NORDVIKEN Chair

Parts List

Assembly Steps

1. Step 1

   Attach the side frame pieces to the seat support using four 122620 wooden dowels.

   [Diagram: Shows two side frame pieces being connected to a central seat support using dowels.]

2. Step 2

   Insert two 101357 wooden dowels into the top of each side frame. Insert two 101350 wooden dowels into the backrest supports.

   [Diagram: Shows dowels being inserted into the top of the side frames and the backrest supports.]

3. Step 3

   Attach the backrest slats to the side frames using sixteen 101350 wooden dowels and the provided Allen key (10083377). Ensure the dowels are inserted correctly.

   [Diagram: Shows backrest slats being attached to the assembled frame with dowels and the Allen key.]

4. Step 4

   Carefully turn the chair upside down onto a soft surface to avoid scratches.

   [Diagram: Shows the chair being flipped over.]

5. Step 5

   Secure the seat base. Use four 128758 screws and four 10042205 screws with the Allen key (10083377). Ensure the screws are tightened properly but do not overtighten.

   [Diagram: Shows the seat base being attached with screws.]

6. Step 6

   Attach the remaining backrest supports using two 10042205 screws and the Allen key (10083377).

   [Diagram: Shows the final backrest supports being attached with screws.]

7. Step 7

   Turn the chair upright.

   [Diagram: Shows the chair being turned upright.]

8. Step 8

   Secure the seat cushion supports using four 122925 screws. Ensure they are firmly attached.

   [Diagram: Shows the seat cushion supports being screwed into place.]

Assembly is now complete. Enjoy your NORDVIKEN chair!