Certos Installation Manual

General Information

Please read the instruction manual before installation and keep it for future reference.

Intended Use

The luminaire is meant for standard use indoor and in outdoor areas which are covered by roofs. The luminaire is unsuitable for corrosive atmospheres (e.g. swimming pools, intensive animal husbandry, tunnels).

Safety Instructions

These instructions assume expert knowledge corresponding to a completed professional education as an electrician.

Never work when voltage is present on the luminaire. Caution - Risk of fatal injury!

Ensure that the luminaire is undamaged before installation and commissioning!

The manufacturer is not liable for any damage caused by incorrect or unauthorized use or by non-observance of these instructions.

Work on the luminaire (installation, maintenance, servicing, troubleshooting) may only be carried out by an authorized electrician.

DALI: Basic insulation between supply- and control terminals.

5-Year Warranty Policy

Aura Light offers a 5-year warranty regarding manufacturing and material defects in products manufactured and/or sold by Aura Light, provided that the product information for the product in question in digital form via www.auralight.com, or in physical form via printed mailings by Aura Light, refers to this warranty policy.

The luminaire contains a control gear [control gear] and a replaceable LED light source [replaceable LED] that shall only be replaced by the manufacturer [manufacturer replacement].

Technical information can be found at www.auralight.com.

Installation Instructions

A. Loop Hanging Installation

Physical Dimensions

The loop hanging installation shows physical dimensions. The main body of the luminaire has a diameter of approximately 233.4mm and a height of approximately 203.5mm. The suspension cable length is approximately 383.5mm. Different models are available with power ratings of 100W/120W/150W and 200W.

Installation Steps

Step 1: Connect the suspension cable to the luminaire.

Step 2: Mount the luminaire.

B. Adjustable Surface Mount Installation

Physical Dimensions

The adjustable surface mount installation shows physical dimensions. The mounting plate has a diameter of approximately 233.4mm. The luminaire body has a diameter of approximately 233.4mm and a height of approximately 203.5mm. The total height with the mounting bracket is approximately 383.5mm. The luminaire can be adjusted to an angle of 90° [adjustable angle].

Installation Steps

Step 1: Prepare the mounting surface and attach the mounting bracket using screws [screw].

Step 2: Connect the wiring according to the wiring diagram.

Step 3: Attach the luminaire to the mounting bracket.

Step 4: Secure the luminaire.

Wiring Diagram