EKET Cabinet Assembly Instructions

Important Safety Information

⚠️ WARNING: Serious or fatal crushing injuries can occur from furniture tip-over. To prevent this furniture from tipping over, it must be permanently fixed to the wall using the wall attachment fittings included in the packaging. If the product is to be hanged on the wall, it must be done with the designated suspension rail (sold separately at IKEA). Assess the wall to ensure that it will withstand the weight. As wall materials vary, screws for wall fixation are not included. For advice on suitable screw systems for your wall, contact your local specialised dealer. Wall fixing/hanging must be carried out by a qualified person, since wrong fixation may cause injury or damage.

Parts List

The following parts and hardware are included in the package. Quantities are indicated.

Side Panel Connectors: 12x (Part 152651)
Shelf Supports: 12x (Part 152650)
Screws: 6x (Part 108444)
Washers: 2x (Part 101313)
Plastic Caps: 4x (Parts 141413, 141414)
Door Hinge Mechanisms: 4x (Parts 133127/155201, 139477/155200)
Door Hinge Mounts/Arms: 8x (Parts 131372, 10119600, 10119658/10119673)
Wall Mounting Brackets: 2x (Part 141413)
Wall Mounting Caps: 2x (Part 141414)
Wall Bracket Fasteners: 2x (Parts 152470, 155675)
Wall Attachment Template/Set: 1x (Part AA-1908823)

Assembly Steps

Step 1

Insert 12x side panel connectors (Part 152651) into the designated holes on the side panels. The diagram shows hands inserting parts into the edges of panels.

Step 2

Attach two types of brackets (Parts 139468/155198 and 139467/155197) to a panel using 2x screws (Part 108444). An indicator shows a "Click!" sound. ? Use a screwdriver ?.

Step 3

Connect three panels together using the inserted connectors. Arrows indicate the direction of connection. A hand is shown pushing a connector pin.

Step 4

Assemble the main frame by connecting the remaining side panel. Arrows indicate insertion points.

Step 5

Place a back panel support piece over the top of the assembled frame. An arrow indicates sliding it into place.

Step 6

Slide the back panel into the grooves on the frame. An arrow indicates the direction.

Step 7

Secure the back panel. Close-ups show how the panel edges fit into grooves. A warning symbol ⚠️ is present, indicating caution.

Step 8

Attach base connectors or feet to the bottom of the cabinet. The diagram shows 2x of Part 10093081 and 2x of Part 10093082 being attached.

Step 9

Continue attaching base connectors or feet to the bottom of the cabinet. The diagram shows 11x of Part 10093081 and 10093082 being attached.

Step 10

Illustrations show two options: placing the cabinet in a corner on the floor, or preparing for wall mounting. The wall mounting option shows a hand holding a template (Part AA-1908823) and a ruler/measuring tape.

Step 11

Attach wall mounting brackets (Part 141413) to the back of the cabinet using screws.

Step 12

Secure the cabinet to the wall. The diagram shows a drill ? being used to attach the cabinet to the wall using screws (Ø 8 mm / 5/16"). This step reinforces the wall mounting requirement.

Step 13

Attach wall mounting caps (Part 141414) to the wall brackets. The diagram shows a hand turning the caps to secure them.

Step 14

Adjust the cabinet's position against the wall. Arrows indicate slight movements.

Step 15

Insert 12x shelf supports (Part 152651) into the pre-drilled holes inside the cabinet. The diagram shows two options for shelf support placement, one with a cross ❌ indicating it's not to be used.

Step 16

Attach 2x shelf support caps (Part 152650) to the shelf support mechanisms. The diagram shows a hand turning the caps.

Step 17

Attach 4x door hinge components (Part 131372) to the cabinet frame. Screws are used.

Step 18

Insert shelves into the cabinet, resting them on the shelf supports. The diagram shows a shelf being lowered into place and a cross ❌ indicating incorrect placement.

Step 19

Attach 4x hinge mechanisms (Parts 10119658, 10119673, 10119600) to the cabinet doors.

Step 20

Attach handles or knobs to the doors using 2x screws (Part 108444) and 2x washers (Part 101313).

Step 21

Attach 2x door mounting plates (Parts 152470, 155675) to the doors.

Step 22

Mount the doors to the cabinet frame using hinge mechanisms (Parts 133127/155201 and 139477/155200). The diagram shows the doors being attached.

Step 23

Connect the doors to the frame's hinge mounts.

Step 24

Final door adjustment. The diagram shows a hand turning screws on the hinges to fine-tune the door position. An indicator shows a "Click!" sound. ? Use a screwdriver ?.

Step 25

Final door adjustment detail. The diagram shows adjusting the doors using hinges (4x).

Step 26

Final door attachment detail. The diagram shows the mechanism engaging with a "Click!" sound.

Step 27

Final door adjustment. The diagram shows adjusting the doors using hinges (4x).

Step 28