PANEL CARTS
USER MANUAL
MODEL: RYTC0072
VEVOR is committed to providing tools with competitive prices. Phrases like "Save Half" or "Half Price" represent an estimate of potential savings compared to major top brands and do not necessarily cover all product categories. Customers are advised to verify savings when placing an order.
[Image of VEVOR Panel Cart RYTC0072: a metal cart with a flat base, four swivel casters, and two sets of vertical rails for holding panels]
NEED HELP? CONTACT US!
For product questions or technical support, please contact:
This is the original instruction manual. Please read all instructions carefully before operating. VEVOR reserves the right to interpret its user manual. Product appearance is subject to the received item. VEVOR will not provide notification for technology or software updates.
SAFETY INSTRUCTION AND PRECAUTIONS
WARNING: Read this material before using this product. Failure to do so can result in serious injury.
Assembly Precautions
- Assemble only according to these instructions. Improper assembly can create hazards.
- Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
- Keep assembly area clean and well lit.
- Keep bystanders out of the area during assembly.
- Do not assemble when tired or when under the influence of alcohol, drugs, or medication.
- Weight capacity and other product capabilities apply to properly and completely assembled product only.
- Assemble on a flat, level, hard, and smooth surface capable of safely supporting a fully loaded panel cart.
Use Precautions
TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING:
- DO NOT SIT, STAND, OR CLIMB ON THIS ITEM.
- This product is not a toy. Do not allow children to play with or near this item.
- Do not exceed weight capacities, evenly distributed from bottom up. Be aware of dynamic loading! Sudden load movement may briefly create excess load causing product failure.
- Use only on a flat, level, hard, and smooth surface capable of safely supporting a fully loaded panel cart.
- Use as intended only. To prevent tipping, push/pull using the supplied handle only. Do not lift while loaded.
- Inspect before every use; do not use if parts are loose or damaged.
SAVE THESE INSTRUCTIONS
TOOL REQUIRED FOR INSTALLATION
[Phillips Screwdriver] [Rubber mallet]
Note: The Phillips screwdriver and rubber mallet tools are not included with this product.
PARTS LIST
- 1- Chassis [Image of a rectangular base frame with four mounting points for wheels]
- 2- Column [Image of vertical posts]
- 3- Handrail [Image of a U-shaped bar assembly]
- 4- SwivelCaster [Image of a caster wheel with a mounting plate]
- 5- Bolts (M8*16) [Image of several bolts and nuts]
- 6- Set screw [Image of several set screws]
- 7- Polyester strap [Image of a strap with a buckle]
ASSEMBLY
Step 1
Install the wheels onto the frame, ensuring the frame faces upwards. Secure them with 16mm screws.
[Diagram showing four swivel casters being attached to the underside of a rectangular frame using screws]
Step 2
Install the column(s) onto the base and fix them securely with screws.
[Diagram showing four vertical columns being attached to the top of the rectangular frame using screws]
Step 3
Install the armrest (handrail) onto the column(s) and fix it with screws.
[Diagram showing the U-shaped handrail assembly being attached to the tops of the vertical columns using screws]
PRODUCT SPECIFICATIONS
| Item | Description |
|---|---|
| Name | Panel carts |
| Model | RYTC0072 |
| Parameter | Load (Max): 1500 LBS, Wheel: 5" |
| Package Size | 1015x665x140mm |
| G.W. | 24.45KG |
MADE IN CHINA
Contact Us â Official VEVOR Support
