Product Overview
This document is the user manual for the VEVOR Stair Climbing Cart, model Z06-3S. VEVOR is committed to providing tools at competitive prices. The terms "Save Half" or "Half Price" are estimates of potential savings compared to major brands and may not apply to all product categories. Customers are advised to verify savings at the time of purchase.
This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves the right to interpret its user manual. The appearance of the product is subject to the item received. VEVOR will not provide further notification for technology or software updates.
Contact Information
For product questions or technical support, please contact:
Safety Instructions
WARNING:
- Please do not place near flammable materials.
- It is forbidden to carry people under any condition.
- Please pay attention to safety when going up and down stairs.
- Overloading is strictly prohibited.
- Do not move too fast when passing pothole areas.
Model and Parameters
| Model | Z06-3S |
|---|---|
| Maximum Load (Flat ground) | 35kg |
| Maximum Load (Climb Stairs) | 15kg |
| Maximum Load (tray) | 75kg |
| Maximum Load (seat) | 100kg |
| Bag Volume | 50L |
| Folded Size | 8.2*45.1*82.2cm |
| Unfolding Dimension | 53.5*43.5*96.5cm |
Structure Diagram
The structure of the stair climbing cart is indicated by the following numbered parts:
- 1. Handle: The upper part for gripping and maneuvering the cart.
- 2. Chair: A foldable seat integrated into the cart's frame.
- 3. Climbing Wheel: A specialized multi-wheeled assembly designed for stair climbing.
- 4. Cloth Bag: The main storage compartment, typically made of fabric.
Components
The cart includes the following main components:
- Frame (x1): The primary metal structure of the cart, including the handle, legs, and wheel mounts.
- Wheel Set (x2): Two sets of the specialized climbing wheels.
- Cloth Bag (x1): The fabric bag for carrying items.
Assembly and Use
- Step 1: Pull down the horizontal pipe as shown in the figure. Ensure the black plastic part is securely clamped into the rivet.
- Step 2: Remove the black protective sleeve from both ends of the shaft.
- Step 3: Press the n-type spring down towards the wheel center. Simultaneously, push it inward towards the axle. Release the spring, then pull the wheel outward to snap it into the axle groove.
- Step 4: Open the seat face downwards to position it as shown in the figure.
- Step 5: Pass the frame through the middle of the cloth bag and secure it at each position using the Velcro straps.
Troubleshooting Instruction
| Problem | Reasons | Solution |
|---|---|---|
| Wheel rolling is not smooth | Insufficient lubrication | Add oil to lubricate the rotating parts. |
| Velcro is not sticky | The Velcro has sundries (e.g., hair, thread). | Clean the hair, thread, and other sundries on the Velcro. |
Maintenance
- Avoid prolonged exposure to the sun to prevent aging.
- Clean the hair, thread, and other sundries on the Velcro in a timely manner.
- Clean any dirt from the cloth bag promptly.
Manufacturer and Importer Information
Importer: WAITCHX
Address: 250 bis boulevard Saint-Germain 75007 Paris
Importer: FREE MOOD LTD
Address: 2 Holywell Lane, London, England, EC2A 3ET
EU Representative: EUREP UK LTD
Address: UNIT 2264, 100 OCK STREET, ABINGDON OXFORDSHIRE ENGLAND OX14 5DH
EU Representative: EUREP GmbH
Address: Unterlettenweg 1a, 85051 Ingolstadt, Germany
Manufacturer: Zhejiang Yongkang Haibo Leisure Bag Factory
Address: No.16 Changlong Road, Ivnanzhai village, Longshan Town, Yongkang City, Zhejiang Province
Country of Origin: MADE IN CHINA
百度翻译-200种语言互译、沟通全世界！
