IKEA NYMÅNE 3-Spot Ceiling Lamp
Important Safety Information
WARNING! Always shut off power to the circuit before starting installation work. In some countries, electrical installation work may only be carried out by an authorized electrical contractor. Contact your local electricity authority for advice.
Different materials require different types of fittings. Always choose screws and plugs that are specially suited to the material.
Assembly Steps
- Prepare for Installation: Ensure the power to the circuit is turned off. Gather necessary tools, which may include a screwdriver and a knife.
- Mounting Bracket: Attach the mounting bracket to the ceiling using appropriate screws and wall plugs suitable for your ceiling material. The diagram shows the bracket being secured with screws.
- Wiring: Connect the wires from the ceiling to the lamp's internal wiring. Ensure correct connections are made to the terminals, typically marked L (Live) and N (Neutral).
- Connecting Wires: Insert the wires into the designated connection points. Push the wires firmly until they are securely seated.
- Securing Wires: Ensure all connected wires are properly secured within the lamp's housing.
- Final Connections: Connect the remaining wires, ensuring a secure fit. The diagram shows wires being inserted into terminals.
- Securing the Lamp: Carefully place the lamp onto the mounting bracket and secure it.
- Bulb Installation: When changing the bulb, use only GU10 LED bulbs. Do not use GU10 Halogen bulbs.
Bulb Replacement Guidance
When changing the bulb, use only GU10 LED bulbs. Do not use GU10 Halogen bulbs.
