Aura Light Berzelia Street CL 2075 Installation Manual

Introduction

Please read this instruction manual carefully before installation and keep it for future reference.

Intended Use

The luminaire is designed for standard outdoor use and in coastal areas. It is not suitable for corrosive atmospheres such as tunnels or harbours.

Safety Instructions

These instructions are intended for individuals with expert knowledge equivalent to a completed professional education as an electrician.

• Never work on the luminaire while it is energized. Caution: Risk of fatal injury!
• Ensure the luminaire is undamaged before installation and commissioning.
• The manufacturer is not liable for any damage caused by incorrect or unauthorized use or by failure to observe these instructions.
• All work on the luminaire, including installation, maintenance, servicing, and troubleshooting, must be performed by an authorized electrician.

5-Year Warranty Policy

Aura Light provides a 5-year warranty covering manufacturing and material defects for products manufactured and/or sold by Aura Light. This warranty applies when the product information, accessible digitally via www.auralight.com or in physical form through Aura Light mailings, refers to this policy.

The luminaire contains a control gear and a replaceable LED light source. These components should only be replaced by the manufacturer or their authorized service agent.

Technical information is available at www.auralight.com.

Technical Features

Installation Guidelines

General Notes:

• Only original spare parts should be used for maintenance.
• The luminaire is suitable for outdoor use (IP66 rating).
• If the external flexible cable or cord is damaged, it must be replaced by the manufacturer or their service agent to avoid hazards.
• Installation must be performed by a qualified person. The terminal block is not included.
• The light source within the luminaire can only be replaced by the manufacturer, their service agent, or a similarly qualified person.
• Recommended pole height is between 4 to 8 meters, depending on the wattage, and the luminaire should be installed outside of arm's reach.

Mounting:

The luminaire can be fixed using adjustable mounting modules from either side or post-up entries, allowing for 16 different angles. The mounting module bolt should be tightened with 10 Nm force.

For pole mounting, use two stainless steel Allen keys (size 4) or bolt keys (size 13). The luminaire should be secured to the pole or console using a size 4 key.

Diagrammatic Description of Mounting Options:

• Post-up Entry: Shows a connection point with a bolt and nut, indicating a 10 Nm tightening torque. Dimensions are provided: Ø = 42-60 mm (diameter of the spigot) and la = 100 mm (entry dimension of the spigot to the mounting module).
• Side Entry: Similar to post-up entry, also indicating 10 Nm torque.
• Adjustable Angles: Diagrams illustrate mounting options with various angle adjustments for the luminaire relative to the mounting arm. Angles include 0°, (±5°), (±10°), and (±15°). The diagrams show how the luminaire can be tilted forwards/backwards (P/A) and side-to-side (S/Y).

Electrical Connection:

The luminaire features an easy connect system for electrical connections.

Wiring Color Codes:

• Class I: Line (Brown), Neutral (Blue), Earth (Green/Yellow).
• Class II: Line (Brown), Neutral (Blue).

Product Ratings

The luminaire has the following ratings:

• IP66: Protection against dust ingress and high-pressure water jets.
• CLASS I / CLASS II: Indicates electrical safety classification.
• IK10: High impact resistance.
• CE: Conforms to European health, safety, and environmental protection standards.