SKOGSTA Chair Assembly Instructions

Parts List

• Bolt (10093115): 2x
• Bolt (114575): 6x
• Washer (100842): 6x
• Nut (100514): 2x
• Allen Key (10083377): 1x

Included accessories: [screwdriver and screw], [assembly confusion], [IKEA store visit].

Assembly Steps

1. Step 1: Attach the seat to the chair frame using three bolts (114575) and three washers (100842). Ensure correct washer placement [✔️].

   Visual: Chair upside down on a table. A hand inserts a bolt and washer. Close-up shows correct [✔️] vs. incorrect [❌] washer placement.

2. Step 2: Repeat Step 1 for the remaining three attachment points.

   Use three more bolts (114575) and three washers (100842).

   Visual: Similar to Step 1.

3. Step 3: Connect crossbars between chair legs.

   Use two bolts (10093115) and two nuts (100514), tightening with the Allen key (10083377).

   Visual: Chair upside down. Hand inserts bolt through leg into crossbar, nut on other side, Allen key used.

4. Step 4: Secure the chair frame.

   Attach remaining frame components with six bolts (114575) and six washers (100842), using the Allen key (10083377). Ensure correct washer placement [✔️].

   Visual: Chair upside down. Hand uses Allen key to tighten bolts and washers. Close-up shows correct washer placement.