Toucan Surveillance Kit

Table of Contents

• 1. Key Features
• 2. What is Included
• 3. Positioning
• 4. Toucan Installation
• 5. Status LED Indicators
• 6. Specifications
• 7. Troubleshooting & FAQ
• 8. Regulations & Compliance

1. Key Features

Toucan Camera

• Easy 3-Steps Installation: ? DIY installation in minutes; no need to pull wires.
• Wireless Connectivity: ? Built-in Wi-Fi® and Bluetooth® technology.
• Wide Angle Adjustable Lens: ? Clear HD LIVE video feed and event recording capture.
• Passive Infrared Sensor: ? Detects change in motion.
• 2-way communication: ? Built-in microphone and high-fidelity speaker for clear audio communication.
• 100dB Siren Alarm: ? Sound the alarm instantly to unwanted visitors.
• Weatherproof Design: ? Withstands rain, snow, humidity, and house maintenance year-round.

Smart Socket

• Adapt to lamp fixture: ? Simply thread in E26 adapter between fixture and the bulb.
• Remote Light Control: ? Turn on and off the lights.
• Mesh Network Connectivity: ? Total security solution for entire home with Bluetooth® technology.
• USB power adapter: ? Provides power to camera.
• Schedule dusk-to-dawn: ⏰ Timer feature to schedule light to turn on at dusk and off at dawn through cloud system.

Functions on the KUNA app

The KUNA app allows users to receive automatic notifications, view live video, and communicate directly with visitors at the door. Captured footage is stored in the Cloud Server for up to 2 hours.

• Toucan Camera Name: Set up by user.
• Date: Displays the current date.
• Wide Angle LIVE view: Live video feed from the camera.
• Light control: Turn ON/OFF the lights remotely.
• Automatic Notifications: Receive alerts for detected activity.
• Live video indicator: Shows when the live video feed is active.
• 100dB Siren Alarm: Activate the siren to deter unwanted visitors.
• Play Message: Option to play pre-recorded messages.
• LIVE Camera: Direct view from the camera.
• Hold to talk: Enables 2-way communication.
• View Recorded Videos: Access past recordings.
• Camera setting: Access camera configuration options.
• App and Contact Info: Information about the app and support.

*User interface is subject to change without prior notice.

2. What is Included

Before installing Toucan, ensure all parts are present. If any part is missing, contact VuPoint Solutions at support@vupointsolutions.com.

Components for Mounting Camera on Mount Plate:

• Toucan Camera: Mount camera under light fixture.
• Smart Socket: Thread between light fixture and light bulb. USB port provides power to camera.
• Mount Plate Cover: Fix the cable position.
• Conduit Cover: Fix the cable position.
• Camera Mount Plate: Fix the cable position on mount plate.
• Positioning Sticker: Indicator for camera's position on the wall during installation.
• Conduit: Manage the cable between cable and light fixture with adjustable length.
• Visor: Anti-glare from light bulb.

Cable Management Components:

• USB cable with Silicon pipe: Connect camera to socket for power source. Silicon pipe protects USB cable when installing lamp shade on fixture.
• Cable Clips (3pcs): Manage the cable on light base plate.

Mounting Hardware:

• Mount Screws (2pcs): For wall mounting.
• Washers (2pcs): For wall mounting.
• Wall Inserts (2pcs): For wall mounting.
• Hexagonal Wrench: To lock and unlock the camera on the mount plate.

Manual and Labels:

• User's Manual: This document.
• Warranty Card: Contains warranty information.
• Power Sticker: A reminder to stick on the main power switch to keep it ON.
• Secure Stickers (3pcs): To alert intruders that the home is secured by Toucan.

3. Positioning

The Smart Socket is compatible with standard light bulbs A15 and A19 and supports up to 75W. If your lamp shade height is less than 7 inches, or if the light bulb protrudes from the fixture after threading the Smart Socket and bulb, consider using a smaller light bulb.

Lightbulb Compatibility:

• A15 bulb
• A19 bulb

Light fixture with socket:

It is recommended to position the camera beneath the light fixture. If the camera is placed approximately 5 inches beneath the lamp base against the wall, install the conduit to manage the cables.

*Placement recommendations may vary based on different light fixture's designs, style, and size.

4. Toucan Installation

Before installation, ensure the power switch is OFF or disconnect power at the fuse. Refer to Section 2 ("What is Included") for a list of parts.

STEP 1: Socket Installation

1. Remove the USB cover. Before installing the socket into the light fixture, disassemble the lamp shade if necessary.
2. Install the Smart Socket into the fixture.
3. Thread in the light bulb.
4. Attach the USB Cable to the Smart Socket.
5. Reattach the lamp shade if necessary.
6. Screw the lamp shade back in and pull the USB cable through the shade. Adjust the Silicon Pipe from the USB cable to protect the cable.

STEP 2: Mounting the camera's back plate

Remove optional inner temporary adhesive for camera positioning and use the leveler to align and balance the back plate. You can use a pencil or the included Positioning Sticker to mark placement before adhering to your wall.

Refer to Option 1 for mounting with adhesive or Option 2 for mounting with screws.

OPTION 1: Mounting with adhesive

1. After using the Leveler to adjust the balance of the plate, adhere the Positioning Sticker to mark the center of the plate.
2. Remove and flip the plate to remove outer adhesive from the back plate for a more stable placement on the wall.
3. Align the back plate with the Positioning Sticker on the wall to center the plate.

OPTION 2: Mounting with screws

1. After using the Leveler to adjust the balance of the plate, use a pencil to mark the placement for the screws.
2. Drill holes for screw placement.
3. Install Wall Inserts.
4. Mount the back plate with Washers and Screws.

STEP 3: Camera body installation

1. Plug the USB Cable into the back of the camera and loop the cable around the rings; continue looping the cable if necessary.
2. Mount the camera to the back plate. Align the white dot to the left of the screw where the white arrow starts, and rotate the camera counter-clockwise to lock.
3. Manage the cable with the optional Conduit. Then attach the Cover to the top of the conduit/mount plate.
4. Position the camera and use Cable Clips to manage the cable if necessary.
5. Tighten the security screw with the hexagonal wrench. Do not over-tighten the security screw.
6. Attach the Visor to the top of the camera lens.

5. Status LED Indicators

To set up your Toucan, ensure it is successfully installed. The status LED on the bottom left side of your Toucan camera should be flashing red, indicating it is ready for setup.

6. Specifications

Toucan Camera (Model: TC100KU)

Toucan Smart Socket (Model: TS100WU)

7. Troubleshooting & FAQ

Note: Model Number and Serial Number (S/N) is located on the packaging, instruction manual, or on the product. Please have this information ready before contacting tech support.

Frequently Asked Questions

1. How long will my recordings be available?

Toucan comes standard with a two-hour download and "look back" window. With premium subscription plans, you can "go back in time" to access every event that your Toucan generated for up to 30 days.

2. Do I have to leave my light switch on?

Yes, Toucan uses power continuously, so you must leave the light switch on. A "Keep it On" label is provided as a reminder.

3. How many Toucan Cameras can I install at home?

There is no limit. It is recommended to install Toucan at all major entry points. You can add multiple cameras to your Kuna app and manage each camera within the app.

4. Can I use an LED bulb with Toucan?

Yes, using an LED bulb is recommended.

5. What is the maximum light bulb wattage I can use with the Smart Socket?

The Smart Socket supports a maximum of 75W.

6. I do not see any Toucan camera show up in the setup screen?

Toucan uses Bluetooth® LE 4.0 for setup. Ensure you are within about 10 feet of the Toucan and have Bluetooth enabled on your mobile device. Try rebooting your mobile device and relaunching the Kuna app.

7. My Toucan is "offline"?

1. Reboot your Toucan: Turn off your Toucan (using the light switch it's connected to) and wait at least 10 seconds. Then, turn the light switch back on.
2. Run through the set-up process: Re-add the Toucan camera. This issue may be caused by a weak Wi-Fi signal. Improve performance by moving your router closer to your Toucan, or adding a Range Extender in between.

Note: If you need to change the router or ownership of your Toucan, please contact Kuna Customer Service to reset the Toucan.

8. Regulations & Compliance

SAFETY & OPERATIONS

USB power output is a maximum of 5W. Please adhere to the following safety instructions. Failure to follow the instructions outlined in this user's manual may lead to serious personal injury and possible property damage.

Use only the USB cable packaged with the product from Toucan. The Smart Socket and USB cable may become warm during normal use. Always allow adequate ventilation around the smart socket and USB cable, and use care when handling. Unplug the device if any of the following conditions exist:

• The USB cable or Smart Socket has become frayed or damaged.
• The USB connector or Smart Socket is exposed to rain, liquid, or excessive moisture.
• The USB cable or Smart Socket has become damaged.
• You suspect the USB cable or Smart Socket needs service or repair.
• You want to clean the USB cable or Smart Socket.

FCC STATEMENT

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Statement

To maintain compliance with FCC's RF Exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. Use only the supplied antenna.