Toucan TWC200WU Wireless Outdoor Camera

Get to know your wireless outdoor camera

The Toucan Wireless Outdoor Camera captures events around your property. View and communicate with your visitors from anywhere.

Key Components:

• Camera lens: Captures video footage.
• Microphone: Records audio.
• Light sensor: Detects ambient light levels.
• Motion sensor: Detects movement.
• LED indicator: Shows camera status.
• Speaker: For two-way audio communication.
• SET button: Used for setup and pairing.
• RESET button: Used to reset the device.
• Micro USB plug: For charging the camera.
• Tripod screw hold: For mounting the camera.

Items included

• Wireless Outdoor Camera
• Magnetic Base Mount
• Charging Cable
• Wall Anchors
• Screws
• Adhesive Tape
• Thank You Card
• Warranty Card
• Quick Start Guide

Charge your wireless outdoor camera

To charge the camera, open the bottom cover and plug in the micro USB cable to the camera and a power source. It is recommended to fully charge the device before its first use.

LED Indicator Status:

• Solid Red: Charging Battery
• Solid Blue: Battery Fully Charged

Setup your wireless outdoor camera

Download the Toucan app by scanning the [QR code] or visiting www.toucansmarthome.com/pages/smarthomeapp. The app is available on the Apple App Store® and Google Play™.

Open the app to add your camera. Press and hold the SET button until the LED light blinks to enter setup mode. Follow the camera's voice navigation to complete the setup and pairing process.

LED Indicator Status during Setup:

• Flashing BLUE: Setup Mode
• Flashing PURPLE: Connecting to cloud server
• Flashing RED: Connection Failed

After setup and pairing, you can change the language of your app within the settings section [settings icon].

Install your wireless outdoor camera

You can mount the camera using the magnetic base mount. The mount can be attached using screws and wall anchors, or with the included adhesive tape.

Important Notes for Adhesive Mounting:

• If using 3M adhesive only, allow 24-48 hours before placing the camera onto the mounting base to ensure maximum bonding strength.
• Apply 3M adhesive to dry surfaces only.
• The adhesive can be used on UPVC, wooden, or smooth surface door frames. It is not suitable for brick or stone surfaces.

Regulations & Compliance

FCC Statement

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

ISED Regulatory Compliance

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device.

L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : 1. L'appareil ne doit pas produire de brouillage; 2. L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

RF Exposure Compliance

This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Cet équipement est conforme aux limites d'exposition aux radiations FCC/IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec une distance minimale de 20 cm entre le radiateur et votre corps.

EU Compliance

VuPoint (Europe) Company Limited declares that the equipment complies with Directive 2014/53/EU. Full declaration text available at: www.toucansmarthome.co.uk/pages/certificates

Support and Company Information

For FAQs, Videos, and support, please visit our website: www.toucansmarthome.co.uk

For North and South America, please visit www.toucansmarthome.com

Company Addresses:

• VuPoint Solutions, Inc. (USA): 710 Nogales Street, City of Industry, CA 91748
• VuPoint (Europe) Company Limited: Innovation Center, Longbridge Technology Park, Longbridge, Birmingham B31 2TS

Follow us for the latest updates:

• Facebook: facebook.com/toucansmarthomeeu
• YouTube: youtube.com/toucansmarthome
• Instagram: instagram.com/toucansmarthomeeu

©2021 VUPOINT SOLUTIONS, INC. All Rights Reserved.

The Toucan logo and Toucan are trademarks or registered trademarks of VuPoint Solutions Inc. in the United States and other countries. App Store is a registered trademark of Apple Inc. iOS is a registered trademark of Cisco Technology, Inc. in the U.S. and other countries and is under license. Android and Google Play are registered trademarks of Google LLC. Product names, logos, brands, and other trademarks referred to herein are the property of their respective trademark holders. All trademarks remain the property of their respective holders, and are used only to describe the products or services being provided. These trademark holders are not affiliated with VuPoint Solutions, Inc. They do not sponsor or endorse VuPoint Solutions, Inc's products or services.

Compliance Marks: FCC, CE