Costway JV11094 Nightstand Assembly Instructions
Product: Nightstand (Nachttisch, Table de Chevet, Mesilla de Noche, Comodino, Stolik nocny)
Model Number: JV11094
Before You Start
Please read all instructions carefully and retain them for future reference.
- Separate and count all parts and hardware before assembly.
- Read through each step carefully and follow the correct order.
- It is recommended to assemble the product near its final intended location to avoid unnecessary movement after assembly.
- Always place the product on a flat, steady, and stable surface.
- Keep all small parts and packaging materials away from babies and children, as they can pose a serious choking hazard.
Parts List
| Part Number | Description | Quantity |
|---|---|---|
| (1) | 8x30mm screw | x12 |
| (2) | 6x35mm screw | x14 |
| (3) | 15x12mm screw | x6 |
| (4) | 15x9.5mm screw | x8 |
| (5) | 3x12mm screw | x12 |
| (6) | 4x35mm screw | x26 |
| (7) | 4x16mm screw | x4 |
| (8) | 4x16mm screw | x2 |
| (9) | 4x10mm screw | x4 |
| (10) | 6x12mm screw | x16 |
| (11) | Screw | x1 |
| (12) | Screw | x4 |
| (13) | 4x12mm screw | x1 |
| (14) | Disc | x4 |
| (15) | 3x16mm screw | x4 |
Panels: A, B, C, D, E, F, G, H, I, J, K, L, M, N.
Assembly Instructions
- Step 1: Assemble the main structure. Attach panel D to panel B using fourteen (2) 6x35mm screws.
- Step 2: Attach panel C to panel B using twelve (5) 3x12mm screws and four (7) 4x16mm screws.
- Step 3: Attach panel G to panel A. Use two (1) 8x30mm screws, two (6) 4x35mm screws, and one (13) 4x12mm screw.
- Step 4: Attach panels F to the sides of the structure. Use twelve (6) 4x35mm screws, sixteen (10) 6x12mm screws, one (11) screw, and four (12) screws.
- Step 5: Attach panel C to panel A. Use three (1) 8x30mm screws and three (3) 15x12mm screws.
- Step 6: Attach panel B to panel C. Use three (1) 8x30mm screws and three (3) 15x12mm screws.
- Step 7: Attach internal support panels M, E, and N to the structure.
- Step 8: Attach panels C and D to the main structure. Use four (1) 8x30mm screws, four (6) 4x35mm screws, and four (14) discs.
- Step 9: Assemble the two drawer units. Connect panels H, I, J, K, and L. Secure each drawer with eight (4) 15x9.5mm screws, eight (6) 4x35mm screws, and two (8) 4x16mm screws.
- Step 10: Attach the drawer front to the assembled drawer box. Use four (15) 3x16mm screws per drawer.
- Step 11: Insert the assembled drawer units into the main body.
- Step 12: Attach the four legs to the bottom of the main body. Use four (9) 4x10mm screws per leg.
Return and Damage Claim Instructions
- Do not discard the original packaging. If a return is required, the item must be returned in its original box; otherwise, the return will not be accepted.
- Take a photo of the box markings. A photo of the text markings on the side of the box is required for part identification and to ensure you receive the correct parts.
- Take a photo of the damaged part (if applicable). A photo of any damage is necessary to file a claim and process your replacement or refund quickly. Ensure you keep the box, even if it is damaged.
- Send an email with the requested images. Email directly from the marketplace where the item was purchased, attaching the images and a description of your claim.
