EKET Cabinet Assembly Instructions
Important Safety Information
⚠ WARNING: Serious or fatal crushing injuries can occur from furniture tip-over.
To prevent this furniture from tipping over, it must be permanently fixed to the wall using the wall attachment fittings included in the packaging. If the product is to be hanged on the wall, it must be done with the designated suspension rail (sold separately at IKEA). Assess the wall to ensure that it will withstand the weight. As wall materials vary, screws for wall fixation are not included. For advice on suitable screw systems for your wall, contact your local specialised dealer. Wall fixing/hanging must be carried out by a qualified person, since wrong fixation may cause injury or damage.
Hebrew Warning:
אזהרה! נפילת הרהיט עלולה לגרום לפגיעה גופנית חמורה או קטלנית. על מנת למנוע את נפילת הרהיט, יש לקבע אותו לקיר באמצעות אבזרי הקיבוע הכלולים באריזה. במידה ומוצר זה יתלה על הקיר, יש לעשות זאת באמצעות האבזר המיועד לכך (נמכר בנפרד ב-IKEA). יש לבחון את הקיר אליו יקובע הרהיט על מנת לוודא כי יוכל לשאת את המשקל. הברגים לקיבוע אינם כלולים מכיוון שיש להתאים אותם לחומר ממנו עשוי הקיר המיועד. לקבלת מידע נוסף על הברגים המתאימים לקיבוע, אנא פנו לאיש מקצוע ו/או לחנות מתמחה. הקיבוע צריך להתבצע על ידי אדם המוכשר לכך, מאחר וקיבוע שגוי עלול לגרום לפציעה חמורה או נזק.
Parts List
Refer to the diagrams for visual identification of parts and their quantities.
Assembly Steps
Step 1: Preparation
Gather necessary tools: [screwdriver], [spirit-level], and a [drill] with an 8 mm (5/16") [drill-bit]. Ensure you have adequate space and a clean work area.
Step 2: Attach Fittings
Attach the fittings (e.g., 108444, 139468, 155198) to the designated panels. Follow the diagrams carefully for correct placement and orientation. Some fittings may click into place [[click]].
Step 3: Assemble Frame
Connect the side panels to the base panel using the provided fittings (e.g., 3x 10093081). Ensure all connections are secure.
Step 4: Attach Side Panels
Attach the remaining side panels to the assembled base and top structure. Ensure the panels are correctly aligned.
Step 5: Attach Top/Bottom Panels
Secure the top and bottom panels to the frame. Pay attention to the orientation and ensure a flush fit.
Step 6: Attach Back Panel
Slide or attach the back panel into the grooves or designated slots on the assembled frame. Ensure it is fully seated.
Step 7: Secure Back Panel
Use the provided fixings (e.g., 1x 10093082) to secure the back panel to the frame. Insert the fixings into the pre-drilled holes.
Step 8: Attach Feet
Screw the feet (e.g., 2x 141413) into the designated holes on the bottom of the cabinet. Ensure they are tightened securely.
Step 9: Wall Mounting Preparation
Position the cabinet in its final location. For wall mounting, use the provided wall attachment fittings. Ensure the wall is suitable for the weight. If hanging on a wall, use a designated suspension rail (sold separately). The diagram shows attaching a bracket to the wall and then to the cabinet. A warning symbol [!] indicates caution when drilling into the wall.
Step 10: Attach Door Hinges
Attach the hinges (e.g., 2x 10119600, 2x 10119658, 2x 10119673) to the door and the cabinet frame according to the diagrams. Ensure correct alignment for smooth door operation.
Step 11: Mount Cabinet to Wall
Secure the cabinet to the wall using the appropriate wall attachment fittings. The diagram shows screwing fittings into the cabinet and then into the wall, requiring an 8 mm (5/16") drill bit.
Step 12: Attach Door
Attach the door to the cabinet by aligning the hinges with the corresponding mounting points on the cabinet frame. The diagram shows inserting a pin and securing it.
Step 13: Adjust Door
Adjust the door for proper alignment and closure. The diagram shows rotating a screw to adjust the door position.
Step 14: Attach Door Handle
Attach the door handle (e.g., 1x 133127, 1x 155201) to the door using the provided screws. Ensure it is securely fastened.
Step 15: Attach Door Handle
Attach the door handle (e.g., 1x 139477, 1x 155200) to the door using the provided screws. Ensure it is securely fastened.
Step 16: Attach Door Hinges
Attach the hinges to the door and cabinet frame. The diagram shows attaching hinges to the door edge.
Step 17: Attach Door Hinges
Attach the hinges to the door and cabinet frame. The diagram shows attaching hinges to the cabinet side panel.
Step 18: Insert Shelf Supports
Insert the shelf supports (e.g., 1x 108444, 1x 101313) into the pre-drilled holes inside the cabinet at the desired height.
Step 19: Insert Shelf
Place the shelf onto the inserted shelf supports. Ensure it sits level and securely.
Step 20: Attach Door
Attach the door to the cabinet. The diagram shows aligning the door with the cabinet and securing it with fittings.
Step 21: Adjust Door
Adjust the door for proper alignment and closure. The diagram shows inserting a fitting and securing it with a click [[click]].
Step 22: Final Door Mechanism
The final steps involve attaching a door closing mechanism. The diagrams show inserting components and ensuring they engage correctly, resulting in a click [[click]].
Final Check
Ensure all parts are securely fastened and the cabinet is stable. If wall-mounted, confirm it is safely attached.
