HOVET Mirror Assembly Instructions
Important Information
As wall materials vary, screws for fixing the mirror to the wall are not included. For advice on suitable screw systems, contact your local specialized dealer.
(The document also contains information in Hebrew regarding wall materials and fixing advice.)
Tools and Preparation
Before you begin assembly, gather the necessary tools:
- Screwdriver [screwdriver] (Note: Not included) ❌
- Pencil ✏️
- Spirit Level ?
- Measuring Tape ?
Ensure you handle the parts correctly. If you are unsure about any part of the assembly process, it is recommended to contact IKEA for assistance. ❓ ? [IKEA]
Parts Included
The following parts are included in the package:
- 2x Mounting Brackets (Part numbers: 10146789, 10146788) ?
- 2x Screws (Part number: 111275) ?
Assembly Instructions
For Vertical Mounting
- Mark Wall Points for Main Fixings
Position the mirror against the wall. Using a spirit level and pencil, mark two points on the wall for mounting. The distance between these points should be 764 mm (30 1/16").
[Diagram: Shows marking two points on a wall with a pencil and spirit level, with a measurement of 764 mm (30 1/16") indicated between the points.]
- Insert Wall Screws for Main Fixings
Insert two screws into the marked points on the wall. Ensure they are securely fastened.
[Diagram: Shows two screws being inserted into wall markings. A close-up illustrates a screw and wall plug (implied) being used.]
- Attach Mirror to Wall (Initial Hang)
Align the mirror with the wall screws and gently push it into place. The mounting brackets on the mirror frame will engage with the screws.
[Diagram: Shows the mirror being hung on the wall, engaging with previously installed screws/brackets.]
- Mark Additional Screw Point for Bracket
Mark a point on the wall approximately 50 mm (2") down from the top edge for a specific screw placement to secure the bracket.
[Diagram: Shows marking a point on the wall 50 mm (2") from the top.]
- Insert Additional Wall Screw for Bracket
Insert one screw into the marked point on the wall.
[Diagram: Shows a screw being inserted into a wall marking.]
- Attach Bracket to Mirror Frame
Attach a mounting bracket (10146789/10146788) to the mirror frame using screw 111275 and a nut.
[Diagram: Shows a bracket being attached to the mirror frame with a screw and nut.]
- Hang Mirror Securely on Wall Bracket
Carefully lift and hang the mirror onto the wall bracket, ensuring it is stable and secure.
[Diagram: Shows the mirror being hung onto the wall bracket.]
For Horizontal Mounting
- Mark Wall Points
Position the mirror against the wall. Using a spirit level and pencil, mark two points on the wall for mounting. The distance between these points should be 1944 mm (76 9/16").
[Diagram: Shows marking two points on a wall with a pencil and spirit level, with a measurement of 1944 mm (76 9/16") indicated between the points.]
- Insert Wall Screws
Insert two screws into the marked points on the wall. Ensure they are securely fastened.
[Diagram: Shows two screws being inserted into wall markings. A close-up illustrates a screw and wall plug (implied) being used.]
- Attach Mirror to Wall
Align the mirror with the wall screws and gently push it into place. The mounting brackets on the mirror frame will engage with the screws.
[Diagram: Shows the mirror being hung on the wall, engaging with previously installed screws/brackets.]
