HOVET Mirror

Important Information

Screws for wall mounting are not included as wall materials vary. For advice on suitable screw systems, contact your local specialized dealer.

Tools Required

• Screwdriver ?
• Pencil ✏️
• Spirit Level ?
• Tape Measure ?

Included Parts

• Mounting Brackets: 2x (Part numbers: 10146789, 10146788)
• Mirror Attachment Screws: 2x (Part number: 111275)

Note: Wall screws/anchors are not included and must be purchased separately based on your wall type.

Assembly Steps

Step 1: Determine Mounting Orientation

Decide whether to mount the mirror vertically or horizontally.

Step 2: Prepare Wall Fixings

Prepare the wall for fixing. If required, insert wall anchors suitable for your wall type.

For vertical mounting, ensure you have screws suitable for your wall type, approximately 50 mm (2 inches) long.

(Refer to diagrams on pages 7, 10 & 13)

Step 3: Attach Brackets to Wall

Attach the two mounting brackets (10146789, 10146788) to the wall at the marked points using appropriate screws and anchors for your wall type. Ensure the brackets are securely fastened.

(Refer to diagrams on pages 8, 11 & 14)

Step 4: Mount Mirror

Carefully align the mirror with the mounted brackets. The mirror has integrated mounting points that will connect with the brackets.

(Refer to diagrams on pages 8, 11, 15)

Step 5: Secure Mirror

Insert the two included mirror attachment screws (111275) through the brackets and into the mirror's corresponding holes. Tighten the screws securely using a screwdriver ?.

Ensure the mirror is firmly and safely attached to the wall.

(Refer to diagrams on pages 14 & 16)