Signature Design by Ashley D634-35 Wildenauer Dining Extension Table Assembly Instructions
Model Number: D634-35
Important Safety Notice
Read carefully before beginning assembly!
- Always use proper tools.
- Follow the assembly steps in order. Do not skip any steps.
- Check all packing materials for small parts that may have come loose. Contact the retailer for missing parts. DO NOT USE SUBSTITUTE PARTS.
- Periodically check that all connectors (bolts, screws, etc.) are tight.
- Keep instructions for future reference.
- Handle glass or mirrors with extreme care to avoid severe injury if they break. Never handle large pieces of glass or mirrors alone.
- When assembling products with electrical cords (lamps, lights, motors, power strips), ensure the cord is unplugged before assembly, do not twist or pinch the cord, and DO NOT USE AN EXTENSION CORD.
- Note: During charging, the device and charger may heat up; this is normal. If the battery gets hotter than usual, charging may stop.
- WARNING: Remove all metal objects (coins, keys) from the charging surface and from your mobile phone before placing the device on the charging surface. Some mobile devices or cases may attract metal objects.
- When assembling shelves or entertainment centers, use a step ladder; do not stand on lower shelves to assemble upper shelves.
- Do not stand on tables, including end tables, coffee tables, and dinner tables, as they are not designed to support a person's weight.
- If assembly requires two or more people, do not attempt alone due to risk of injury.
Disclaimer: Ashley Furniture Industries, LLC disclaims any liability for damages or injuries resulting from failure to properly follow assembly instructions, properly assemble the product, or properly use the product.
Note: Your unit may look different from the one shown in the illustrations.
Parts List
Identify all parts before starting assembly.
- A x 1
- B x 4
- C x 2
- D x 2
- E x 1
- F x 2
- G x 4
- H x 2
- J x 2
- K x 1
Hardware sizes include:
- 5/16" x 3"
- 5/16" x 2-1/2"
- 5/16" x 1-1/2"
- 5/32"
Required Tool (Not Included): A Phillips head screwdriver is required for assembly.
Assembly Steps
Important Notes:
- Assembly should be done by two or more people.
- Do not tighten any bolts until all bolts have been started.
Step 1: Attach part C to part B using part K (x2) and 5/16"x1-1/2" bolts. Repeat for the other side.
Step 2: Attach part D to the assembled B/C structure using part K (x2) and 5/16"x2-1/2" bolts. Repeat for the other side.
Step 3: Attach part F to the structure using part J (x8) and 5/16"x1-1/2" bolts. Ensure all bolts are started before tightening.
Step 4: Place the table top (A) upside down on a protected surface. Attach the assembled leg structure to the table top using the provided hardware.
Step 5 (Optional Leaf Assembly):
Follow the instructions to add the leaf to the table.
Step 6: Extend the table by pulling the ends apart.
Step 7: Insert the leaf into the extended table.
Step 8: Lower the leaf into place.
Step 9: Secure the leaf by engaging the locking mechanism.
Step 10: Retract the table ends to secure the leaf.
Step 11: Adjust the levelers on the bottom of the legs to ensure the table is stable.
- To extend the leveler: Turn in a clockwise direction.
- To retract the leveler: Turn in a counterclockwise direction.
Multilingual Notes
- Spanish: NOTA IMPORTANTE DE SEGURIDAD: LEA CUIDADOSAMENTE ANTES DE COMENZAR A ENSAMBLAR.
- French: REMARQUE IMPORTANTE CONCERNANT LA SÉCURITÉ: LIRE ATTENTIVEMENT AVANT DE COMMENCER LE MONTAGE!
- Chinese: 注意:产品应由两个或者两个以上的人员组装。在产品组装过程中,不要锁紧螺栓!
Contact Information
For replacement parts, contact RTAParts@ashleyfurniture.com or visit www.ashleyfurniture.parts.
Customer Service: 1-844-966-0809
