Safie Adjustable

Intended Use

The luminaire is meant for standard use in damp environments and in outdoors areas which are covered by roofs. The luminaire is unsuitable for corrosive atmospheres (e.g. swimming pools, intensive animal husbandry, tunnels).

Safety Instructions

These instructions assume expert knowledge corresponding to a completed professional education as an electrician.

Never work when voltage is present on the luminaire. Caution - Risk of fatal injury!

Ensure that the luminaire is undamaged before installation and commissioning!

The manufacturer is not liable for any damage caused by incorrect or unauthorized use or by non-observance of these instructions.

Work on the luminaire (installation, maintenance, servicing, troubleshooting) may only be carried out by an authorized electrician.

DALI: Basic insulation between supply and control terminals.

The luminaire should be positioned so that prolonged staring into the luminaire at a distance closer than 2.2 meters is not expected.

5-Year Warranty Policy

Aura Light offers a 5-year warranty regarding manufacturing and material defects in products manufactured and/or sold by Aura Light. This warranty applies provided that the product information, whether in digital form via www.auralight.com or in physical form via printed mailings by Aura Light, refers to this warranty policy.

Technical Information

Technical information can be found at www.auralight.com.

Installation Spacing

Diagram shows installation spacing with dimensions: 50 mm clearance for power supply, and 25 mm clearance on sides.

Ceiling Cutout Reference

Downlight with External Driver Installation

Step 1

Open a hole in the ceiling according to the specified cutout size for the LED downlight.

Step 2

Use a screwdriver to open the driver terminal cover. Connect the wires according to the wiring diagram provided with the driver. Securely reattach the cover.

Step 3

Connect the downlight to the driver. Hold back the spring clip on the downlight, then push the downlight into the prepared hole in the ceiling.

Step 4

Ensure the downlight is securely fixed in the ceiling. Turn on the power supply.