VEVOR 8822 Shopping Cart User Manual

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate
www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves the right to interpret its user manual. The appearance of the product is subject to the item received. VEVOR will not provide further notice for technology or software updates on its products.

Safety Instructions

WARNING:

Read these instructions before using this product. Failure to do so can result in serious injury.

• 1. Please do not place the product near flammable materials.
• 2. It is forbidden to carry people under any condition.
• 3. Please pay attention to safety when going up and down stairs.
• 4. Overload is strictly prohibited.
• 5. Do not move too fast when passing pothole areas.
• 6. Use as intended only. Do not stand on the item or use it as a step ladder.
• 7. This is not a toy. Not for use by children. Do not let children play or jump on the product.

SAVE THESE INSTRUCTIONS

Model and Parameters

Structure Diagram

The shopping cart is composed of the following parts:

• 1. Handle: The part used to pull or push the cart.
• 2. Telescopic Rod: The adjustable metal rods that extend the handle.
• 3. Cover: The lid that closes the top of the box.
• 4. Box: The main storage compartment of the cart.
• 5. Universal Wheel (With Brake): Wheels that can rotate 360 degrees and have a locking mechanism.
• 6. Lock Catch (Side): Latches on the side panels to secure them.
• 7. Cover Fastener: Clips or mechanisms to secure the cover.
• 8. Connector: Parts that connect different sections of the cart.
• 9. Universal wheel (no brake): Wheels that can rotate 360 degrees without a brake.

[Description of the visual: A black, foldable utility cart with a telescoping handle and four wheels. The cart is shown in its open state, with the box unfolded and the handle extended.]

Assembly and Use

Follow these steps to assemble and use the shopping cart:

1. Step 1: Expand the Box. Open the side snaps, pull out the sides, and enlarge the side panel to form the main box structure.

   [Description of visual: Hands are shown opening side snaps and pulling outwards on the side panels of a folded cart to expand it.]

2. Step 2: Insert Bottom Plate and Connect Panels. Place the bottom plate inside the expanded box and connect the side panels securely.

   [Description of visual: A bottom plate is being inserted into the base of the expanded cart, and hands are shown connecting the side panels.]

3. Step 3: Attach and Adjust Handle. Remove the cover from the back panel. Place the cover on top. Use the cart when the telescopic bar (handle) is raised to a suitable height.

   [Description of visual: A cover is being placed onto the cart, and the telescoping handle is shown extended.]

4. Step 4: Folding the Cart. Follow these steps to fold the cart for storage or transport.

   [Description of visual sequence: The cart is shown in its open state, then partially folded, and finally fully collapsed into a compact form.]

Troubleshooting Instruction

Maintenance

1. Avoid prolonged exposure to the sun to prevent aging of the material.
2. Avoid the box from cracking due to violent impact, especially when going uphill and downhill.