VEVOR

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands.

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

CustomerService@vevor.com

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.

SAFETY INSTRUCTIONS

WARNING:

1. Please do not put it near flammable materials.
2. It is forbidden to carry people at any condition.
3. Please pay attention to safety when going up and down stairs.
4. Overload is strictly prohibited.
5. Don't move too fast when passing potholes areas.

Model and Parameters

Structure Diagram

A diagram showing the stair climbing cart with numbered parts:

• 1. Handle
• 2. Snap
• 3. Front Support
• 4. Spare Wheel
• 5. Climbing Wheel
• 6. Universal Wheel

COMPONENTS

• A. Frame (x1)
• B. Wheel Frame (x2)
• C. Wheel Sets (x2)
• D. Connectors (x2)
• E. Front Support (x1)
• F. Bolts M10 (x6)
• G. Bolts M5 (x2)
• H. Bolts M8 (x2)
• I. Spacer sleeves (x2)
• J. Nuts M5 (x2)
• K. Nuts M8 (x2)
• L. Nuts M10 (x6)
• N. Washer (x2)
• M. Cotter Pin (x2)
• O. Attached Installation Tools (x2)

Assembly and Use

1. Fix front support(E) to the front of the frame with bolts (G+J).
2. Fix wheel frame(B) on both sides of the frame with bolts (F+ L).
3. Use bolts(F+L), (H+K) to connect and fix connector(D) as shown in the figure.
4. Put spacer sleeve(I) and washer(N) into the axle in the order shown in the figure.
5. Install the wheel set(C), insert the pin(M) and bend it.

Troubleshooting Instruction

Maintenance

1. Avoid prolonged exposure to the sun to avoid aging.
2. Please fold the cart when it is not used for a long time.
3. Avoid children taking the STAIR CLIMBING CART to play.

Manufacturer Information

Manufacturer: Jinhua Development Measuring Tools Co.,Ltd.

Address: Qiubin industrial park, Wucheng District, Jinhua, Zhejiang province

Country of Origin: MADE IN CHINA