SKOGSTA Chair Assembly Instructions
Brand: IKEA
Overview
This document provides step-by-step instructions for assembling the IKEA SKOGSTA chair. Please ensure you have all parts and tools before beginning.
Tools Required:
- Screwdriver ?
Parts Included:
- Screw (10093115): 2 pieces
- Screw (114575): 6 pieces
- Washer (100842): 6 pieces
- Connecting Piece (100514): 2 pieces
- Allen Key/Tool (10083377): 1 piece
Assembly Steps
Step 1: Prepare the Chair Seat
Place the chair seat upside down on a soft, protective surface, such as a cloth laid on a table. ⬇️
Step 2: Attach First Set of Legs
Identify the attachment points for the legs on the underside of the chair seat. Use Screw (114575) and Washer (100842) for each connection. Do not use Screw (10093115) for this step. Attach three screws per leg. ? shows a close-up of the screw and washer being inserted.
Step 3: Attach Second Set of Legs
Repeat Step 2 to attach the second set of legs to the chair seat, using three Screws (114575) and three Washers (100842) per leg.
Step 4: Install Connecting Pieces and Crossbars
Position the wooden crossbars between the legs. Insert Connecting Piece (100514) into the designated holes on the legs. Use Screw (10093115) to secure the crossbar to the connecting piece. The Allen Key/Tool (10083377) is used for tightening. ? shows a close-up of this connection.
Step 5: Final Tightening
Use the Allen Key/Tool (10083377) to securely tighten all six connections where the crossbars meet the legs. Ensure all screws and connecting pieces are firm. ? shows a close-up of the final tightening action.
