water.

Cleaning:

Use a damp cloth, never a strong cleaning agent.

WARNING:

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Assembly Instructions

Follow these steps for proper installation. Ensure power is disconnected.

Step 1: Attach Mounting Brackets

Secure the two provided mounting brackets to the designated points on the underside of the lamp base. The diagrams show a rotational motion to lock them in place.

Step 2: Position and Secure Lamp Base

Place the lamp base in its final position and secure it. An upward arrow indicates the direction of placement.

Step 3: Electrical Wiring

Connect the electrical wires. The diagrams show the main wiring points and close-ups of how to insert and secure wires into connectors. Typically, this involves connecting the mains supply wires to the lamp's internal wiring.

Step 4: Wire Connection Detail

Detailed view of wire connections, showing the insertion of stripped wire ends into appropriate connectors. Ensure a secure connection.

Step 5: Mount Lamp to Ceiling

Mount the lamp assembly to the ceiling. An upward arrow indicates lifting the lamp into its final position.

Step 6: Attach Lamp Cover

Align the lamp cover with the main body. The diagrams show hands guiding the cover into place, with arrows indicating a twisting or clipping action. This is shown for two points.

Step 7: Secure Lamp Cover

Engage the clips to secure the lamp cover. Close-up views show the clips snapping into place, indicated by a "Click!" sound. This is repeated for multiple attachment points (e.g., 3x).

Component Identification

The product includes the main lamp body. A hook symbol ([S-hook]) is also shown, which may be used for temporary support during installation.